• 한국분말재료학회지
• /
• 제4권4호
• /
• pp.252-257
• /
• 1997

Cu-brazed layer between the sintered-cam(Fe-5Cr-lMo-0.5P-2.5C, wt%) and seamless steelpipe(0.25-0.35C, 0.3-1.0 Mn, bal Fe, wt%) in the camshaft shows a columnar structure of $\gamma$-phase growing from the steel pipe. Liquid phase sintered 60Fe-40Cu alloys are carburized to simulate the brazing process giving rise to the columnar growth. Liquid film migrations and columnar growth of $\gamma$-grains are observed in the carburized regions. The $\gamma$-grains grow in the same direction as the C-diffusion. Fe-solubility in the liquid of carburized region is higher than in the uncarburized by about 0.3 at%. The columnar growth is driven by the gradient of the supersaturated Fe-solute in the liquid between two adjacent $\gamma$-grains.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.187-192
• /
• 1998

일반적으로 재료의 응고조직은 주상정과 등축정 수지상 영역으로 이루어지는데 이것은 제품의 기계적, 물리적 성질과 밀접한 관계를 가지기 때문에 주상정-등축정 천이에 관한 많은 이론적 연구가 행하여지고 있다. 본 연구에서는 J.D. Hunt에 의하여 일방향응고시 주상정앞에서의 핵생성과 결정성장조건을 이용하여 구하여진 해석학적 주상정-등축정 조건식을 바탕으로 응고속도에 따라 변하는 분배계수와 액상선기울기를 적용하여 수정된 조건식을 구하였다. 그리고 Al-Cu합금에 대하여 응고변수인 핵생성수, 핵생성온도, 합금의 조성, 응고속도 온도기울기에 따른 천이현상의 변화를 조사하였다.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.242-245
• /
• 2009

종자결정을 사용하지 않고 AlN 결정을 승화법으로 성장하였으며, 결정이 성장되는 양상을 고찰하였다. AlN 결정으로 성장된 상은 다결정 상이었으며, 약 $60\sim160\;{\mu}m$의 크기를 가졌으며, $0.2\sim0.5\;{\mu}m/hr$의 성장 속도로 성장되었다. 성장된 결정구조는 AlN 결정의 결정 구조가 반영된 육방정계의 결정상으로 성장되었음을 관찰하였으며, 주상 구조(columnar structure)로 성장된 후 횡적 성장(lateral growth)하는 양상을 보이면서 대형화됨을 알 수 있었다. 성장된 결정의 표면에서는 다량의 pinhole이 관찰되었으며, 광학현미경과 SEM을 이용하여 성장 morphology의 변화과정을 고찰하였다.

• Journal of Magnetics
• /
• 제7권3호
• /
• pp.115-125
• /
• 2002

We proposed a novel method to evaluate the magnetic properties of the initial layer and the columnar structure separately for CoCr-based perpendicular recording media. We show that the thickness of the initial layer and the intrinsic magnetocrystalline anisotropy of columnar structure can be quantitatively evaluated using the plotted product of perpendicular anisotropy to magnetic film thickness versus magnetic film thickness ($K_{u{\bot}}^{ex{p.}}$ $\times$ d$_{mag.}$ vs. d$_{mag.}$ plot). Based on the analyses, it is found that: (1) compared with CoCrPtTa media, CoCrPtB media have relatively thin initial layer, and have fine grains with homogeneous columnar structure with c-plane crystallographic orientation; (2) CoCrPtB media can be grown epitaxially on Ru or CoCr/C intermediate layer, and as the result, the magnetic properties of the media within thin thickness region of d$_{mag.}$ $\leq$ 20 nm is significantly improved; (3) the key issue of material investigation for CoCr-based perpendicular recording media will be focused on how to fabricate c-plane-oriented columnar grains well isolated with nonmagnetic substance in epitaxial-growth media, while maintaining the thermal stability of the media.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.275-280
• /
• 1997

We have investigated the deposition characteristics of (Ni0.8Fe0.2)20Ag80 thin films as a function of chamber pressure and nitrogen flow rate with scanning electron microscopy(SEM), atomic force microscopy(AFM), XRD and $\alpha$-step. The deposition rate of these film is decreased with increasing the chamber pressure and the nitrogen flow rate. With raising the chamber pressure, the growth mode of thin film is changed from island growth to columnar one, which is probably due to energy of atom. Contrary, the nitrogen flow rate is raised, growth mode is changed from columnar to island one. According to the XRD patterns, the preferred orientation is inhibited as the nitrogen flow rate is kept above 10 sccm, but that is nearly independent on the chamber pressure. When the chamber pressure decrease or the nitrogen flow rate increase, phase separation into permoally and silver is occured.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.127-127
• /
• 2009

