• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.1
• /
• pp.48-54
• /
• 2007

Bacillus polyfermenticus SCD (B. polyfermenticus SCD) has been appropriately used for the therapy of long-term intestinal disorders, because live strains in the form of active endospores can successfully reach the target intestine in humans. B. polyfermenticus SCD produces the most antibiotic-related materials. In the present study, B. polyfermenticus SCD was fermented with soybeans (BPFS) and its probiotic properties were investigated. B. polyfermenticus SCD and BPFS showed a broad spectrum of antimicrobial activity against pathogenic Gram-positive (Streptococcus parauberis, Streptococcus iniae, Lactococcus garviae) and Gram-negative (Flexibacter tractuosus, Vibrio harveyi, Vibrio vulnificus, Vibrio ordalii) bacteria and moulds (Aspergillus niger, Aspergillus oryzae). Sebastes schlegeli were used to examine survival rate and cleanup action by BPFS. Bacterial infection resulted in a mortality of up to 99% in the commercial fodder fed groups. BPFS both enhanced the growth rate of fry by improving their appetite and had cleaned by decreased eutrophication. Therefore, it seems appropriate that BPFS should be developed as an antibiotic replacement, favorable fodder additive, and antifungal material in fish farming systems.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.160-170
• /
• 2011

Commercial formulation of fungicides was studied in vitro for sensitivity against Typhula species causal agents of Typhula blight. Efficacies of fungicides application, spray volume, nozzle types and fungicides applied time (early fall and late fall) were evaluated for their influence on the chemical control of Typhula blight of turfgrass during the winter season in Wisconsin. All fungicides effectively reduced the mycelial growth of eight isolates of Typhula spp. in vitro on potato dextrose agar (PDA) media. For inhibitory effects on mycelial growth of eight isolates, propiconazole was the most effective at $1.0{\mu}g$ active ingredient (a.i) / ml of PDA. Typhula incarnata two isolates were significantly more sensitive to all fungicides of PDA than six isolates of three varieties of T. ishikariensis. For 2 years in field experiment, unsprayed control has significantly more disease severity than seven fungicides were applied to field plots at two locations. Propiconazole was the most effective for controlling Typhula blight, at two locations in both years. The level of disease control was not dependent on fungicides spray volume or nozzle types at two locations. The disease damage treated with triadimefon applied time (early fall and late fall) was not significantly different at two location for two years.

• The Journal of Society for e-Business Studies
• /
• v.10 no.1
• /
• pp.61-80
• /
• 2005

Business Process Management (BPM) System is a software system to support an efficient execution, control and management of business processes. The system automates complex business processes and manages them effectively to raise productivity. Traditional commercial systems mainly focus on automating processes and do not have methods for enhancing process performances and task performer's efficiency. Therefore, there is room for enhancement of task performers' productivities and efficiency of business processes. In this paper, we propose a new method of executing business processes more efficiently in that a whole process is scheduled considering the degree of participants' workload. The method allows managing the largest constraints among constituent resources of the process. This method is based on the DBR (Drum-Buffer-Rope) in TOC (Theory of Constraints) concepts. We first consider the differences between business process models and DBR application models, and then develop the modified drum, buffer and rope. This leads us to develop BP-DBR (Business Process-DBR) that can control the proper size of task performers' work list and arrival rate of process instances. Use of BP-DBR improves the efficiency of the whole process as well as participants' working condition. We then carry out a set of simulation experiments and compare the effectiveness of our approach with that of the scheduling techniques used in existing systems.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.62-72
• /
• 2010

PM OLED is used in many applications as one of the display for the next generation. The most essential problems are the power dissipation and the short life time in applying PM OLED into a commercial application. Many efforts are made in developing the panel and in improving the circuit for expanding the current market wider. The life time in PM OLED is expanded by lessening the power dissipation of the circuit for the magnitude of the driving current is lowered. It is possible to minimize the power dissipation from improving the driving technology. The classical technology, Row-to-Row driving, is that row is selected one by one while applying the column current input individually. The multi-line driving is a new technology which is to select multiple rows simultaneously while applying the column current as a whole. However, the solution of the multi-line driving is NP-complete problem. The efficiency is dependant on the sort of picture and the driving condition. This paper presents the new efficient multi-line driving which is that the multiple lines are selected by applying column current together after grouping the simultaneous driving group applying the gnew efficient muthe coi-line dr coefficient. Bengrouping the several rows which has the higher coi-line dr coefficient, the more efficient driving is realized to present the high quality image and to lessen the power dissipation and to stretch the life time in the PM OLED.

