Kim, Bum-Keun;Lee, Jun-Soo;Cho, Yong-Jin;Park, Dong-June
Food Science and Biotechnology
/
제17권4호
/
pp.814-818
/
2008
Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.
The development of printable Hanji is regarded as an important work to create a new demand of Hanji in information-oriented era. Hanji has rougher surface, huger absorption of ink and lower optical properties and printabilities than common printing papers. Improving those shortcomings of Hanji is required to be printable Hanji. Sizing and calendering have known as a way to make properties of paper good. Accordingly, this research was performed to find out useful sizing agents for reforming its drawbacks. Four sizing agents (CMC, com starch, PVA, AKD) were used in this research. The optical properties and the printabilities of sized Hanji were tested. The obtained results were as follows. Based on concentration, each sizing agent was prepared. These were CMC(0.5, 1, $1.5\%$), corn starch(1, 2, $3\%$), PVA(1, 5, $10\%$), AKD(0.5, 0.1, $0.15\%$) respectively. After sizing, we performed calendering treatment with pressure of 0.5, $1\;kgf/cm^2$. All the sizing agents and calendering treatment improved the properties of Hanji to some extent. Particularly, com starch was good for gloss. In case of printability, $1\%$ AKD with $1\;kgf/cm^2$ was recommendable for typography ink density, $3\%$ com starch with $0.5\;kgf/cm^2$, inkjet ink density, $2\%$ com starch with $0.5\;kgf/cm^2$, inkjet ink girth. PVA and AKD without calendering were counter-effective agents for inkjet ink density. Printable Hanji is required to have not only better surface strength enough to appear non-picking, higher ink density and lower show-through than base paper but also the lowest ink girth in comparison with base paper. When referring to them, efficient sizing agents were regarded as $0.1\%$ AKD with $1\;kgf/cm^2$, calender pressure, for typography printing and $2\%$ com starch with $0.5\;kgf/cm^2$, calender pressure, for inkjet printing.
Han, Young-Joo;Park, Jong-Tae;Le, Quang Tri;Shim, Jae-Hoon;Nguyen, Van Dao;Kim, Yong-Ro;Park, Kwan-Hwa
Food Science and Biotechnology
/
제17권1호
/
pp.176-179
/
2008
Amylose contents and amylopectin chain architecture of sorghmn and waxy sorghum starches were determined and compared with those of other common cereal and tuber starches. Also, in vitro digestibility of sorghum starch was estimated using a novel methodology. The absolute amylose content of sorghum starch was similar to that of com and wheat starches. The side chain length distribution patterns for sorghum and waxy sorghum amylopectin were very similar to those of com and waxy com, respectively. The $k_{cat}/K_m$ values for sorghum and potato amylopectin did not show a significant difference. The kinetic parameters could be used as novel indicators for starch digestibility.
Moisture content of normal, waxy, and high amylose com starches was adjusted to 10-35%, and irradiated in a microwave oven. The effect of microwave irradiation on the crystalline structure of starch was measured by using a differential scanning calorimetry (DSC), and X-ray diffractometry. Pasting viscosity profile was also determined by using a rapid viscoanalyzer (RVA). For all the 3 types of starches tested, the rate of temperature increase by the microwave irradiation was faster and more rapidly reached the maximum temperature of the pressure bomb ($120^{\circ}C$) when the moisture content was higher. X-ray diffraction and DSC data revealed that the microwave irradiated starch underwent partial disruption of crystalline structure. RVA studies showed that the irradiation caused significant reductions in maximal viscosity and breakdown, whereas pasting temperature was increased. Overall trends revealed that the microwave irradiation on the starch containing limited moisture content (less than 35%) provided the effects similar to the heat moisture treatment. These effects became more significant when the moisture content was higher. Compared to waxy com starch, normal, and high amylose com starches appeared to be more susceptible to the microwave irradiation.
DSC를 이용하여 acom starch와 com starch 및 starch-saccharide-water system 의 겔화와 노화에 관한 열적 메카니즘을 알아보았다. 전분에 fructose와 maltose를 첨가한 starch-saccharide-water 계의 엔탈피를 측정한 결과, 당을 첨가하지 않은 경우의 엔탈피 값보다 컸으며 겔화 온도 역시 증가하였는데 이는 당이 물과 상호 작용하여 비결정성 영역에 흡수된 자유수가 감소하고 결정부분이 안정화되어 겔화가 일어나는 것을 지연시키기 때문이라고 생각되었다. 노화 엔탈피는 acorn starch 와 com starch에 대해 1일 ∼ 14일까지 저장시간에 따르는 변화를 관찰한 결과, 저장시간이 길어짐에 따라 엔탈피 값이 유의성 있게 증가하는 경향을 나타내었으며 이는 amylopectin 의 재결정화가 서서히 일어나기 때문으로 보였다. 또한 s-s-w system의 노화과정을 관찰한 결과, 저장시간이 길어짐에 따라 엔탈피 값이 증가하다가 7일이 지나면서부터는 일정해졌다. 이는 당이 amylopectin의 재결정화를 정지시켜서 노화를 지연시키기 때문으로 판단되었다. 당의 첨가가 노화에 미치는 영향은 fructose와 maltose 중에서 maltose의 노화지연 효과가 더 컸는데 이는 전분 겔 계를 안정시키는 junction zone의 수와 equatorial OH 수 및 활동적인 수화상태가 증가되는 요인을 maltose가 fructose보다 더 많이 갖고 있기 때문인 것으로 설명할 수 있었다.