The most important part of the fabrication solar cells is the anti-reflection coating when excludes the kinds of silicon substrates (crystalline, polycrystalline, or amorphous), patterns and materials of electrodes. Anti-reflection coatings reduce the reflection of sunlight and at last increase the intensity of radiation to inside of solar cells. So, we can obtain increase of solar cell efficiency about 10% using anti-reflection coating. There are many kinds of anti-reflection film for solar cell, such as SiN, $SiO_2$, a-Si, and so on. And, they have two functions, anti-reflection and passivation. However such materials could not perfectly prevent reflection. So, in this work, we investigated the anti-reflection coating with the columnar structure ZnO thin film. We synthesized columnar structure ZnO film on glass substrates. The ZnO films were synthesized using a RF magnetron sputtering system with a pure (99.95%) ZnO target at room temperature. The anti-reflection coating layer was sputtered by argon and oxygen gases. The angle of target and substrate measures 0, 20, 40, 60 degrees, the working pressure 10 mtorr and the 250 W of RF power during 40 minutes. The confirm the growth mechanism of ZnO on columnar structure, the anti-reflection coating layer was observed by field emission scanning electron microscopy (FE-SEM). The optical trends were observed by UV-vis and Elleso meter.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1083-1091
• /
• 1988

본 연구에서는 위의 두번째 연구동향과 맥락을 같이하는 것으로서 스테인리스 강(SUS304)에 대한 진공브레이징 연구 및 탄소강의 진공 브레이징에 대한 연구결과들 을 토대로 하여 SUS304와 탄소강과의 진공브레이징 현상을 연구하였는데 특히 모재의 탄소함유량, 브레이징시간 및 접합부 틈새(joint clearance)등에 따라 접합부에 나타 나는 여러 금속학적 현상의 규명 및 접합강도(joint strength)에 대해 변수들이 미치 는 영향을 연구 하였다.

• 대한수의학회지
• /
• 제24권1호
• /
• pp.8-16
• /
• 1984

The work was conducted with tole purpose of investigation on the development pattern of epididymis in accordance with the growth of meat-type cockerels. 1. Histological features of various ductules in epididymis of the cockerel on the age of weeks were as follow: within 10 weeks after hatching rete testis and connecting ductules were well developed but efferent ductules were observed in immature form. During 10th to 20th week, the lining epithelium of various ductules in epididymis was in the developing stage near to the mature form. From 21th week, various ductules were abruptly matured. Lumen of rete testis was lined by simple squamous or simple columnar epithelial cells and that of efferent ductules, having many folds and being larger than any others, were lined by ciliated pseudostratified columnar epithelium with ciliated columnar cells, clear cells and basal cells were noted. Luminal epithelium of connecting ductules was composed of ciliated low pseudostratified columnar epithelial cells, ciliated columnar cells, clear cells and basal cells. The luminal surface of epididymal ducts was pseudostratified columnar epithelium and which was composed of high columnar cells and basal cells. 2. In the India ink absorption test, India ink granules were noted above the nucleus of some cells in the efferent ductules and the connecting ductules at 7 hours after administration of India ink to the mature epididymis, but not absorbed in the other ductules. The granules reactive to acid phosphatase were most abundant in some epithelial cells of efferent ductules and connecting ductules, especially above the nucleus of cells. The granules reactive to alkaline phosphatase were noted on the luminal border of efferent ductules. The granules reactive to PAS were scattered in the epithelial cells of efferent ductules and connecting ductules.

• 한국주조공학회지
• /
• 제14권6호
• /
• pp.508-513
• /
• 1994

For Pb-20wt%Cu alloys, severe macrosegregation due to density difference of the resulting phases in normal directional solidification has been minimized and a uniformly aligned dendritic structure has been produced by axially rotating the sample of 5mm diameter in conjunction with horizontal directional solidification. Under the constant growth velocity of $20{\mu}m/sec$, increasing the rotation rate from 0.18 to 12rpm results in a transition from an aligned columnar to an equiaxed Cu-dendritic structure. With a constant rotation rate of 0.18rpm, increasing the growth velocity from 10 to $50{\mu}m/sec$ also has promoted a transition from columnar to equiaxed structure.

• Journal of information and communication convergence engineering
• /
• 제3권3호
• /
• pp.131-136
• /
• 2005

The effects of the deposition temperature on the growth characteristics of the ZnO films were studied for film bulk acoustic wave resonator (FBAR) device applications. All films were deposited using a radio frequency (RF) magnetron sputtering technique. It was found that the growth characteristics of the ZnO films have a strong dependence on the deposition temperature from 25 to $350^{\circ}C$. The ZnO films deposited below $200^{\circ}C$ exhibited reasonably good columnar grain structures with a highly preferred c-axis orientation while those above 200°C showed very poor columnar grain structures with a mixed-axis orientation. This study seems very useful for the future FBAR device applications.