• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.411-412
• /
• 2012

대부분의 상용 LED는 사파이어기판에 성장된 GaN를 기반으로 사용한다. GaN는 $1,000^{\circ}C$ 이상의 높은 온도에서 성장이 이루어지는데 이 경우 GaN과 사파이어 기판과의 높은 열팽창 계수로 인하여 compressive stress를 받게 된다. 이 compressive stress로 인하여 성장된 GaN wafer에 bowing이 일어나게 되고 이는 기판의 대면적화에 커다란 문제로 작용한다. 이런 문제들을 해결하기 위해 여러 방법이 고안되고 있지만 [1,2], 근본적으로 wafer bowing 문제의 해결은 이루어지고 있지 않다. 한편, 일반적으로 박막을 성장할 때 columnar structure를 가지는 박막이 coalescence되면 박막에 tensile stress가 걸린다는 사실이 알려져 있으며 [3], GaN를 저온에서 성장할 경우 columnar structure를 갖는다는 사실이 보고되었다 [4]. 본 연구에서는 이런columnar structure를 갖는 GaN을 이용하여 wafer bowing 문제가 해결된 GaN 박막 성장을 연구하였다. 본 실험에서는, c-plane 사파이어에 유기금속화학증착법(MOCVD)을 이용하여 nano-columnar structure를 갖는 저온 GaN layer을 성장하였다. 그 후 columnar structure를 유지하면서 $1,040^{\circ}C$까지 annealing한 후 고온에서 flat 한 GaN 박막을 nano-columnar structure GaN layer위에 성장 하였다. 우선 저온 GaN layer가 nano-columnar structure를 갖고, 고온에서도 nano-columnar structure가 유지되는 것을 scanning electron microscopy (SEM)과 transmission electron microcopy (TEM)을 통해 확인하였다. 또한 이런 columnar structure 위에 고온에서 성장시킨 flat한 GaN 박막이 성장된 것을 관찰할 수 있었다. 성장된 GaN박막의 wafer bowing 정도를 측정한 결과, columnar structure를 갖고 있는 고온 GaN 박막이 일반적인 GaN에 비해 확연하게 wafer bowing이 감소된 것을 확인할 수 있었다. Columnar structure가 coalescence가 되면서 생기는 tensile stress가 GaN박막의 성장시 발생하는 compressive stress를 compensation하여 wafer bowing이 줄어든 것으로 보인다. 본 발표에서는 이 구조에 대한 구조 및 stress 효과에 대해서 논의할 예정이다.

• Journal of Korea Foundry Society
• /
• v.20 no.3
• /
• pp.197-207
• /
• 2000

Al-Si alloys were solidified in a rotating cylindrical mold by a vertical centrifugal casting process. Under a certain casting condition, there are four distinct zones such as the chill zone, the primary fine columnar zone, the equiaxed zone, and the secondary coarse columnar zone from the mold wall. The columnar-equiaxed transition (CET) and the equiaxed-columnar transition (ECT) were measured as functions of solute content, flow rate (mold velocity), pouring temperature and mold temperature. Within the critical value of solute content, as the flow rate increases, the columnar-equiaxed transition were found, but not the equiaxed-columnar transition. The aspect ratio of the primary columnar zone was more affected by the solute content than the flow rate. However the aspect ratio of the equiaxed zone was more affected by the flow rate than the solute content. The aspect ratio of the secondary columnar zone was affected by both the flow rate and the solute content.

• Journal of the Korean earth science society
• /
• v.37 no.6
• /
• pp.332-345
• /
• 2016

The columnar joints in Goheung are developed in three places of Yuju-san area, Palyeong-san and Yongbawi area. Vertical and fan-shaped columnar joints which have maximum width 100 m and maximum heigh 50 m are developed in the Yuju-san area Columnar joints are developed next to the road near the the Yuju-san and along the coast of Jijuk-do. Thick columnar joints of maximum width 1m are developed in the Paryeong-san area. Horizontal columnar joints of maximum width 50 cm at length of polygon side are developed on dyke in the Yongbawi area. The columnar joints show high rate of rectangles and pentagons in the number of polygons. The length of polygon side of columnar joints in study area ranges from 10 to 100 cm, and 20 cm among the range appears in high frequency. Columnar joints are developed vertically to the ground from the cooling surface in Yuju-san and Palyeong-san area. Columnar joints in Yongbawi area are developed vertically to the contact of country rocks. As a result, the columnar joints began cooling from the country rock contact. And columnar joints are developed vertically to contact surface. The rocks in columnar joints is rhyolitic welded tuff in Yuju-san and Palyeong-san area, dacite in Yongbawi area. In the acid volcanic rocks flow structure well developed. The white phenocryst mineral about 2 mm size by eye, is usually feldspar, and includes some quartz. The rate of $SiO_2$ is 70wt.% or more. It is the last stage of differentiation to calc-alkaline series. The columnar joints of the Yuju-san area are expected to be distributed along a band that extends to about 1km east of the stone pit.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.127-141
• /
• 2023

