• Title/Summary/Keyword: combination tests

Search Result 736, Processing Time 0.027 seconds

Hybrid Effects of Carbon-Glass FRP Sheets in Combination with or without Concrete Beams

  • Kang, Thomas H.K.;Kim, Woosuk;Ha, Sang-Su;Choi, Dong-Uk
    • International Journal of Concrete Structures and Materials
    • /
    • v.8 no.1
    • /
    • pp.27-41
    • /
    • 2014
  • The use of carbon fibers (CF) and glass fibers (GF) were combined to strengthen concrete flexural members. In this study, data of tensile tests of 94 hybrid carbon-glass FRP sheets and 47 carbon and GF rovings or sheets were thoroughly investigated in terms of tensile behavior. Based on comparisons between the rule of mixtures and test data, positive hybrid effects were identified for various (GF/CF) ratios. Unlike the rule of mixtures, the hybrid sheets with relatively low (GF/CF) ratios also produced pseudo-ductility. From the calibrated results obtained from experiments, a new analytical model for the stress-strain relationship of hybrid FRP sheets was proposed. Finally, the hybrid effects were verified by structural tests of concrete members strengthened with hybrid FRP sheets and either carbon or glass FRP sheets.

Wind pressures on a large span canopy roof

  • Rizzo, Fabio;Sepe, Vincenzo;Ricciardelli, Francesco;Avossa, Alberto Maria
    • Wind and Structures
    • /
    • v.30 no.3
    • /
    • pp.299-316
    • /
    • 2020
  • Based on wind tunnel tests, this paper investigates the aerodynamic behavior of a large span canopy roof with elliptical plan and hyperbolic paraboloid shape. The statistics of pressure coefficients and the peak factor distributions are calculated for the top and bottom faces of the roof, and the Gaussian or non-Gaussian characteristics of the pressure time-histories in different areas of the roof are discussed. The cross-correlation of pressures at different positions on the roof, and between the top and bottom faces is also investigated. Combination factors are also evaluated to take into account the extreme values of net loads, relevant to the structural design of canopies.

Essential Oil Compounds from Agastache rugosa as Antifungal Agents Against Trichophyton Species

  • Shin, Seung-Won
    • Archives of Pharmacal Research
    • /
    • v.27 no.3
    • /
    • pp.295-299
    • /
    • 2004
  • The antifungal activities of the essential oil from Agastache rugosa and its main component, estragole, combined with ketoconazole, one of the azole antibiotics commonly used to treat infections caused by Trichophyton species, were evaluated in this study. The combined effects were measured by the checkerboard microtiter and the disk diffusion tests, against T. erinacei, T. mentagrophytes, T. rubrum, T. schoenleinii and T. soudanense. Susceptibility of the five Trichophyton species to the oil alone, or ketoconazole alone, differed distinctly. The fractional inhibitory concentration indices (FICI) of ketoconazole combined with estragole or A. rugosa essential oil, against the tested Trichophyton species, were between 0.05 and 0.27, indicating synergistic effects. These drug combinations exhibited the most significant synergism against T. mentagrophytes, with FICIs of 0.05 and 0.09 for estragole and the essential oil fraction from A. rugosa, respectively. Isobolograms based on the data from checkerboard titer tests also indicated significant synergism between ketoconazole and the Agastache oil fraction or estragole, against the Trichophyton species evaluated. Trichophyton susceptibility to ketoconazole was significantly improved by combination with the Agastache rugosa oil fraction or its main component, estragole.

The study for performance of isolators supported floating slab track (플로팅 슬래브궤도용 방진재의 성능에 관한 연구)

  • Kim, Jin-Ho;Cha, Hyo-Jung
    • Proceedings of the KSR Conference
    • /
    • 2007.11a
    • /
    • pp.569-574
    • /
    • 2007
  • The paper presents an application of the model to a practical problem of train-induced vibrations. The aim of this study is to vertify for performance of isolators which was developed in KRRI supported floating slab track. Laboratory tests on developed isolations show that the energy dissipation, under cyclic loading of constant amplitude, can be suitably represented by a combination of a viscous and a hysteretic damping. Also, other tests for structural performance are carried out, such as elastic material test, compression test and so on. The specimen, $400{\times}400{\times}300mm$, is placed between two stiff steel plates designed to uniformly distribute the compression stress on the surface.

  • PDF

Innovative Approaches to Increase the Longevity of PRBs Containing Zero-Valent Iron

  • 이태윤;박재우;최은경;허보연
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2002.09a
    • /
    • pp.122-124
    • /
    • 2002
  • The removal capacity of zero-valent iron for Cr(Ⅵ) was evaluated using batch kinetic tests. The rate constants for zero-valent iron dramatically increased as initial Cr(Ⅵ) concentration decreased. Generally, the reaction rates of Cr(Ⅵ) with zero-valent iron were faster than that of a biotic degradation of Cr(Ⅵ), and furthermore the reaction rates were inversely proportional to the initial Cr(Ⅵ) concentrations. After certain reaction time elapsed. no further decrease of Cr(Ⅵ) was observed, indicating a loss of iron reactivity. The loss of iron reactivity was primarily due to the passivation of iron surfaces with iron-Cr precipitates, but the reactivity of iron was recovered by adding iron-reducing bacteria. Even though the addition of bacteria itself removed Cr(Ⅵ), the combination of iron-reducing bactera and oxidized iron significantly enhanced the reaction rate for Cr(Ⅵ) removal. The results from column tests also confirmed that the innoculation of iron-reducing bacteria to the column containing completely oxidized iron partially enhanced the recovery of the iron reactivity.

