• 한국공간구조학회논문집
• /
• 제4권1호
• /
• pp.87-95
• /
• 2004

본 논문은 화재시 온도상승에 따른 H-형강 기둥의 내력에 관한 연구이다. 주요 매개변수는 온도, 세장비와 하중비이다. 온도 상승시 강재의 물리적 특성은 EC3 Part1.2에 따랐다. 온도상승에 따른 국부좌굴의 임계온도는 재료의 항복강도와 판폭두께비가 클수록 더 낮아진다. 균등한 열을 받는 철골 기둥의 내혁 평가는 LRFD에 따른 축력과 강축 및 약축 모멘트에 대하여 고려하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권4호
• /
• pp.307-312
• /
• 2016

The present study reported of the use of special shaped blade to reduce the difference in pressure across the Wells turbine for wave energy conversion. The blade profile was composed of NACA0020 airfoils and trailing edge was notched like chevron. Experiments were performed investigating the influence of trailing edge shape on the turbine performance. Four notch depths were used to investigate the effect of depth of cut on the turbine performance. As results, by placing a notch-cut at the trailing edge of the blade, it was possible to reduce the pressure difference across the turbine without lowering the efficiency. In addition, the pressure difference substantially reduced at a constant rate with the increase of the cut ratio.

• 헤리티지:역사와 과학
• /
• 제33권
• /
• pp.256-273
• /
• 2000

This thesis attempts to investigate the design of the bracket sets(eave-supporters) of Dapo-style architecture(multiple-bracket architecture) in order to discover the change and the characteristic of the Yon-Hwa-Hyong bracket sets. The external shape of eave-supporters has been evolved as following order: Kyo-Du-Hyong, Soe-Seo-Hyong, Cho-Gak-Soe-Seo-Hyong, and Yon-Hwa-Soe-Seo-Hyong. The internal shape has been developed as following order: Kyo-Du-Hyong. Cho-Gak-Hyong and Yon-Hwa-Hyong. Kyo-Du-Hyong represents the 17th century style and Yon-Hwa-Hyong has been used since the mid 18th century. Cho-Gak-Hyong signifies the transformation in the structural and designing role of column section and middle section and there appears a unified aspect in Yon-Hwa-Hyong. The transformation from Kyo-Du-Hyong towards Yon-Hwa-Hyong suggests that this is an intention of symbolizing the Buddhist teachings inside and outside of the eave-supporters. The purpose of this change establishes the Buddhist land.

• Ocean Systems Engineering
• /
• 제14권3호
• /
• pp.261-276
• /
• 2024

Numerical investigation was carried out to analyze the hydrodynamic response of 4-column semi-submersible floaters, incorporating variations such as stepping and alterations in the shape/geometry of columns and pontoons, as well as tilting of main columns. Utilizing Ansys-AQWA, a hydrodynamic software based on panel method, simulations were executed for these scenarios. The simulations yielded insights into responses, excitation forces/moments, and pressure on the structure, facilitating a comparison between the models through a parametric study. It was observed that stepping of pontoons and tilting of columns led to reduced responses, forces, and pressures, reaching balance through appropriate stepping and tilting. Additionally, altering the geometry of columns and pontoons indicated the potential benefits of employing elliptical pontoons and pentagonal columns for enhanced response control.

• 한국가구학회지
• /
• 제21권4호
• /
• pp.273-283
• /
• 2010

Structural larger timber have some weak points as like much longer drying time at lower MC(15%), a considerable check developing and the difficulty for the chemicals injection, so it is necessary to develop lighter structural size member for using the new Hanok, heavy timber construction, living necessaries, furniture and industrial goods. The developed skin timber can be a good raw material for those uses. Skin timber is a hollowed timber which be bored out of its considerable cross-sectional area. The intention of this study was the evaluation of compressive capacity of skin timber. Specially, skin timbers which have more than 200mm in sizes were used to analyze the compressive capacity. From the results of this study, the following conclusions have been made: 1. Though considerable inner parts were bored out, both pine skin timber and larch skin timber showed a good compressive capacity to that of non-bored solid timber. 2. According to ASTM, pine skin timber showed various failure types, but Splitting type, Brooming and end rolling type were main failure types for the larch skin timber. 3. Pine skin timber didn't show the significance between cylindrical shape and rectangular shape, but larch skin timber showed the significance between two shapes. Therefore, for the larch skin timber, cylindrical shape and rectangular shape should be used as a column uses and beam uses respectively. 4. Pine skin timber and larch skin timber didn't show the significance on the compressive capacity. There is not much difference of compressive capacity between them, so it can be possible to select on the user convenience.