The purpose of this study is to develop a textile pattern design using the columnar joints motif and a Tyvek fashion clutch bags using it. As a research method, first, through a literature review, columnar joint and Tyvek are understood, and design cases were considered. Second, through a survey, the purchase perception and design preference of columnar joints cultural products were analyzed. Third, based on the results of the survey on color and print, the pattern design for each type of columnar joint were developed, and the uv-printed Tyvek clutch bag was developed. The results of this study are as follows. First, the reason why the public was not attracted to the purchase of cultural products was dissatisfaction with practicality, price adequacy, and aesthetics. Therefore, it was analyzed that quality, practicality, price, carry-on storage, collection value, and casualness, as well as aesthetic design were important factors for purchasing factors pursued by consumers. Second, consumers preferred small goods the most for cultural products, and they pursued the use of colorful and contrasting colors, modern and geometric patterns, and eco-friendly materials, such as Tyvek. Third, columnar joint can be classified into three cross sections and four arrangements. The design unit of the columnar joint could be expressed as a hexagonal column, and 12 different pattern designs could be developed according to the cross sections and arrangements type. In addition, it was found that it was easy to produce fashion products suitable for the sensibility of modern people by utilizing Tyvek materials.

• Journal of Powder Materials
• /
• v.4 no.4
• /
• pp.252-257
• /
• 1997

Cu-brazed layer between the sintered-cam(Fe-5Cr-lMo-0.5P-2.5C, wt%) and seamless steelpipe(0.25-0.35C, 0.3-1.0 Mn, bal Fe, wt%) in the camshaft shows a columnar structure of $\gamma$-phase growing from the steel pipe. Liquid phase sintered 60Fe-40Cu alloys are carburized to simulate the brazing process giving rise to the columnar growth. Liquid film migrations and columnar growth of $\gamma$-grains are observed in the carburized regions. The $\gamma$-grains grow in the same direction as the C-diffusion. Fe-solubility in the liquid of carburized region is higher than in the uncarburized by about 0.3 at%. The columnar growth is driven by the gradient of the supersaturated Fe-solute in the liquid between two adjacent $\gamma$-grains.

• Korean Journal of Veterinary Research
• /
• v.24 no.1
• /
• pp.8-16
• /
• 1984

The work was conducted with tole purpose of investigation on the development pattern of epididymis in accordance with the growth of meat-type cockerels. 1. Histological features of various ductules in epididymis of the cockerel on the age of weeks were as follow: within 10 weeks after hatching rete testis and connecting ductules were well developed but efferent ductules were observed in immature form. During 10th to 20th week, the lining epithelium of various ductules in epididymis was in the developing stage near to the mature form. From 21th week, various ductules were abruptly matured. Lumen of rete testis was lined by simple squamous or simple columnar epithelial cells and that of efferent ductules, having many folds and being larger than any others, were lined by ciliated pseudostratified columnar epithelium with ciliated columnar cells, clear cells and basal cells were noted. Luminal epithelium of connecting ductules was composed of ciliated low pseudostratified columnar epithelial cells, ciliated columnar cells, clear cells and basal cells. The luminal surface of epididymal ducts was pseudostratified columnar epithelium and which was composed of high columnar cells and basal cells. 2. In the India ink absorption test, India ink granules were noted above the nucleus of some cells in the efferent ductules and the connecting ductules at 7 hours after administration of India ink to the mature epididymis, but not absorbed in the other ductules. The granules reactive to acid phosphatase were most abundant in some epithelial cells of efferent ductules and connecting ductules, especially above the nucleus of cells. The granules reactive to alkaline phosphatase were noted on the luminal border of efferent ductules. The granules reactive to PAS were scattered in the epithelial cells of efferent ductules and connecting ductules.

• Korean Journal of Veterinary Research
• /
• v.39 no.3
• /
• pp.425-434
• /
• 1999

