• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4213-4227
• /
• 2023

Computer Automated Radioactive Particle Tracking (CARPT) technique has been successfully utilized to measure the velocity profiles and mixing parameters in different multiphase flow systems where a single radioactive tracer is used to track the tagged phase. However, many industrial processes use a wide range of particles with different physical properties where solid particles could vary in size, shape and density. For application in such systems, the capability of current single tracer CARPT can be advanced to track more than one particle simultaneously. Tracking multiple particles will thus enable to track the motion of particles of different size shape and density, determine segregation of particles and probing particle interactions. In this work, a newly developed Multiple Radioactive Particle Tracking technique (M-RPT) used to track two different radioactive tracers is demonstrated. The M-RPT electronics was developed that can differentiate between gamma counts obtained from the different radioactive tracers on the basis of their gamma energy peak. The M-RPT technique was validated by tracking two stationary and moving particles (Sc-46 and Co-60) simultaneously. Finally, M-RPT was successfully implemented to track two phases, solid and liquid, simultaneously in three phase slurry bubble column reactors.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.41-52
• /
• 1999

다짐 전.후의 지반개량정도와 개량깊이를 평가하기 위하여 일반적으로 SPT와 CPT가 많이 사용된다. 두 방법 모두 일점시험으로서 대규모 현장에서 사용될 경우 매우 많은 시간을 필요로 하며, 지반종류와 실험 숙련도에 따라 시험결과가 영향을 받는다. 본 논문에서는 표면파시험과 공진주시험결과를 결합하여 다짐 전.후의 지반개량정도와 개량깊이를 평가하는 방법을 제안하였다. 표면파 시험은 다짐 전.후의 지반의 전단파속도주상도를 회득하는데 사용되며, 공진주시험은 단일상관관계를 가지는 정규다짐 화된 전단파속도와 밀도와의 관계를 결정하는데 사용된다. 마지막으로 제안된 방법의 타당성을 검증하기 위하여 영종도(인천)국제공항 건설현장에서 제안된 평가절차에 따라 표면파시험결과와 공진주시험결과로부터 깊이별 개량정도를 추정하였으며, 이로부터 제안된 방법의 현장적용 가능성을 확인할 수 있었다.

• 에너지공학
• /
• 제21권1호
• /
• pp.43-46
• /
• 2012

A fluidized bed drying approach was utilized to the synthesis of water glass based silica aerogel powders. The effects of the fluidized bed drying conditions such as the superficial velocity and temperature of hot air and bead size as well as bead/wet-gel ratio, on the physical properties such as tapping density and productivity of the aerogel powders were systematically investigated. The experimental results showed that the amount of beads mixed with wet-gels in the fluidized bed column has the most profound impact on the fluidization efficiency, greatly enhancing the yield of the aerogel powders up to 98% with a proper bead/wet-gel weight ratio as compared to 72% without using beads. No significant change was observed in the tapping density over a wide range of the fluidized drying condition. Consequently the fluidized bed drying approach shows a good promise as an alternative route for the large-scale production of the aerogel powders.

• 한국공간구조학회논문집
• /
• 제2권2호
• /
• pp.69-76
• /
• 2002

The basic systems of spatial structures such as shells, membranes, cable-nets and tensegrity structures have been developed to create the large spaces without column. But there are some difficulties concerning structural stability, surface formation and construction method. Tensegrity systems are flexible structures which are reticulated spatial structures composed of compressive members and cables. The rigidification of tensegrity systems is related to selfstress states which can be achieved only when geometrical and mechanical requirements are simultaneously satisfied. In this paper, the force density method allowing form-finding for tensegrity systems is presented. And various modules of unit-structures are investigated and discussed using the force density method. Also, a model of double-layered single curvature arch with quadruplex using supplementary cable is presented.

• 한국표면공학회지
• /
• 제32권6호
• /
• pp.658-664
• /
• 1999

Helicon sources are attractive for plasma processing because they provide high plasma density in low magnetic fields. Helicon waves were excited by a Nagoya type III antenna in a magnetized plasma column. Plasma parameters were measured with a double probe, and the structure and adsorption of the helicon wave fields were determined with the probes. Argon is fed through a MFC (mass flow controller) for operation pressure of 10~110 mtorr. A 13.56 MHz r.f. power of 50~450 W is induced through the antenna. The plasma density and electron temperature are measured as functions of external magnetic field, r.f. power and pressure. The plasma density as functions of r.f. power and magnetic field at a constant pressure increased linearly, and the electron temperature did not change largely with various operation parameters and the value was around 5~7 eV.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1257-1261
• /
• 2017