  • PDF

A Study on Increase of Bearing Capacity of Dense Sandy Ground installed by Vertical Micropiles (연직 마이크로파일이 설치된 조밀한 모레지반의 지지력 증가에 관한 연구)

  • 최상민;임종철;이태형;공영주
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2001.03a
    • /
    • pp.355-362
    • /
    • 2001
  • Since micropiles were conceived in Italy in the early 1950s, which have been widely used for In-situ reinforcement, bearing pile or the concept of combination in the world-wide. The meaning of micropiles usually differs from that of a general deep foundation. Because the load capacity of it was mainly affected by skin friction. Also, it could be obtained the improvement effects of load capacity or ground's rigidity by the unitary behavior of ground and micropiles. In this study, The model tests were peformed on the dense sand where micropiles are set to the vertical direction. Strip footing was used in it. Steel bars of dia. 2 and 4㎜ were used in model tests of which the sand was attached on the surface, and the length of it was changed as 2B to 6B(where, B is width of strip footing) Through this process, the load capacity were analyzed from the test results in the relationship between load and displacement.

  • PDF

Biological Decolorization Characteristics of Dyeing Wastewater (염색폐수의 생물학적 색도제거 연구)

  • Kim, Mee-Kyung;Seo, Sang-Jun;Shin, Eung-Bai
    • Journal of Korean Society on Water Environment
    • /
    • v.22 no.2
    • /
    • pp.333-341
    • /
    • 2006
  • The concept for the decolorization in biological dye wastewater treatment systems is based on anaerobic treatment, for the reductive cleavage of the dyes' azo linkages, in combination with aerobic treatment, for the degradation of the products from azo dye cleavage, aromatic amines. Batch tests were conducted to examine the conditions and the factors affecting biological treatment of dye wastewater. From the tests, the removal efficiencies of organics and colors of dyeing wastewater were improved to $COD_{Cr}$ 27% and color 9% by injecting 10% of the domestic wastewater as a cosubstrate, and $COD_{Cr}$ 30%, color 22% with 30% injection of domestic wastewater. Therefore it was proved that decolorization efficiency is demonstrated with domestic wastewater as a cosubstrate. The analysis of aromatic amines in wastewater showed that decolorization was achieved by cometabolism while aromatic amines were produced by cleavage of azo bonds under anaerobic conditions and these products were removed in an aerobic tank subsequently.

Crabbing Test of a 3m Ferry Model (3m Ferry 모형선의 Crabbing 시험)

  • 신현경;이형락
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.41 no.1
    • /
    • pp.40-46
    • /
    • 2004
  • In this paper, one of the harbour manoeuvring tests is described. its goal is to investigate the so-called crabbing performance of ships. By crabbing is meant the ability of the vessel to move sideways with the use of her own manoeuvring devices like propellers, rudders, transverse thruster, etc. The crabbing model tests were carried out in the Ocean Engineering Wide Tank, University of Ulsan(UOU) to measure the transverse forces and yawing moments by the transverse thruster alone and the propeller-rudder arrangement in combination with the bow thruster. The comparison between UOU crabbing test results and data measured at one of foreign research institutes showed a little gap due to different rotating conditions of controllable pitch propellers.

Web-Based Language Test: Present and Future

  • Chong, Larry-Dwan
    • English Language & Literature Teaching
    • /
    • v.7 no.2
    • /
    • pp.17-36
    • /
    • 2002
  • This article begins by exploring recent developments in the use of the world wide webs in language testing about what a Web-based language test (WBT) is and how they are used in language testing. After a brief review of computer-based testing, WBTs are defined and categorized as low-tech or high tech. Since low-tech tests are the more feasible, they will constitute the focus of this paper. Next, item types for low-tech WBTs are described, and validation concerns that are specific to WBTs are discussed. After a brief overview of the combination of computer-adaptive and Web-based tests, the general advantages as well as design and implementation issues of WBTs are considered before examining the role that testing consequences play in deciding whether a WBT is an appropriate assessment instrument. It is argued that WBTs are most appropriate in low-stakes testing situations; but with proper supervision, they can also be used in medium-stakes situations although they are not generally recommended for high-stakes situations. Some possible ideas for future research are suggested.(169)

  • PDF

A Study on the Forming Limit Diagram Tests of Metal Sheets (금속 판재의 성형한계도 시험법에 관한 연구)

  • Jang, Uk-Kyeong;Jang, Yun-Ju;Kim, Hyung-Jong
    • Journal of Industrial Technology
    • /
    • v.30 no.A
    • /
    • pp.49-57
    • /
    • 2010
  • A forming limit diagram (FLD) defines the extent to which specific sheet material can be deformed by drawing, stretching or any combination of those two. To determine the forming limit curve (FLC) accurately, it is necessary to perform the tests under well-organized conditions. In this study, the influence of several geometric or process parameters such as the blank shape and dimensions, strain measuring equipments, test termination time, forming speed and lubricants on the FLC is investigated.

  • PDF