• BMB Reports
• /
• v.35 no.2
• /
• pp.172-177
• /
• 2002

We previously reported that cholesteryl ester transfer protein (CETP) inhibitory peptides (designated $P_{28}$ and $P_{10})$ have anti-atherogenic effects in hypercholesterolemic rabbits (Biochim. Biophys. Acta (1998) 1391, 133-144). To further investigate those effects, we studied rabbit plasma that was collected after 30 h of a $P_{28}$ or $P_{10}$ injection. We found that there is a strong correlation between the in vivo CETP inhibition effects and alterations of lipoprotein particle size distribution in rabbit plasma, as determined on an agarose gel electrophoresis and gel filtration column chromatography. In vivo effects of the peptide were observed again in C57BL/6 mice that expressed simian CETP. The $P_{28}$ or $P_{10}$ peptide ($7\;{\mu}g/g$ of body weight) that was dissolved in saline was injected subcutaneously into the mice. The $P_{28}$ injection caused the partial inhibition of plasma CETP activity up to 50%, decreasing the total plasma cholesterol concentration by 30%, and increasing the ratio of HD/total-cholesterol concentration by 150% in the CETP-transgenic (tg) mice. The CETP inhibition by the $P_{28}$ or $P_{10}$ made alterations that modulated the size re-distribution of the lipoproteins in the blood stream. Particle size of the very low (VLDL) and low density lipoproteins (LDL) from the peptide-injected group was highly decreased compared to the saline-injected group (determined on the gel filtration column chromatography). In contrast, The HDL particle size of the $P_{28}$-injected group increased compared to the control group (saline-injected). The expression level of the CETP mRNA of the $P_{28}$-injected CETP-tg mouse appeared lower than the saline-injected CETP-tg mouse. These results suggest that the injection of the CETP inhibitory peptide could affect the CETP expression level in the liver by influencing lipoprotein metabolism.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.322-331
• /
• 2007

In this study, electrical resistivity tomography (ERT) were conducted to find the mineralized zone at the Geumpung mine in Dojeon-ri, Susan-myeon, Jecheon-si, Chungcheongbuk-do. The deviation of the inclined borehole was measured to obtain the exact positions of the electrodes for correcting apparent resistivity values from ERT. Geophysical loggings such as resistivity and natural gamma were conducted to obtain the properties of the material near the borehole. Measurements of the physical properties of the cores, such as porosity, water content, density, susceptibility, resistivity were performed to analyze the correlation between physical properties and resistivity. Grade analysis for core sample was also conducted to identify relationship between grade and resistivity. Rock property analysis shows that the resistivity is more dominated by susceptibility and grade than by porosity and water content in the mineralized zone. The results of ERT are well consistent with geophysical logging data and geologic column. So ERT is powerful method to identify conductive mineralized zone.

• Korean Journal of Remote Sensing
• /
• v.22 no.2
• /
• pp.141-151
• /
• 2006

UV-visible absorption measurement techniques using several horizone viewing directions in addition to the traditional zenith-sky pointing have been recently developed in ground-based remote sensing of atmospheric constituents. The spatial distribution of various trace gases close to the instrument can be derived by combing several viewing directions. Multi-axis differential optical absorption spectroscopy (MAX-DOAS) technique, one of the remote sensing techniques for air quality measurements, uses the scattered sunlight as a light source and measures it at various elevation angles (corresponding to the viewing directions) by sequential scanning with a stepper motor. A MAX-DOAS system developed by GIST/ADEMRC has been applied to measuring trace gases in urban air and plumes of the volcano and fossil fuel power plant in January, May, and October 2004, respectively. MAX-DOAS spectra were analyzed to identify and quantify $SO_2,\;NO_2,\;BrO,\;and\;O_4$ (based on Slant Column Densities, SCD) in the urban air, volcanic plume, and fossil fuel power plant utilizing theirs specific structured absorption features in the UV-visible region. Vertical scan through the multiple elevation angles was performed at different directions perpendicular to the plume dispersion to retrieve cross-sectional distribution of $SO_2\;or\;NO_2$ in the plumes of the volcano and fossil fuel power plant. Based on the estimated cross sections of the plumes the mixing ratios were estimated to 580 $SO_2$ ppbv in the volcanic Plume, and 337 $NO_2\;and\;227\;SO_2$ ppbv in the plume of the fossil fuel power plant, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.1
• /
• pp.1-14
• /
• 2023