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.156-162
• /
• 2005

Particularly in research related to seawater intrusion the change of fluid electrical conductivity is one of major concerns, and effective monitoring can help to optimize a water pumping performance in coastal areas. Special considerations should be given to the mounting of sensors at proper depth during the monitoring design since the vertical distribution of fluid electrical conductivity is sensitive to the characteristics of seawater intrusion zone. This tells us the multi-channel electrical conductivity monitoring is of paramount consequence. It, however, is a rare event when this approach becomes routinely available in that commonly used commercial stand-alone type sensors are very expensive and inadequate for a long term monitoring of electrical conductivity or water level due to their restricted storage and difficulty of real-time control. For this reason, we have developed a real-time monitoring system that could meet these requirements. This system is user friendly, cost-effective, and easy to control measurement parameters - sampling interval, acquisition range, and others. And this devised system has been utilized for the electrical conductivity monitoring in boreholes, Yeonggwang-gun, Korea. Monitoring has been consecutively executed for 24 hours, and the responses of electrical conductivity at some channels have been regularly increased or decreased while pumping up water. It, with well logging data implemented before/after pumping water, verifies that electrical conductivity changes in the specified depths originate from fluid movements through sand layer or permeable fractured rock. Eventually, the multi-channel electrical conductivity monitoring system makes an effective key to secure groundwater resources in coastal areas.

• Nuclear Engineering and Technology
• /
• v.47 no.4
• /
• pp.479-487
• /
• 2015

The thallium-doped sodium iodide [NaI(Tl)] scintillation detector is preferred as a gamma spectrometer in many fields because of its general advantages. A silicon photomultiplier (SiPM) has recently been developed and its application area has been expanded as an alternative to photomultiplier tubes (PMTs). It has merits such as a low operating voltage, compact size, cheap production cost, and magnetic resonance compatibility. In this study, an array of SiPMs is used to develop an NaI(Tl) gamma spectrometer. To maintain detection efficiency, a commercial NaI(Tl) $2^{\prime}{\times}2^{\prime}$ scintillator is used, and a light guide is used for the transport and collection of generated photons from the scintillator to the SiPMs without loss. The test light guides were fabricated with polymethyl methacrylate and reflective materials. The gamma spectrometer systems were set up and included light guides. Through a series of measurements, the characteristics of the light guides and the proposed gamma spectrometer were evaluated. Simulation of the light collection was accomplished using the DETECT 97 code (A. Levin, E. Hoskinson, and C. Moison, University of Michigan, USA) to analyze the measurement results. The system, which included SiPMs and the light guide, achieved 14.11% full width at half maximum energy resolution at 662 keV.

• Korean Journal of Organic Agriculture
• /
• v.13 no.1
• /
• pp.85-99
• /
• 2005

This trial was carried out to determine effects of organic feeds in comparison to conventional diet on feed intake, digestibility, and nitrogen retention in Korean native goats. Twelve Korean native goats were allotted to treatments in four groups of three goats and then they were housed in separate metabolism cages for 21 days. Treatments included conventional diet (A) as a control group and three organic feed groups (B: organic rice straw, C: organic nee leaves, D: organic mixture of rice straw and tree leaves). The A treatment, conventional diet, consisted of common rice straw and commercial concentrates at a proportion of 60 and 40%, respectively. All ingredients of organic feeds treatments were organically produced-agricultural products without any application of chemical fertilizer and pesticide. Four experimental diets were formulated to have the same ratio of forage to concentrate and similar contents for protein and carbohydrate across treatments and they were offered to goats ad libitum. Feed intake, apparent nutrient digestibility and nitrogen retention were investigated. For chemical compositions of experimental diets, all nutrients except crude ash and ether extract were not significantly different across treatments as we expected. Crude ash content was highest in the A treatment (P<0.05), however, it was not significantly different among organic feeds treatments. Ether extract content was higher (P<0.05) in C and D treatments than in A and B. Even if dry matter intakes for organic feeds treatments were not significantly different among them, they were significantly higher (P<0.05) compared with conventional diet. Fecal excreta were not significantly different across treatments, resulting in significantly higher digestible dry matter (g/day) in treatments of organic feeds (P<0.01). Average daily gain (ADG) and feed efficiency (FE) were more increased (P<0.01) in treatments of organic feeds compared with conventional diet. Digestibilities for most of nutrients except NFC had the same trend as ADG and FE, however, NFC digestibilities for C and D treatments were significantly lower (P<0.01) than those of A and B. Nitrogen intakes for organic feeds treatments were significantly higher (P<0.001) than conventional diet, with no difference among organic feeds treatments. Fecal nitrogen loss was higher (P<0.05) for C and D treatments than for A and B. Retained nitrogen contents were significantly higher (P<0.05) for organic feeds treatments than for conventional diet, but nitrogen retention rate did not show any difference across treatments. The results showed that organic feed supplementation more improved feed intake, digestibility and nitrogen retention in comparison with conventional diet, and thus they could be concluded that organic feeds might contribute to animal performance and a safer production of animal product.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.351-356
• /
• 2007

