• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1084-1089
• /
• 2008

In this paper, a method for determining the boundary conditions which are derived from the random obstacles on the curves was presented. An algorism using this method is also developed. This determination method can be used for a good engineering tool in optimal curve design and an Radius-transition curve length(R-$L_t$) combination within the permissible zone can be improved without any increased costs.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.115-122
• /
• 2015

PURPOSES: Recently, many local governments have applied chicanes for traffic calming to ensure environment-friendly comfortable and safe roads. However, the geometry of a chicane is designed for speed reduction using a curved portion. This study aims to improve the road geometry conditions of chicanes for reducing carbon emissions and maintaining appropriate driving speeds by considering the relationship between road geometry and carbon emissions. METHODS: This study was conducted as follows. First, carbon emissions corresponding to changing acceleration of vehicles were studied. Second, vehicle acceleration caused by the relationship between the curve radius and the straight length was studied. Accordingly, desirable conditions of curve radius and length of the straight section for reducing carbon emissions were proposed. RESULTS: The existing literature on chicanes present the minimum value of stagger length and path angle in the primary variable condition. This study suggests the maximum values of the curve radius and length of straight section in the primary variable condition. Therefore, if a vehicle's speed at a chicane is 30 km/h, this study suggests a curve radius of up to 24 m. In addition, if the vehicle's speed is 24 km/h, this study suggests a length of straight section of up to 6.6 m. These are the geometric conditions for considering the control of acceleration to the vehicle's maximum speed. CONCLUSIONS: This paper proposes an application of geometric conditions to reduce carbon emissions and maintain appropriate speeds of vehicles through a combination of curve radius and length of straight section.

• 한국철도학회논문집
• /
• 제12권2호
• /
• pp.199-204
• /
• 2009

본 연구에서는 곡선부 선로선형의 최적설계를 위해 신선건설 및 기존선 개량시 지장물의 위치에 따른 곡선반경(R)-완화곡선장$(L_t)$의 적정 범위를 간단히 결정할 수 있는 기법을 제시하였다. 또한 이를 이용하여 간단히 계산할 수 있는 프로그램을 개발하였으며 실제 예를 통한 해석을 수행하여 경우별 곡선반경-완화곡선장의 경계조건에 대한 비교 분석을 수행하였다. 본 해석기법은 곡선상 지장물의 위치에 따른 최적 $R-L_t$를 산정할 수 있으며, 경계조건의 허용범위 내에서 $R-L_t$의 범위를 조정한다면, 향후 신선 및 개량설계시 지장물 이설에 따른 높은 비용의 절감이 가능하다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.365-373
• /
• 2011

In general, when train drives boost and traction mode, force of delivering to the track was difference between boost and traction driving mode. But, in korea, we've never performed that measure the track wheel load and lateral force while boost and traction driving. This study measured wheel load and lateral force using combination of 7200type locomotive and six freight car. And the train used single and automatic brake. The train drives boost and traction mode. In order to the difference radius of curve, we had measured at 3 point in the curve of turnout.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.163-169
• /
• 2001

The solution of two-dimensional deflection of circular wavy reinforcing fiber elastics was obtained for one end clamped boundary under concentrated load condition. The fiber was regarded as a linear elastic material. Wavy shape was described as a combination of half-circular arc smoothly connected each other with constant curvature of all the same magnitude and alternative sign. Also load direction was taken into account. As a result, the solution was expressed in terms of a series of elliptic integrals. These elliptic integrals had two different transformed parameters involved with load value and initial radius of curvature. While we found the exact solutions and expressed them in terms of elliptic integrals, the recursive ignition formulae about the displacement and arc length at each segment of circular section were obtained. Algorithm of determining unknown parameters was established and the profile curve of deflected beam was shown in comparison with initial shape.

• 한국측량학회지
• /
• 제21권4호
• /
• pp.347-353
• /
• 2003

최근 수치사진측량은 각종 첨단 산업분야에 그 응용이 증대되고 있으며, 많은 관심과 연구가 진행되고 있는 실정이다. 따라서 본 연구에서는 수치사진측량에 의한 도로평면선형정보체계 개발하였다 먼저 수치사진측량에서 취득된 자료들을 객체 지향적인 언어인 Delphi를 이용하여 도로평면선형정보(BC,EC,R,IP)를 구축하는 프로그램을 개발하였고, 개발된 프로그램은 영상자료를 많이 이용하여 기존보다 시각적인 효과를 극대화할 수 있었다. 그리고 개발한 도로평면선형정보의 제원 값은 동적GPS에 의해 취득된 자료를 최소제곱법의 원리를 이용한 평면선형추출 프로그램값과 비교하면, IP값은 약 X,Y방향으로 약 2m정도 정확도가 향상되었고, 곡선반경(R)은 약 2.5m정도의 정확도향상이 있었다.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.169-179
• /
• 2014

PURPOSES : This study is to conduct the research on the design principle for the driver's safety and comfort in installing consecutive curves of superhighway. METHODS : Superhighway does not currently exist in domestic area. Thus, this study is conducted by collecting driving behavior usage of 30 people who are involved in the members of the virtual driving simulation. By identifying the distribution characteristics of each scenario in ANOVA & Tukey Test, the distribution are categorized into three groups. RESULTS : In the case of Group A in Section 3 (R2 entry part), lane departure exceeds the safety standard, which means to be risky condition. And then in the case of Group B and C, the lane departure values applying theoretical formula was evenly distributed compared to the proven values. CONCLUSIONS : Based on the result, the continuous curve design principles at superhighway should follow three standards as follow. First, an additional linear part needs to be inserted between two curves. Second, what if inserting the linear part is difficult, it would be better to insert a curve more than 2,000m. Third, R1/R2 ratio should not be over two. This design primarily aims to the safety of the operator. Such road alignment also meets the expectations of drivers, thus, it may help drivers to be compatible and amenable while driving continuous curve in superhighway.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.621-630
• /
• 2018

In the note a comprehensive and optimal passive-active mode for describing the limit failure of circular shallow tunnel with settlement is put forward to predict the catastrophic stability during the geotechnical construction. Since the surrounding soil mass around tunnel roof is not homogeneous, with tools of variation calculus, several different curve functions which depict several failure shapes in different soil layers are obtained using virtual work formulae. By making reference to the simple-form of Power-law failure criteria based on numerous experiments, a numerical procedure with consideration of combination of upper bound theorem and stochastic medium theory is applied to the optimal analysis of shallow-buried tunnel failure. With help of functional catastrophe theory, this work presented a more accurate and optimal failure profile compared with previous work. Lastly the note discusses different effects of parameters in new yield rule and soil mechanical coefficients on failure mechanisms. The scope of failure block becomes smaller with increase of the parameter A and the range of failure soil mass tends to decrease with decrease of unit weight of the soil and tunnel radius, which verifies the geomechanics and practical case in engineering.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.207-212
• /
• 2009

In order to optimize the press formability of incremental sheet forming for complex shape (e.g human face), a combination of both CAM and FEM simulation, is implemented and evaluated from the histories of stress and strain value by means of finite element analysis. Here, the results, using ABAQUS/Explicit finite element code, are compared with fracture limit curve (FLC) in order to predict and optimize the press formability by changing parameters of tool radius and tool down-step according to the orthogonal array of Taguchi's method. Firstly, The CAM simulation is used to create cutter location data (CL data). This data are then calculated, modified and exported to the input file format required by ABAQUS through using MATLAB programming. The FEM results are implemented for negative incremental sheet forming and then investigate by experiment.