This paper focuses on understanding the interrupting capability of an arc contact system in a molded case circuit breaker (hereafter MCCB). We selected four types of MCCBs and analyzed the magnetic flux density distributions in the contact systems caused by the fault currents. We ascertained that the magnetic flux density profile varies according to the shape of the contact system and was asymmetric at both the ends of an arc, perpendicular to the arc column because of the magnetic grid installed in the contact system. The asymmetric difference creates a magnetic force that pushes the arc current outwards and provides an interrupting capability. We have introduced a simple analysis method for determining the interrupting capability of the contact system for an MCCB by the arc-driving magnetic flux density.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.181.2-181.2
• /
• 2015

Sputtering is one of the most popular physical deposition methods due to their versatility and reproducibility. Synthesis of Cr thin films by DC magnetron sputtering using glancing angle deposition (GLAD) has been reported. Chromium thin films have been prepared at two different working pressure($2.0{\times}10-2$, 30, $3.3{\times}10-3torr$) on Si-wafer substrate using magnetron sputtering with glancing angle deposition (GLAD) technique. The thickness of Cr thin films on the substrate was adjusted about 1 mm. The electrical property was measured by four-point probe method. For the measurement of density in the films, an X-ray reflectivity (XRR) was carried out. The sheet resistance and column angle increased with the increase of glancing angle. However, nanohardness and density of Cr thin films decreased as the glancing angle increased. The measured density for the Cr thin films decreased from 6.1 to 3.8 g/cc as the glancing angle increased from $0^{\circ}$ to $90^{\circ}$ degree. The low density of Cr thin films is resulted from the isolated columnar structure of samples. The evolution of the isolated columnar structure was enhanced at the conditions of low sputter pressure and high glancing angle. This GLAD technique can be potentially applied to the synthesis of thin films requiring porous and uniform coating such as thin film catalysts or gas sensors.

• 한국식품영양학회지
• /
• 제17권2호
• /
• pp.138-146
• /
• 2004

본 연구는 유용식물로부터 DPPH free radical scavenger및 사람의 low density lipoprotein(LDL)의 산화에 대한 항산화 효과를 조사하기 위하여 25종의 식물로부터 메탄올로 추출하여 조사하였다. 각종 유용식물 중 항산화 활성은 우수한 달맞이꽃이 가장 높았으며 다시 메타놀로 추출하여 조사한 결과 $\alpha$-tocopherol과 항산화능이 거의 비슷하였다. 메타놀 추출물을 ethylacetate로 추출한 획분이 항산화 활성이 높았으며 ethylacetate 층 중 acidic soluble 획분을 다시 분리한 후 Sepadex LH-20 column chromatography로 추출한 결과 Fraction F-2가 전자공유능이 가장 높았다. 따라서 항산화 활성이 높은Fraction, F-2의 구조를 동정한 결과 3,4-dihydroxybenzoic acid와 3-hyoxycinnamic acid로 확인되었다.

• Ocean Science Journal
• /
• 제41권3호
• /
• pp.139-148
• /
• 2006

The distribution of the taxonomical composition and the density of meiobenthos depending on the sediment type has been studied in bottom sediments of Nha Trang Bay. The maximal population density and the taxonomical diversity were observed in the silted coarse and heterogeneous sand ($1031.4{\pm}419.7\;ind.\;10\;cm^{-2}$), whereas the minimal level of density and diversity ($588.1{\pm}152.5\;ind.\;10cm^{-2}$) was in the coarse and heterogeneous sand with shell debris and corals. The correlation between the median diameter of sediment particles and population density of meiobenthos has been revealed (r=0.82, p<0.05). In bottom sediments of Nha Trang Bay, twenty six taxonomic groups of meiobenthos were observed. Nematodes dominated in all sediment types. Representatives of four orders, twenty eight families and ninety seven genera of marine nematodes were identified. The vertical distribution of meiobenthos in different sediment types was considered. A sediment column (10 cm height) was sectioned by five 2 cm portions. In the last layer (8-10 cm) the most number of meiobenthic groups was found in sandy sediments. In the lower layers of silt sediments, only nematodes were found.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.349-359
• /
• 2023

This paper presents a technique for determining the optimal number of elements in stochastic finite element analysis based on reliability analysis. Using the change-of-variable perturbation stochastic finite element approach, the probability density function of the dynamic responses of stochastic structures is explicitly determined. This method combines the perturbation stochastic finite element method with the change-of-variable technique into a united model. To further examine the relationships between the random fields, discretization of the random field parameters, such as the variance function and the scale of fluctuation, is also performed. Accordingly, the reliability index is calculated based on the explicit probability density function of responses with Gaussian or non-Gaussian random fields in any number of elements corresponding to the random field discretization. The numerical examples illustrate the effectiveness of the proposed method for a one-dimensional cantilever reinforced concrete column and a two-dimensional steel plate shear wall. The benefit of this method is that the probability density function of responses can be obtained explicitly without the use simulation techniques. Any type of random variable with any statistical distribution can be incorporated into the calculations, regardless of the restrictions imposed by the type of statistical distribution of random variables. Consequently, this method can be utilized as a suitable guideline for the efficient implementation of stochastic finite element analysis of structures, regardless of the statistical distribution of random variables.