The objective of this study was to develop a rapid and reliable method for the sex determination of beef using the PCR(polymerase chain reaction) technique. We have used two bovine sex determining genes, SRY and ZFY, on the Y-chromosome to identify the sex of Hanwoo and Holstein beet. We attempted to amplify 1,348 bp and 979 bp fragments from male and female genomic DNA corresponding to the SRY and ZFY genes, respectively, using male specific primers. The amplified PCR products were separated by electrophoresis in a 1.5% agarose gel to detect a male specific DNA band. When DNA from male beef was amplified with primers specific for the SRY gene, a DNA band of 1,348 bp was present in all of the male samples, but absent from all of the female samples. Also, when DNA from male beef was amplified with primers specific for the ZFY gene, a DNA band of 979 bp was observed in all of the male samples, but absent from all female samples. In conclusion, the bovine SRY and ZFY genes are typically found only in male beef. For the practical application of this method for the sexing of commercial beef at the processing and marketing stages after slaughter. a total of 350 beef samples collected randomly from local markets were analyzed for sex determination. The proportions of male and female samples were 252 (72%) and 98 (28%), respectively. Therefore. the SRY and ZFY genes. which are specific for the Y-chromosome, may be useful sex-diagnostic DNA markers to distinguish male meat from female meat.

• Journal of Environmental Health Sciences
• /
• v.43 no.2
• /
• pp.103-110
• /
• 2017

Objectives: This study was performed to provide basic data for the re-establishment of standards (criteria) and analytical methods for hazardous metals in nail enamel. Methods: Ten metals (lead; Pb, arsenic; As, cadminum; Cd, antimony: Sb, cobalt; Co, nikel; Ni, copper; Cu, chromium; Cr, aluminum; Al, and mercury; Hg) were measured in 67 commercial nail enamels containing glitter and/or pearls. The content of hazardous metals (excepting Hg) was determined by using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES) after microwave digestion. Mercury content was measured by a mercury analyzer without any preparation. Results: The detected ranges of the intact samples were as follows: $ND-1.756{\mu}g/g$ for Pb, $ND-1.24{\mu}g/g$ for As, ND for Cd, $ND-20.41{\mu}g/g$ for Sb, $ND-12.36{\mu}g/g$ for Co, $ND-7.908{\mu}g/g$ for Ni, $0.088-79.27{\mu}g/g$ for Cu, $0.281-18.54{\mu}g/g$ for Cr, $13.78-3563{\mu}g/g$ for Al, and $ND-0.044{\mu}g/g$ for Hg. After centrifugation, the detected ranges of supernatant were as follows: $ND-0.435{\mu}g/g$ for Pb, $ND-0.504{\mu}g/g$ for As, ND for Cd, $ND-0.035{\mu}g/g$ for Sb, $ND-13.17{\mu}g/g$ for Co, $ND-0.232{\mu}g/g$ for Ni, $0.117-90.07{\mu}g/g$ for Cu, $0.174-2.787{\mu}g/g$ for Cr, and $9.459-1565{\mu}g/g$ for Al. The results of this analysis showed that the levels of heavy metals such as Pb, As, and Sb were much higher in the intact samples than those of supernatant. Conclusion: In the present study, we found that the levels of hazardous metals were significantly different depending on the status of the presence of glitter. Based on the results, we recommend that the product consumer refrain from prolonged application of nail enamel, avoid biting or chewing the nails, and wear gloves during cooking and washing dishes.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.5
• /
• pp.261-276
• /
• 2020

This study seeks to find an effective support plan through the success factors recognized in the early stages of startup and those recognized after success by grasping the success factors of successful small business entrepreneurs at each stage from the pre-start stage to the growth stage. To this end, a qualitative study through interviews was conducted with successful convenience store franchisees to derive success factors from the start-up preparation stage to the early stage and growth stage. The success factors of starting a small business were studied in consideration of the characteristics of franchise convenience store startups using the ERI model and the ERIS model applied in the study on the performance of startups. The success factors were studied using the multisite service firm life cycle of Sasser et al.(1978) reflecting the results. As a result of the study, the key factors of successful franchisees were the selection of the location of the first store, the selection of strategic additional stores, and the successful renewal of the contract. Depending on the characteristics of the founder, the enterprising franchisees took an active attitude in selecting strategic locations for additional stores and defending the commercial district, while the relatively conservative franchisees showed an active attitude toward store operation and renewal from a management perspective. In particular, the entrepreneur's mind is important in the preparation stage, and the importance of the entrepreneur's management strategy was discovered in the entire business cycle. Based on the results of this study, this study specifically sought out a start-up plan to effectively apply it to the future growth stage.