• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.155-168
• /
• 2019

This paper presents the results of an experimental investigation on the compressive strength of small scale concentrically axially loaded fiber-reinforced polymer (FRP) confined plain concrete columns, with cylinder concrete strength 19 MPa. For columns with circular (150-mm diameter) and square (150-mm side) cross sections wrapped with glass- and carbon-FRP sheets (GFRP and CFRP, respectively) applied with dry lay-up the effect of different jacket schemes and different overlap configurations on the confined characteristics is investigated. Test results indicate that the most cost effective jacket configuration among those tested is for one layer of CFRP, for both types of sections. In square sections the location of the lap length, either in the corner or along the side, does not seem to affect the confined performance. Furthermore, in circular sections, the presence of an extra wrap with FRP fibers parallel to the column's axis enhances the concrete strength proportionally to the axial rigidity of the FRP jacket. The recorded strains and the distributions of lateral confining pressures are discussed. Existing design equations are used to assess the lateral confining stresses and the confined concrete strength making use of the measured hoop strains.

• 대한두개안면성형외과학회지
• /
• 제19권1호
• /
• pp.3-12
• /
• 2018

Background: Millard's rotation-advancement repair, which is used by many surgeons, can make a natural philtral column, but most surgeons use a modification of the rotation-advancement flap. The purpose of this article is to introduce a modification utilized by the authors and to provide detailed surgical procedure. Methods: We retrospectively reviewed 82 patients' medical records and presented surgical technique and outcomes. The main features of the authors' strategy are emphasizing horizontal length of the lip, orbicularis oris muscle duplication for improving the definition of the philtral column, overcorrection of domal portion than the non-cleft side in order to compensate for the recurrence during growth. Two judges rated two times the appearance of the patients' nose and lip using Asher-McDade aesthetic index. Intra- and interobserver reliabilities were determined using Cohen's kappa statistics. Results: All patients recovered eventually after surgery; however, two patients have a minor complications (wound infection in one patient, wound disruption due to trauma in the other patient). The improvement of the aesthetic results can be achieved with this modified Millard technique. Total mean scores of the Asher-McDade index was 2.08, fair to good appearance. The intraobserver reliabilities were substantial to almost perfect agreement and the interobserver reliabilities were moderate to almost perfect agreement. Conclusion: We modified Millard method for repair of complete unilateral cleft lip. The surgical outcomes were favorable in long-term follow-up. We hope our technique will serve as a guide for those new to the procedure.

• 복식
• /
• 제19권
• /
• pp.141-155
• /
• 1992

The Buddhist costumes, unlike the ordinary ones, have not been studied comprehensively due to their religious, non-popular and non-social features. In this regard, this paper aimed at reviewing the styles and symbolic Characters of the monks' dancing costumes for the traditional Buddhist ceremony of 'Spirit Vulture Peak'(The Intangible Cultural Asset No.50.) Here, the 'Spirit Vulture Peak Ceremony' is a kind of Buddhist ceremony commemorating the Buddha's preaches on the peak of Mt. Grdhrakuta by means of symbolized ritual and reformation procedures. The methodology of this study depended on the research of literatures, personal observation of the actual ceremony and the discussion with Priest Park Song-am. The dancing style of the Ceremony can be divided into four categories; the cymbal dancing., the drum dancing , the butterfly dancing and the column-beating dancing. And for the dancing costumes, the loose ritual mantle, the long-sleeve robe and the buddhist costume are used; the loose mantle and the long-sleeve robe are for the drum dancing. The style of the loose mantle is rectangular, sewn every odd knot between 5 and 25 ones. According to the record, its color was initially grey or red-yellow, but varied depending on the local rules. The four corners of the loose mantle have a rectangular-cloth embroidery of sky & king patterns, and the center is embroidered with the Sun'Moon designs or 'Om/Nan' letters in the Korean spells. The light of Sun/ Moon designs symbolizing the sky and the earth respectively are indigenous to a particular school in Korea. The long-sleeve robe has a traditional over-coat style. and is called otherwise of if some design is added. The total clothing or dancing costumes for the Ceremony include 'the Dae-ryung (meaning great peake)loose mantle', 'the White Paldad(meaning Chinese Character eight) long-sleeve robe and the peaked hat. The Dae-ryung mantle is a kind of ritual costumes with the shorter length than the ordinary mantles, and has a character 'Ryung' in Chinese spell attached with three to six colors. The White Paldae robe is shorter than the ordinary robes in the total length but longer in the length of sleeves. It is put on over the mantle from the left shoulder, and used often for the butterfly and column-beating dancings. It is hoped that this study will promote the study on the customs and rites of the Buddhism rather than on the thoughts, and contribute to the further studies.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.240-240
• /
• 2011

