• Journal of Bio-Environment Control
• /
• v.26 no.2
• /
• pp.72-77
• /
• 2017

This study was conducted to examine the effect by application method and concentration of plant growth regulator (PGR) on the growth and runner production of strawberry (Fragaria ${\times}$ ananassa Duch. cv. Maehyang) in a velno-type greenhouse. The seedlings of strawberry were transplanted in pot ($64{\times}27{\times}18cm$) filled with commercial mixed medium (Tosilee) on February 22nd, 2016. The 6-benzylaminopurine (6-BAP) was applied with foliar spray or drench, respectively as 900, 1,200 or $1,500mg{\cdot}L^{-1}$ (50 mL per plant) at 3 weeks after transplanting. Nutrient solution was sufficiently supplied by the drip irrigation as EC $0.65dS{\cdot}m^{-1}$ for rooting during 7 days. After rooting, the 450 mL nutrient solution supplied per pot twice a day (10 min). Plant height and crown diameter of 'Maehyang' mother plant appeared no significantly difference. The other growth characteristics, such as root length, number of primary roots, leaf length, leaf width, leaf area and fresh and dry weights of the shoot or root, were significantly the greatest in the control. And, the SPAD value of strawberry was the highest as 44.2 in the drench with $900mg{\cdot}L^{-1}$. The foiler spray was more effective in runner production than drench, and the number of runners appeared high values at the 900 and $1,500mg{\cdot}L^{-1}$. Whereas, the number of strawberry plantlets was effective in the drench. The results indicate that both growth and the number of runners of strawberry plant were the best achieved by foliar spray application at the $900mg{\cdot}L^{-1}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.870-876
• /
• 2005

The multiple regression models which have two factors(population and commercial area) have been used to forecast the water demand in the future. But, the coefficient of population had a negative value because proper regional classification wasn't performed, and it is not reasonable because the population must be a positive factor. So, the regional classification was performed by principal component and cluster analysis to solve the problem. 6 regional characters were transformed into 4 principal components, and the areas were divided into two groups according to cluster analysis which had 4 principal components. The new regression models were made by each group, and the problem was solved. And, the future water demands were estimated by three scenarios(Active, moderate, and passive one). The increase of water demand ore $89.034\;m^3/day$ in active plat $49,077\;m^3/day$ in moderate plan, and $19,996\;m^3/day$ in passive plan. The water supply ability as scenarios is enough in water treatment plant, however, 2 reservoirs among 4 reservoirs don't have enough retention time in all scenarios.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.1
• /
• pp.10-17
• /
• 2001

Purpose: We measured anti-H. pylori IgG in Korean elementary school children living in Shinchon area of Seoul, Korea to evaluate the influence of environmental living standards on H. pylori infection. Methods: IgG antibodies to H. pylori were measured in plasma using a commercial ELISA kit (GAP IgG Helicobacter pylori, Bio-Rad Laboratories Inc., Hercules, CA, USA). Information on environmental status such as place of birth, parental income, type of housing, number of persons in the household, parents' occupation, family history of peptic ulcer disease and gastric cancer was obtained. Statistical analysis was done by Chi-square and logistic regression test using SPSS $7.0^{TM}$ for Windows. Results: Study subjects consisted of 571 children, and the age distribution ranged from 6.0 to 13.6 years with a mean of $9.6{\pm}1.8$ years. Male-to-female ratio was 1.1:1. The seropositive rates of H. pylori infection ranged from 10.4% in children aged 6 years to 30.9% in 12 year-old group, overall 16.8%. The prevalence of H. pylori infection progressively increased with age, but there was no significant difference in seropositive rates among children in different age groups (p=0.06). Seropositive rates of anti-H. pylori IgG on the basis of gender, place of birth, parental income, type of housing, parents' occupation, family history of peptic ulcer disease and gastric cancer showed no statistically significant difference. Interestingly, however, seropositive rate of anti-H. pylori IgG showed statistical significance in relation to number of persons in the household (p=0.003; Odds ratio 1.50 by logistic regression test). Conclusion: These results suggest that number of persons in the household is the most important factor among environmental living standards, and that risk of H. pylori infection increases by increment of 1.5 times as the number of persons in the household increases by one.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.769-782
• /
• 2005