The morphological studies on the cecal development in the 60-, 90-, and 120-day-old fetuses and the newborns of Korean native goats were investigated by scanning and transmission electron microscopy. The results were summarized as follows ; Scanning electron microscopic studies : 1. In the 60-day-old fetuses, fold-like shapes protrusion on the cecal mucosa surface appeared. In the 90-day-old fetuses, the cecal villi appeared to be columnar shapes. In the 120-day-old fetuses, the cecal villi showed various tongue-like or columnar shapes. In the newborns, only the rudimental trace of the villi and the intestinal glands were observed. Transmission electron microscopic studies : 2. In the 60-day-old fetuses, the cecal epithelia were simple columnar in some areas and stratified columnar in others, and the epithelial cells contained nuclei, nucleoli, ER, mitochondria, Golgi complexes, zonula occludens, desmosomes, digitiform intercellular junctions, and large masses of the glycogen granules. 3. In the 90-day-old fetuses, the cecal epithelia were simple columnar in some area and stratified columnar in other. The microvilli of the cecal epithelia became much larger and longer than those in the 60-day-old fetuses, and intercellular junctions were developed, and increased numbers of ER, mitochondria, Golgi complexes were observed and the goblet cells contained a lot of the secretory granules. 4. In the 120-day-old fetuses, the cecal epithelia were only simple columnar in all areas. Microvilli and cytoplasmic organelles were well developed and the irregular annular nuclei were observed. 5. In the newborns, the cecal epithelia were covered with extensive microvilli, and the goblet cells with secretory granules were protruded into the lumen. And some goblet cells secreted the secretory granules into the lumen.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.45-59
• /
• 2014

This study has been designed to collate distribution, morphology, petrology of columnar joint in South Korea. Reported columnar joint areas in South Korea are 68, until the present time. These can be divided into five group by geography and volcanic activity. 1) The 16 columnar joint areas are distributed in Hantangang region. The 15 areas in this region are composed of basaltic lava in the Quaternary period, and the other 1 area is composed of volcanic rocks in the Cretaceous period. 2) The 18 columnar joint areas are distributed in Jeju island. Most of them are composed of basaltic lava(alkali basalt and Hawaiite), and the Sanbangsan and Baegrokdam area are composed of trachyte in the Quaternary period. Colonnade, entablature and chisel mark of the columnar joint are typically occur in basaltic lava. 3) The 5 columnar joint areas are distributed into the Ulleung island and Dokdo including Guksubawi. These are consisted of relatively well-formed trachyte columns in the Quaternary period. 4) The 8 columnar joint areas are distributed into the Pohang, Gyeongju and Ulsan region and consist of the Tertiary period volcanic rock. It's shape are dome, radial, horizontal and vertical. The 4 columnar joint areas are reported in the Pyeongtaek and Asan city of Chungcheongnamdo and Gosung of Gangwondo. All of them are the Tertiary period basalt. 5) The 15 columnar joint areas are distributed into the west and south coast region. Those are consisted of various rock type(from basalt to dacite), various occurrences(lava flow to welded tuff), and various diameters(20 cm to several meters). The columnar joint of Mudeung mountain and Juwang mountain are welded tuff in the Cretaceous period. The columnar joint is distributed over a wide area in South Korea, 5 in Gangwondo, 13 in Gyeonggido, 2 in Chungnam, 14 in Gyeongbuk, 1 in Jeonbuk, 10 in Jeonnam, 5 in Gyeongnam, and 18 in Jeju. The columnar joints in South Korea can be arranged in order of formative period, 18 in the Cretaceous period, 12 in the Tertiary period, and 38 in the Quaternary period. By magma series, 36 are belong to alkaline series and 32 are belong to sub-alkaline series.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.187-192
• /
• 1998

Generally the solidified microstructures of materials consist of the columnar and equiaxed dendritic regions, and many theoretical studies about columnar-to-equiaxed transition have been done because that is closely related to the mechanical and physical properties of products. In this study, the modified equation based on the Hunt's analytical columnar-to-equiaxed transition condition which was derived from heterogeneous nucleation and grain growth in front of the columnar dendrite tip under directional solidification, was obtained applying the growth-velocity-dependent distribution coefficient and liquidus slope to Hunt's. The effects of the number of nucleation sites, nucleation temperature, alloy composition, growth velocity and liquid temperature gradient on the transition for Al-Cu alloys have been investigated.

• The Korean Journal of Cytopathology
• /
• v.10 no.2
• /
• pp.179-184
• /
• 1999

The columnar cell variant of papillary carcinoma is a rare tumor of the thyroid, associated with aggressive behavior, early metastasis, and a rapidly fatal course. We present the fine needle aspiration cytologic(FNAC) findings of columnar ceil variant of papillary carcinoma with cytohistologic correlation. In the smears, the tumor fragments showed mainly papillary pattern and a few scattered individual cells were present around the papillary fragments. The tumor cells were columnar or cuboidal and exhibited pseudostratification of the nuclei. The nuclei were oval to elongated with finely stippled chromatin and inconspicous nucleoli. Neither nuclear grooves nor intracytoplasmic inclusion was found. The FNAC diagnosis was consistent with papillary carcinoma. Total thyroidectomy was done and the histologic finding of the mass showed a predominantly papillary and focal solid proliferation of columar cells with marked nuclear pseudostratification. The unique histopathologic features and highly aggressive nature of columnar ceil variant of papillary carcinoma require that this variant should be differeniated from common papillary carcinoma of the thyroid.