The first neutral beam injector (NBI-1) has been developed for the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak. A first long pulse ion source (LPIS-1) has been installed on the NBI-1 for an auxiliary heating and current drive of KSTAR core plasmas. Performance of ion and neutral beam extractions in the LPIS-1 was investigated initially on the KSTAR NBI-1 system, prior to the neutral beam injection into the main plasmas. The ion source consists of a JAEA magnetic bucket plasma generator with multi-pole cusp fields and a set of KAERI prototype-III tetrode accelerators with circular apertures. The inner volume of plasma generator and accelerator column in the LPIS-1 is approximately 123 liters. Final design requirements for the ion source were a 120 kV/ 65 A deuterium beam and a 300 s pulse length. The extraction of ion beams was initiated by the formation of arc plasmas in the LPIS-1, called as an arc-beam extraction method. A stable ion beam extraction of LPIS-1 has been achieved up to an 100 kV/42 A for a 4 s pulse length and an 80 kV/25 A for a 14 s pulse length. Optimum beam perveance of 1.21 microperv has been found at an accelerating voltage of 80 kV. Neutralization efficiency has been measured by using a water flow calorimetry (WFC) method of calorimeter and an operation of bending magnet. The full-energy species of ion beams have been detected by using the diagnostic method of optical multichannel analyzer (OMA). An arc efficiency of the LPIS was 0.6~1.1 A/kW depending on the operating conditions of arc discharge.

• Elastomers and Composites
• /
• 제22권1호
• /
• pp.11-19
• /
• 1987

A coil pyrolyzer and processor-controlled gas chromatograph were used for analysis of rubber for compounding ratio of the single and blend rubber vlucanizates. Variables such as sample size, pyrolysis temperature, time allowed for pyrolysis, the column packing material, its length and programmable temperature for gas chromatography were examined to obtain optimum condition for application to NR, BR and SBR blends. By application fixed conditions, three kinds of standard curves were finally obtained from thirty samples of blend vulcanizates which were prepared in the pilot plant, NIRI. It is possible to determine rubber composition and their ratio in NR, BR and SBR products by pyrolysis.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.379-388
• /
• 2012

Objective: This study developed a new shower carrier prototype to reduce caregivers' muscle burden and to increase use convenience by reflecting the needs of domestic long-term care institutions. Background: In the long-term care institutions, one of the ADL(Activities of Daily Life) factors is bathing/showering. Recently, bath/shower-assisting equipment is actively being introduced in care institutions to reduce the caregivers' care cost, but most of the domestic equipment was designed to imitate foreign products and rarely reflected the needs of care institutions. Method: Based on Korean elderly people's body information, the bed size(length: 1,900mm, width: 650mm) was set-up, and a variable headrest with a newly designed headform was developed to provide the comfort for the elderly and convenience for caregivers. To reduce caregivers' muscle burden on transferring and showering activities, a 3-step column lifting module equipped with dual actuators(lowest/highest levels from the ground: 600/1,100mm, Stroke: 500mm) was developed, and the wheelbase parameter(length: 1,250mm, width: 580mm) was defined securing the turn-over safety of the shower carrier. The drivability tests were performed for the prototype and foreign product, and the male and female subject's muscle activities were measured through the tests. Results: The structural stability of the shower carrier prototype was secured by finite element analysis, and the muscle activities of the subjects through the drivability tests largely decreased in the prototype, compared to the foreign product. Conclusion: In this study, a new shower carrier prototype was developed to possibly reduce caregivers' muscle burden and to increase use convenience based on the needs of long-term care institutions. It was expected that the drivability performance of the prototype could be relatively superior to that of the foreign product. Application: The results obtained from the study can be applied for the optimal development of a shower carrier including other equipment to effectively care for the elderly.