Twenty four Holstein steers fed commercial concentrates with rice straw(T1), mixed grass hay(T2), or wet brewer’s grains based TMR ad libitum(T3) were used to investigate the effects of roughage feeding type during the growing and early-fattening periods on growth performance, feed efficiency and carcass characteristics. Growth performance and feed efficiency were investigated during the feeding trial conducted from 6 to 23 mo of age, and carcass characteristics were investigated after slaughter. Body weight at slaughter and daily gains were 751 to 802 kg(mean 782 kg) and 1.064 to 1.159 kg/d(mean 1.122 kg/d), respectively, showing that those for T2 were highest followed by T3. Compared with T1, the daily gain for T2 was improved by 8.9%. The TDN intakes per kg gain were 6.87, 7.17 and 7.15 kg for T1, T3 and T2, respectively, indicating that feed efficiency for T2 was improved(approx. 5%) compared with T1. The feeding treatments did not change dressing percentage(mean 60.8%), back fat thickness(6.68 mm) and rib-eye area(84.0$cm^2$). Neither meat quality characteristics nor physicochemical properties were significantly different among the treatments. However, economic analysis accounting for 882.8, 991.7 and 943.8 thousand won per head for T1, T2 and T3, respectively, indicated that T2 and T3 increased(7-12%) total net income compared with T1. Therefore, it may be concluded that high quality meat of Holstein steers can be produced if they are fattened until 23 mo of age and that feeding mixed grass hay as roughage or TMR containing mainly wet brewer's grains during the growing and early-fattening periods can improve growth performance compared with feeding rice straw.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.251-258
• /
• 2005

This study was conducted to examine the effect of application of pig manure slurry(PMS) for rye cultivation in Paddy-land on rice productivity The field experiments were carried out from 1999 to 2002 on well-grown rice in Paddy-land at Kimje, Chunbuk province in Korea. PMS was manufactured by the fermentation for 6 months in natural condition. Amount of PMS was adjusted equal to total nitrogen value relative to its value of commercial chemical fertilizers. The amount of PMS were spread evenly over the soil surface two times; first in the autumn (before sowing, end of November) and second in the spring(regrowth of rye, middle of March). The field plots were consisted of four kinds (PMS $100\%$ treatment, PMS $200\%$ treatment PMS $100\%$ treatment with half of CF (CF $50\%$), Full of CF treatment (CF $100\%$). The experiment was designed as a randomized complete block. Each treatment was replicated three times. Rices are customarily gown under tropical korean condition as annuals. The results obtained from this study were summarized as fellows. Panicle length of rice was shorter in PMS $100\%$ than other treatments. Ripening grain ratio was the lower in CF treatment. In treatment of PMS $100\%$ and PMS $200\%$, 1000 grain weight was a downward trend as compared to that of full of CF treatments, whereas number of grains per $m^2$ was increased as compared to other treatments. Number of panicles reveals that there is an increase in order; CF $50\% + PMS\;100\%>\;PMS\;100\%\;>\;CF\;100\%\;>\;PMS\;200\%$. Yield of milled rice showed hi인 in CF $100\%$ and $CF 50\%+ PMS 100\%$, but were was no significant difference among treatments. There were did not a regular tendency in the ratio of leaf sheath bright, however the ratio of lodging area was higher in $CF50\%+PMS\;100\%$ treatment than other treatments. Based on the results of this experiment, $CF 50\%+PMS\;100\%$ may be the most effective in rice productivity under application of PMS for rye cultivation in Paddy-land.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.317-326
• /
• 2019

