• Clinical and Experimental Reproductive Medicine
• /
• v.15 no.2
• /
• pp.129-133
• /
• 1988

Combined (intra and extrauterine) pregnancy refers to impregnations of two different ova at intrauterine and extrauterine sites simultaneously or within a short time interval each other. It is a rare clinical entity and freqently missed in early diagnosis in most instances. Its incidence rate is about 1 in 30,000 pregnancies and the incidence was rised in cases of using ovulation induced agents. The diagnostic rate is less than 10% at early process of the disease. We experienced a case of intrauterine and left tubal pregnancy as combined pregnaney in ovulation cycle which had been induced by clomiphene citrate and now present it with brief review of related leteratures.

• Korean Journal of Microbiology
• /
• v.7 no.2
• /
• pp.45-56
• /
• 1969

The rapid deterioration of fermented rice-wine, called Tak Joo and Yak Joo, is one of the serious problems for brewing and marketing in Korea. In this study the biochemical and microbiological investigations have been performed for extension of shelf-life of the rice-wine by the method of combined heat and radiopasteurization. Major microflora in this wine is proved as Saccharomyces cereoisiar, which is destroyed by h-at treatmznt ($70^{\circ}C$, 10 min.) combined with gamma-irradiation of 240 K, rads doses. The changes of chemical constituents of them were investigated during the storage period at room temperatures of summer days($33^{\circ}C$). The results of sensory test for gamma-irradiated rice-wine with lower doses show no significant unfavourable off-odor nor color change compared with the fresh rice-wine. Therefore, it is revealed that the combined process makes possible extension of shelf-life of fermented rice-wine in markets without any deterioration and loose of its particular tastes at least for three weeks.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.39-45
• /
• 2018

In this study, the International Maritime Organization (IMO)'s guideline MEPC. 277 (64) was developed and evaluated for the removal efficiency of T-N in a SBR and MBR combined process. This combined process of resized equipment based on large capacity water treatment device for a protection of marine aquatic life. In this experiment, T-N concentration of influent and effluent was measured through with the artificial wastewater. The SBR reactor operation time was varied according to the C : N : P ratios so that different conditions for mixing and aeration period in mins (90 : 60, 80 : 40, 70 : 50) and two C: N: P ratios (10 : 5 : 3, 10 : 3 : 1) were used. During experiment in the reactor's aeration and anoxic tank DO concentrations were 3 mg/L and 0.2 mg/L respectively. Furthermore, in the reactor MLSS concentration was 2000 mg/L and flowrate was 2 L/hr. Experiment results showed that C : N : P, 10 : 3 : 1 ratio with 90 mins mixing and 60 mins aeration maximized removal efficiency at 97.3% T-N as compared to other conditions. The application of the SBR and MBR combined process showed efficient results.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.11
• /
• pp.1139-1145
• /
• 2008

The objectives of this research are to investigate the mechanism of coagulation affecting UF and find out the optimum conditions of the combined of coagulation with UF membrane filtration for NOM removal. During the mixing period, substantial changes in particle size distribution occurred under rapid and slow mixing condition due to the simultaneous formation of microflocs and NOM precipitates. Therefore, combined pretreatment using coagulation (both rapid mixing and slow mixing) improved dissolved removal efficiency. Also, for combined coagulation to membrane process, flux reduction rate showed lower than only UF process. The rate of flux decline for the hydrophobic membrane was considerably greater than for the hydrophilic membrane. Applying coagulation process before membrane filtration showed not only reducing membrane fouling, but also improving the removal of dissolved organic materials that might otherwise not be removed by the membrane.

• Fire Science and Engineering
• /
• v.28 no.6
• /
• pp.108-113
• /
• 2014

The combined process of Sliding Arc Plasma and corona dielectric barrier discharge process (CDBD) was used to efficiently improve harmful substance, which convert into OH radicals which have strong oxidation potential, and so have deodorization and sterilizing effects, by generating specific radicals and anion and then reacting with the moisture contained in harmful substance. As a result of experiment, even if the size of SAP reactor is reduced from 80 A to 50 A, there is no much change and therefore it is judged the size of reactor may be minimized. And it was confirmed that after the anion and ozone generated from CDBD rector react with harmful substance, a anion was reduced from 510,000 ppb to 470 ppb and ozone from 98 ppb to 22 ppb. It was also judged the stability and durability of plasma producer are excellent. Accordingly, it is considered the harmful substances which exist in indoor air quality will be efficiently improved and removed by using further plasma combined process through this study.