옥수수빵(CON)과 그 구성 성분중 옥수수 전분을 Amylomaize Vll starch로 대체한 제품(AMZ)을 제조하였다 또한 AMZ의 구성 성분중 지방의 일부를 RS 로 대체한 제품(지방의 15%대체시 RSl5, 30%대체 RS30)을 제조하여 총 네 가지 제품에 있어서 품질 특성을 살펴본 결과는 다음과 같다. 1. Sievert and Pomeranz의 방법에 따라 열처리-냉각 과정을 3번 반복하여 제조한 시료에서 분리된 RS의 수율은 28.96%였다. 2.옥수수빵의 텍스쳐 특성 표현어를 Szczesniak의 방법에 따라 분류한 결과 가장 많이 언급된 항목은 시료의 수분 함량에 관련된 촉촉하다였으며 깨짐성 및 검성에 관련된 표현어로서 푸석푸석하다, 부슬부슬하다 및 입자 크기와 관련된 용어로서 부드럽다, 꺼끌꺼 끌하다, 모래같다 등이었다 3. 관능검사 결과 기공의 크기는 지방을 RS로 대체 한 경우 유의적으로 증가하였고 CON에 비해 AMZ, RSl5및 RS30의 견고성이 유의적으로 증가하고 탄성은 유의적으로 감소되는 것을 알 수 있었다. 4. Texture analyser를 이용하여 deformation 30%로 기계적 texture를 관찰한 결과 견고성은 시간이 경과함에 따라 유의적으로 차이가 없거나 증가하는 경향을 보였으며 응집성은 변화가 없거나 감소하였고 탄성은 CON이 AMZ, RSl5 및 RS3O과 비교하여 항상유의적으로 높은 값을 보여 관능검사 결과와 일치하였다. 5. 50% 변형시킨 경우에도 30% 변형시킨 경우와 비슷한 경향을 보였으며 특히 지방의 30%를 RS로 치환했을 경우 물성에 유의적인 변화를 가져온다는 것을 알 수 있었다.
첨가물질이 무처리 그리고 탈지옥수수와 녹두전분겔의 텍스쳐 특성에 미치는 영향을 알아 보기 위하여 실온에서 24시간과 72시간 저장하면서 관능적 기계적 특성을 조사하였다. 슈크로오스 지방산 에스테르, 셀룰로오스 유도체와 식용유를 전분량에 대해 0.5%첨가한 전분겔의 종합적인 맛은 24시간 저장한 전분겔의 경우에 응집성, 휘어짐성에서 높은 정의 상관관계를 보였고 72시간 저장한 전분겔에서는 탄성 , 응집성 ,색깔, 부드러움성 , 휘어짐성 , 견고성 , 투명도에서 정의상관관계를 보였다. 첨가물질의 유무에 관계없이 탈지에 의한 옥수수전분 겔의 물성적 특성이 크게 증가되었으며 첨가물질의 물성적 특성에 대한 영향은 모든 전분겔에서 낮게 나타났다. 종합적인 맛은 첨가물질을 넣은 전분겔이 다소 낮았고 24시간 저장한 전분겔은 응집성에서 72시간 저장한 전분겔은 탄성에서 가장 높은 상관관계를 보였다. 기계적 검사에 의한 텍스쳐 특성치도 관능검사 결과와 비슷한 경향을 보여 첨가물질의 종류에 따른 유의적인 차이는 보이지 않았다.
The optimal conditions for the production of branched dextrin from com starch (CSBD) using branching enzyme (BE) were established by investigating the degree of retrogradation of the gelatinized starch. The physicochemical properties of CSBD prepared using the established process were evaluated. It was found that physicochemical properties of com starch were greatly modified by BE treatment. CSBD had a higher dextrose-equivalent value and water solubility than the corresponding control. On the other hand, the viscosities in gelatinized solution and amylose contents of CSBD were lower than those of the control. A high-performance size-exclusion chromatography/multiangle laser light scattering/retractive index (HPSEC/MALLS/RI) system showed that the average molecular weight of CSBD was lower than that of the control. The pasting viscosities of CSBD were stable during the entire temperature cycle. In general, the BE treatment resulted in the retrogradation during storage being lower for CSBD than for the control.
The aim of this study was to produce resistant starch preparations from acid-modified com starches prepared at various hydrolysis levels (0.5-4.0 hr). Effect of autoclaving cycles on resistant starch (RS) formation was investigated. Molecular weight distribution, pasting and functional properties of acid-modified com starches were determined. For RS formation native and acid-modified starch samples were gelatinized and autoclaved (1 or 2 cycles). While native and acid-modified starches did not contain any RS, the levels increased to 9.0-13.5% as a result of storage at $95^{\circ}C$ after first autoclaving cycle. Second autoclaving cycle together with storage at $95^{\circ}C$ brought final RS contents of the samples incubated at 4 and $95^{\circ}C$ after the first cycle to comparable level. As acid modification level increased, the amount of high molecular weight fractions decreased, resulting in significant decreases in viscosities (p<0.05). The samples produced in this study had low emulsion stability and capacity values.
The biodegradability of vinyl acetate acrylate resin and com starch blend was studied by determination of the reduced sugars produced after enzymatic hydrolysis. The starch hydrolysis reaction by $\alpha-amylase$ was achieved within 5 minutes. Optimal ranges of temperature and pH for the starch hydrolysis by $\alpha-amylase$ were around $80^{\circ}C$ and 6.5-7.2, respectively. The biodegradability of the starch-filled acrylate films increased as the content of starch increased. The biodegradation of starch in the starch-filled acrylate film by $\alpha-amylase$ was about 48.6% of that of pure starch. This value of biodegradable starch-filled acrylate film gave a good result with enzymatic shortcut test. The surface morphologies of the starch-filled acrylate film after enzymatic hydrolysis were investigated by scanning electron microscopy (SEM).
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.