• 콘크리트학회논문집
• /
• 제19권4호
• /
• pp.411-420
• /
• 2007

본 연구는 반복 수평 하중을 받는 외부 보-기둥 접합부에서 작은 헤드를 사용한 headed bar의 사용성을 검증하기 위해 $90^{\circ}$ 표준갈고리로 정착한 실험체와 headed bar로 정착한 접합부 실험체를 제작하여 각각의 실험 결과를 비교하였다. 또한, headed bar 정착 성능에 영향을 주는 헤드 단면적, 단조 및 반복 가력 여부, 헤드와 보강근의 용접 여부등의 headed bar 인발 성능에 관한 영향을 구명하기 위한 인발실험을 병행하였다. 인발실험의 결과, headed bar의 인발강도는 헤드 면적 증가에 따라 증가하였고, 헤드와 보강근의 용접 유무, 가력 조건 (단조하중 및 반복하중)은 실험 결과에 큰 영향을 미치지 않는 것으로 나타났다. 외부 보-기둥 접합부 실험의 결과, $90^{\circ}$ 표준갈고리로 정착한 실험체와 headed bar로 정착한 실험체가 초기 균열, 균열의 발생 등 모두 거의 비슷한 양상이었으나, 최종 파괴 시에는 headed bar로 정착된 실험체가 $90^{\circ}$ 표준갈고리로 정착된 실험체에 비해 최대 강도 도달 이후 연성 거동, 연성비 및 변형 성능, 에너지소산 면적 등에서 우수한 거동을 보여주었다. 따라서 ACI 352 위원회의 설계지침을 따라서 제작된 접합부 상세와 동일한 조건으로 표준갈고리 대신 상대적으로 작은 headed bar를 사용할 수 있을 것으로 판단된다.

• 대한수의학회지
• /
• 제36권2호
• /
• pp.289-296
• /
• 1996

A case of schistosomus reflexes in Korean native female calf was observed macroscopically and radiographically. The results were summarized as follows. 1. The abdominal visceral organs were exposed. 2. The vertebral column bent laterally to the left, and the sacrum approached to the cranium by reflected caudal lumber vertebrae, presenting S-shaped lateral twisting of the vertebrae. 3. The right ribs reflected laterally and dorso-cranially from the 7th rib to 13th rib. The left ribs bent caudally from 8th rib to 13th rib. 4. The length of rudimentary 6th right rib was one half of normal size and the 7th right rib was one third. 5. The sternum was bifid split from the fourth sternebra through the xyphoid cartilage. 6. The diaphragm was intact and thoracic cavity was reduced in size. The lung and heart severely deformed in shape and size. 7. The liver markedly deformed in shape and thickness. 8. The pelvic cavity was reduced in size by compression laterally to the left. 9. The uterus horn, ovary, urinary bladder, and urethra were severely deformed in the shape and position.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.175-187
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like Exploration and drilling vessels, Production barges, Cable-laying vessels, Rock dumping vessels, Research and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modelled and tested in the wave basin. The pretensions of the lines are varied by altering the touchdown points and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs calculated for various situations provide better insight to the designer.

• Ocean Systems Engineering
• /
• 제3권2호
• /
• pp.137-147
• /
• 2013

Moonpools are vertical wells in a floating body used onboard many types of vessels like cable-laying vessels and offshore support vessels. Moonpool gives passage to underwater activities for different types of ships as per their mission requirements. It is observed that inside a moonpool considerable relative motions may occur, depending on shape, depth of the moonpool and on the frequency range of the waves to which the ship is exposed. The vessel responses are entirely different in zero and non-zero Froude number. Former situation is paid attention in this study as the mission requirement of the platform is to be in the particular location for long period of operation. It is well known that there are two modes of responses depending on the shape of the moonpool viz., piston mode for square shape and sloshing mode for rectangular shapes with different aspect ratios of opening like 1:1.5 and 1:2 ratios. Circular shaped moonpool is also tested for measuring the responses. The vessel moored using heavy lines are modeled and tested in the wave basin. The moored lines are provided with pre-tension and the dynamic tensions on the lines are measured. The different modes of oscillations of water column are measured using wave gauge and the vessel response at a particular situation is determined. RAOs determined for various situations provide better insight to the designer. The experiments done in the wave basin may also be compared with a software package meant for handling moored floating bodies.

• 한국지진공학회논문집
• /
• 제8권1호
• /
• pp.77-86
• /
• 2004

본 논문은 강교좌장치를 가지고 있는 연속 강교량을 지진으로부터 보호하기 위해서 형상기억합금을 이용한 장치를 제안했다. 예로 사용하고 있는 연속 강교량은 고정단을 가진 교각에 지진하중이 집중하고 상당히 큰 상부구조의 중량으로 인하여 교각에 손상을 입기 쉽고 상판의 교대에 대한 충돌로 교대의 수동변위가 크게 나타날 수 있다. 본 연구에서는 두 가지 종류의 restrainer-damper가 제안되었으며 지진해석을 통해서 효과를 검증하였다. 또한 미주에서 일반적으로 사용되고 있는 강재 케이블의 restraoiner와 성능을 비교하였다.