• Clean Technology
• /
• v.24 no.4
• /
• pp.357-364
• /
• 2018

Studies on the production of biogas from third generation biomass, such as micro- and macroalgae, have been conducted through experiments of various scales. In this paper, we investigated the feasibility of commercialization of integrated combined heat and power (CHP) production using biogas derived from macroalgae, i.e., seaweed biomass. For this purpose, an integrated CHP plant of industrial scale, consisting of solid oxide fuel cells, gas turbine and organic Rankine cycle, was designed and simulated using a commercial process simulator. The cost of each equipment in the plant was estimated through the calculated heat and mass balances from simulation and then the techno-economic analysis was performed. The designed integrated CHP process produces 68.4 MW of power using $36ton\;h^{-1}$ of biogas from $62.5ton\;h^{-1}$ (dry basis) of brown algae. Based on these results, various scenarios were evaluated economically and the levelized electricity cost (LEC) was calculated. When the lifetime of SOFC is 5 years and its stack price is $$225kW^{-1}$, the LEC was 12.26 ¢ $kWh^{-1}$, which is comparable to the conventional fixed power generation.

• Journal of Korean Society on Water Environment
• /
• v.27 no.3
• /
• pp.293-299
• /
• 2011

The quantity of a discharge load can change with changes in rainfall in the area with a combined sewer system (CSS). To evaluate the implementation appropriately in the management of total maximum daily loads (TMDLs), the effects of rainfall changes should be considered in the estimation of the discharge load. The rainfall condition for the estimation of the discharge load in a certain year should be standardized to the same rainfall condition as that of the reference year. However, the calculation process is very complicated with its potential limitations. This study investigated and developed relatively simple methods for estimating the discharge load. Load conversion method (LCM) is designed to convert the discharge load under the current rainfall condition into that of the reference rainfall conditions. Simple rainfall data method (SRDM) is to simplify the estimation process of the discharge load by the simple conversion of rainfall data. These methods were applied to calculate the discharge load and examine the estimation results. From the results of this study the application of these methods may be useful for estimating the discharge load in the TMDL process.

• KSBB Journal
• /
• v.19 no.4
• /
• pp.245-249
• /
• 2004

A combined method of autolysis and enzymatic hydrolysis of baker's yeast was developed for the production of yeast extract, which is widely used as a natural food ingredient. From statistical analysis, NaCl and ethanol addition were found to be significantly effective factors in autolysis of yeast. The optimum dosages of salt and ethanol were 3% and 1%, respectively. Heat treatment and the use of cell lytic enzyme were not significantly effecting on the autolysis. Yeast hydrolysate was prepared by autolysis, followed by enzymatic hydrolysis using proteases, nuclease and deaminase. Additionally, the hydrolysate was processed by downstream process including Maillard reaction and debittering. The total dry matter yield and total nitrogen yield for the process were 76% and 59%, respectively. Compared to a process using brewer's yeast, when baker's yeast was used as a raw material, a higher recovery yield was obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1294-1298
• /
• 2005

In this study, combined micro press and surface finishing process are proposed to fabricate the micro nozzle array on a stainless steel sheet metal. In micro hole punching process the burr occurs inevitably, but the burr must be minimized in order to improve the quality and accuracy of the product. For this reason, subsequent magnetic field-assisted finishing technique is applied to remove the burr which exists around the nozzles for ink-jet printer head and proved to be a feasible for deburring by experiment. The deburring characteristics of sheet metals were investigated changing with polishing time and magnetic abrasive size. After the deburring, the burr size has remarkably reduced and roundness of the hole also has improved.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.13-20
• /
• 2015

Many automotive companies are endeavoring to improve the quality of resistance spot welding by updating body-in-white (BIW) production line with adaptive control spot welding system to compensate the process disturbances such as gap, electrode wear, oxidized surfaces, poor fit up and adhesive etc. Most of the commercial adaptive weld controllers require proper "Initial Welding Schedule" or "Reference weld" to achieve compensation in welding parameters during real time welding. In this study, the compensation of a commercial adaptive weld controller had been observed and analyzed thoroughly for various process disturbances to find optimal initial welding schedule. It was observed that 90 percent of the expulsion current in constant current control as reference welding schedule conferred the maximum button diameter in adaptive control welding. Finally, effects of each disturbance in combined field disturbances system with adaptive control had also been confirmed with the design of experiment (DOE) by minitab(R)16 for combined disturbances situation and suitability of optimum initial weld current had also established with real body part validation test.