Salinity which is often detected on reclaimed land is a major detrimental factor to crop growth. It would be advantageous to develop an approach for assessment of salinity and drought damages using a non-destructive method in a large landfills area. The objective of this study was to examine applicability of the decision tree classifier using imagery for classifying for spring potatoes (Solanum tuberosum) damaged by salinity or drought at vegetation growth stages. We focused on comparing the accuracies of OA (Overall accuracy) and KC (Kappa coefficient) between the simple reflectance and the band ratios minimizing the effect on the light unevenness. Spectral merging based on the commercial band width with full width at half maximum (FWHM) such as 10 nm, 25 nm, and 50 nm was also considered to invent the multispectral image sensor. In the case of the classification based on original simple reflectance with 5 nm of FWHM, the selected bands ranged from 3-13 bands with the accuracy of less than 66.7% of OA and 40.8% of KC in all FWHMs. The maximum values of OA and KC values were 78.7% and 57.7%, respectively, with 10 nm of FWHM to classify salinity and drought damages of spring potato. When the classifier was built based on the band ratios, the accuracy was more than 95% of OA and KC regardless of growth stages and FWHMs. If the multispectral image sensor is made with the six bands (the ratios of three bands) with 10 nm of FWHM, it is possible to classify the damaged spring potato by salinity or drought using the reflectance of images with 91.3% of OA and 85.0% of KC.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.211-216
• /
• 2011

This study was carried out to clarify precise $CO_2$ demands of paprika plants (Capsicum annumm L.) by measuring photosynthesis rates of the leaves in high, low positions, and the $CO_2$ consumption of a whole plant in a large sealed chamber. A photosynthesis measuring system (LI-6400) was used to measure the photosynthetic rates of the leaves located in different positions. A large sealed chamber that can control inside environmental factors was developed for measuring $CO_2$ consumption by a whole paprika plant. With increase of radiation, photosynthetic rates of the leaves in higher position became larger than those in lower position. The $CO_2$ consumption by the plant was estimated by using decrement of $CO_2$ concentration from initial level of 1500 ${\mu}mol{\cdot}mol^{-1}$ in the chamber with increase of integrated radiation. A regression model for estimating $CO_2$ consumption by the plant (leaf area = 7,533.4 $cm^2$) was expressed with integrated radiation (x) and was suggested as $y=-0.06234+3.671^*x/(2.589+x)$ ($R^2=0.9966^{***}$). The photosynthetic rate of the whole plant measured in the chamber was 3.4 ${\mu}mol\;CO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under 300 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity, which is in-between photosynthetic rates of the leaves in high and low positions. For this reason, some differences between required and supplied $CO_2$ amounts in greenhouses might occur when depending too much on photosynthetic rates of leaves. Therefore, we can estimate more accurately $CO_2$ amount required in commercial greenhouses by using $CO_2$ consumption model of a whole plant obtained in this study in addition to leaf photosynthetic rate.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.224-232
• /
• 2012

This study was performed to investigate the pesticide residue of commercial medicinal plants used for food materials in the Seoul area. Multi class pesticide multiresidue methods in Korea Food Code was used to analyze 100 pesticides. Analyzed samples were 261 cases(domestic 201, imported 60), detection rate was 19.2%(domestic 20.9%, imports 13.3%). 17 pesticides were detected in fruit(chinese matrimony vine, jujube, rubus coreanus, japanese cornlian cherry, schizandra, tangerine peel), and root(cnidium, licorice, astragalus). Pesticide over Maximum Residue Limits were detected in jujube, cnidium. Frequently detected pesticides were cypermethrin, chlorpyrifos, cyhalothrin, fenvalerate, bifenthrin. More than 50% of the sample were detected two or more pesticides at the same time. Because of the variety and increase of pesticide detection in medicinal roots and fruits, continued monitoring and safety management is required.

• Fiber Technology and Industry
• /
• v.2 no.4
• /
• pp.490-508
• /
• 1998

One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.