In this study, column tests using relatively uniform Jumunjin sand media were conducted to evaluate the feasibility of calcium polysulfide (CaS_x, CPS) in removing high concentration of Zn²⁺ in groundwater. The injected CPS solution reacted rapidly with Zn²⁺ in artificial groundwater and effectively reduced Zn²⁺ by more than 99% through metal sulfide precipitation. Since the density (d = 1.27 g/cm³ ) of CPS solution was greater than that of water, CPS solution settled down rapidly while capturing Zn²⁺ and formed stable CPS layer similar to dense nonaqueous phase liquid. Mass balance analysis on Zn²⁺ in CPS solution suggested that CPS solution effectively reacted with Zn²⁺ to form metal sulfide precipitates except for high groundwater seepage velocity of 400 cm/d. With greater groundwater seepage velocity, injected CPS did not completely dissolve at the CPS-water interface, but a partially-misible CPS layer continuously moved and reacted with Zn²⁺+ in the direction of groundwater flow. Since hydraulic conductivity (K_h) decreased slightly due to the generated metal precipitates in the inter-pores of media, injection of CPS solution should be optimized to prevent clogging. As evidenced by both XRF and SEM/EDS results, ZnS precipitates were clearly observed through the reaction between the CPS solution and Zn²⁺. Further study is warranted to evaluate the feasibility of CPS to remove high-concentration heavy metalcontaminated groundwater in complex and heterogeneous media.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.95-104
• /
• 2007

This study was focused on the effect of concrete strength and lateral ties of concrete columns subjected to eccentric compressive loads. The twenty-four concrete columns with $200mm{\times}200mm$ square cross-section were tested. The main variables were concrete strength, spacing and configuration of lateral ties, and eccentricity ratios. From the experiment, the followings were investigated ; 1) In all cases, it was observed that the increase of concrete compressive strength led to the decrease of ductility. Also, as the eccentricity ratios increased, the effect of ductility enhancement by lateral ties decreased. 2) As the ties spacing decreased from 100mm to 30mm, the magnitude of axial load acting on the concrete column showed an enhancement of 1.1~1.2 times and the descending curve after a peak moment presented a smooth decline. 3) The high-strength concrete columns required a design of lateral ties to increase the volumetric ratios and density of tie spacing to sustain a proper strength and ductility. Accordingly, regardless of concrete strength, the current AIK design code to specify the maximum tie spacing of concrete columns was proven to lead to the poor strength and ductility for seismic design. Therefore, it is necessary to develop a new seismic design code that connects volumetric ratios and tie spacing of concrete columns with concrete strength.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.4
• /
• pp.548-561
• /
• 2019

The surfgrass Phyllospadix japonicus is a dominant seagrass species playing critical ecological roles on the eastern coast of Korea. However, few studies have been conducted on the ecological characteristics of this species, generally due to the turbulent water conditions in its habitat. In this study, to examine the growth dynamics of P. japonicus, we investigated monthly changes in morphological characteristics, density, biomass, and leaf productivity as well as changes in the underwater irradiance, water temperature, and water column nutrient concentrations of its habitat from August 2017 to July 2018. Underwater irradiance and water temperature showed clear seasonal changes increasing in spring and summer and decreasing in fall and winter. Nutrient availability fluctuated substantially, but did not display any distinct seasonal trend. Morphological characteristics, shoot density, biomass, and leaf productivities of P. japonicus exhibited significant seasonal variations, increasing in spring and decreasing in fall months. Spadix of P. japonicus occurred from March to August, with the maximum spadix percentage(15.8%) occurred in May 2018. The average leaf productivity of P. japonicus per shoot and area were 2.1 mg sht^-1 d^-1 and 7.5 g m^-2 d^-1, respectively. The optimum water temperature for the growth of P. japonicus in this study was between 13-14℃. The productivity of P. japonicus was not correlated with underwater irradiance, water temperature and nutrient concentrations. These results suggest that the study site provide sufficient amount of underwater irradiance, suitable water temperature range and nutrients for the growth of P. japonicus.

• Ocean and Polar Research
• /
• v.28 no.4
• /
• pp.385-393
• /
• 2006

Screening performance of the existing intake screens (drum and travelling screen) on mass impingement of marine animals, a euphausiid, Euphausia pacifica and a scyphozoan medusae, Aurelia aurita that have often clogged intake screens of the Uljin Nuclear Power Plant, was tested. The maximum tolerable densities of marine animals in the inflowing seawater upon the screen were estimated with two different approaches. First the maximum density of jellyfish was calculated from (1) passing amount of seawater per unit time through the screens and (2) the covered area of animals on the screens clogged. The maximum density of krill tolerable in the drum screen was cited from a simulated record of Uljin NPP, then those in the travelling screens were also calculated using the data of drum screen and ratio of seawater amount passing through the screens under the condition of 0.5m water column (W.C.) of the differential pressure (AP) produced by screens, an established permissible limit of ${\Delta}P$. Secondly, the screening performances were also tested by hydrodynamic measurements with various screen models in a circulating water channel equipped with a speed-controlling pump and a differential pressure gauge. From the first approach, the maximum tolerable densities of drum and travelling screen were calculated as 2.0 and $1.5ind/m^3$ for the Jellyfish and 900 and $680ind./m^3$ for the euphausiid, respectively. These densities estimated from the second approach were 2.1 and $0.8ind/m^3$ for the jellyfish and 1059 and $504ind/m^3$ for the euphausiid, respectively. These estimates were compared with the data from historic clogging events to evaluate the practical performance of these intake screens. The comparisons suggest a newly improved intake-screen of which performance should be at least seven times (approximately) better than the existing ones ior the krill and 3.2 times for the jellyfish, respectively, for preventing mass impingement, and for maintaining the condition of the differential pressure between the screens below 0.3 m W.C.

• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.63-66
• /
• 2011

The bark of Machilus thunbergii was extracted with 80% aqueous methanol (MeOH), and the concentrated extract was partitioned using ethyl acetate (EtOAc), butanol (n-BuOH), and $H_2O$, successively. From the EtOAc fraction, five lignans were isolated through the repeated silica gel, octadecyl silica gel (ODS) and, Sephadex LH-20 column chromatography. Based on nuclear magnetic resonance (NMR), mass spectroscopy (MS), and infrared spectroscopy (IR) spectroscopic data, the chemical structures of the compounds were determined to be machilin A (1), machilin F (2), licarin A (3), nectandrin A (4), and nectandrin B, (5). This study presents comparative account of five lignans from M. thunbergii bark contributing inhibition of low density lipoprotein (LDL), ACAT-1, and ACAT-2. Compounds 2-5 showed varied degree of antioxidant activity on LDL with $IC_{50}$ values of 2.1, 11.8, 15.3, and $4.1{\mu}M$. Compounds 1, 2, and 3 showed inhibition activity on ACAT-1 with values $63.4{\pm}6.9%$ ($IC_{50}=66.8{\mu}M$), $53.7{\pm}0.9%$ ($IC_{50}=109.2{\mu}M$), and $78.7{\pm}0.2%$ ($IC_{50}=40.6{\mu}M$), respectively, at a concentration of 50 mg/mL, and on ACAT-2 with values $47.3{\pm}1.5%$ ($IC_{50}=149.7{\mu}M$), $39.2{\pm}0.2%$ ($IC_{50}=165.2{\mu}M$), and $52.1{\pm}1.0%$ ($IC_{50}=131.0{\mu}M$, respectively, at a concentration of 50 mg/mL.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.22-29
• /
• 1996

Immobilized bioprocess was carried out for continuous production of cyclosporin A (CyA) produced intracellularly as a secondary metabolite by a filamentous fungus, Tolypocladium inflatum. Immobilization procedure for entrapping conidiospores of the producer was significantly simplified by use of a modified immobilization technique. A newly-designed immobilized perfusion reactor system (IPRS) showed good process benefits as demonstrated by the role of the high density immobilized cells as an efficient biomass generator, continuously supplying highly active CyA-producing free cells (1.0g/$\ell$/hr) even at very high dilution rate ($0.1hr^{-1}$). IPRS bioprocess was possible since efficient decantor system developed in our laboratory separated the sloughed-off free cells from the immobilized biomass effectively, thus overcoming wash-out phenomenon frequently encountered in continuous free cell cultures. Furthermore the released-free cells remaining in the bulk solution did not appear to cause substrate mass transfer limitation which was often experienced in suspended mycelial fungal cell fermentations. The primary reason for this was that the suspension broth of the IPRS mainly consisted of roundshaped short mycelial fragments and conidiospores, still remaining Newtonian even at high cell density. In parallel with IPRS bioprocess development, other key factors to be considered necessarily for significant increase in CyA productivity would be strain improvement and medium optimization for the immobilized cells.

• Applied Biological Chemistry
• /
• v.46 no.3
• /
• pp.246-250
• /
• 2003

In order to isolate antibacterial substances from the rhizome of Zingiber mioga Roscoe, the ethanol extracts was fractionated according to the activity against Bacillus subtilis, B. cereus and Staphylococcus aureus. Three antibacterial substances were isolated and purified by column chromatography and recrystallization. Compounds I and III showed activity against all the tested bacterias and compound II exhibited the activity against B. subtilis and B. cereus S. aureus. Compound I was examined antimicrobial activity against B. subtilis, B. cereus and S. aureus by optical density using Bioscreen C. Compound I showed strong growth inhibition at 10 ppm on B. subtilis and B. cereus for 72 hrs, and at 25 ppm on S. aureus. On the basis of spectrometric studies including $1^H-NMR$, ${13}^C-NMR$, DEPT, IH-lH COSY, HMQC, HMBC and IR, compounds I, II and III were identified as $(E)-8{\beta}(17)-epoxylabd-12-ene-15,16-dial\;(C_{20}H_{30}O_3,\;MW=318)$, galanolactone $(C_{20}H_{30}O_3\;MW=318)$ and galanal A $(C_{20}H_{30}O_3,\;MW=318)$, respectively. These results are the first reports on the isolation of $(E)-8{\beta}(17)-epoxylabd-12-ene-15,16-dial, galanolactone and galanal A from the rhizome of Zingiber mioga.