• 콘크리트학회논문집
• /
• 제28권1호
• /
• pp.13-21
• /
• 2016

기존의 강재 보가 콘크리트에 매립되어 볼트접합 연결되는 기존 하이브리드 접합법의 한계와 단점을 개선하기 위하여 단순한 강접합 절점을 갖는 하이브리드 PC 콘크리트 보 시스템을 개발하였다. 개발된 하이브리드 시스템의 원할한 하중전달을 파악하기 위하여 양단 고정단의 보 실험체 3개를 반복 집중하중 하에서 실험하였다. 주요 변수는 강재 보의 길이로서 지점에서 변곡점까지의 거리의 0.25, 0.5 및 1.0배로 변하였다. 모든 실험체는 동일 주철근 지수를 갖는 철근콘크리트 보에 비해 높은 변위 연성비를 나타냈는데, 보의 반복하중-처짐 관계 및 연성은 강재 보의 길이에 영향을 받지 않았다. 보 길이에 따른 연속 변형률 분포 및 붕괴하중에 기반한 극한하중 예측으로부터 제시된 강접합 절점은 구조적 효율성을 갖는다고 판단된다.

• Applied Microscopy
• /
• 제41권1호
• /
• pp.31-35
• /
• 2011

본 연구는 물윗수염박쥐(Myotis daubentonii ussuriensisi)의 정자 미세구조적 특징을 알아보기 위하여 투과전자현미경(TEM)으로 관찰한 결과는 다음과 같다. 물윗수염박쥐 정자두부의 길이는 $4.5{\mu}m$, 폭은 $2.0{\mu}m$이었으며, 핵은 그 중 $4.3{\mu}m$로 정자두부의 대부분을 차지하고 있었으며, 핵의 후방부에서 전방부쪽으로 갈수록 폭이 가늘어지며 두부의 전체적인 모양은 탄환형(bull-shaped)을 취하고 있었다. 또한, 핵과 첨체는 Apical body에 의해 분리되어져 있었다. 정자경부는 basal plate, capitulum, segmented columns으로 구성되어져 있었다. 12~14개의 가는띠로 구성된 Segmented columns들의 밑부분은 중편부의 외측섬유와 연결되어져 있었다. 중편부의 미토콘드리아 초들은 나선상으로 배열되어져 있었으며, 그 수는 57개이었다. Satellite fibers는 외측섬유들 사이에 불규칙하게 관찰되어 졌으며, 중편부를 제외하고 다른 부분에서는 관찰되지 않았다. 중편부의 외측섬유는 1, 5, 6, 9번이 다른 것보다 크며, 꼬리의 축사구조는 전형적인 9+2구조이었으며, 미부의 미세소관들은 불규칙하게 배열되어져 있었다.

• 한국식품영양과학회지
• /
• 제18권2호
• /
• pp.205-210
• /
• 1989

Capillary column GLC 및 GCMS를 병용하는 분석방법을 이용하여 식물유 트리글리세리드 분자종과 산화안정성과의 관계를 밝히기 위해서, 규산 컬럼으로 분획한 대두유 트리글리세리드를 모델 시료로 하여 $60^{\circ}C$, 암소에서 저장하면서 산화에 따른 트리글리세리드 각 분자종의 산화안정성을 조사하였다. 대두유 트리글리세리드의 주요 분자종은 LLL(19.6%), OLL(17.4%), PLL(14.2%), OLO(10.2%) 및 PLO(9.4%)이었으며, 트리글리세리드 분자종의 산화안정성은 전반적으로 구성불포차지방산의 이중결합수가 적을 수록 증가하는 경향을 보였다. 그런데 트리글리세리드를 구성하는 불포화지방산들의 이중결합수가 같을 경우는 불포화도가 낮은 지방산이 결합되어 있는 분자종의 산화안정성이 높았고, 또 결합되어 있는 불포화지방산의 이중결합수 및 불포화도가 똑같은 경우에는 공존하고 있는 포화지방산의 acyl의 사슬길이가 짧은 분자종의 산화안정성이 높은 것으로 밝혀져, 식물유 트리글리세리드 분자종의 산화안정성에는 구성불포화지방산의 이중결합수와 불포화도 및 공존하고 있는 포화지방산의 acyl기의 사슬길이가 중요한 영향을 미치는 인자임을 알 수 있었다.

• 한국전산구조공학회논문집
• /
• 제29권5호
• /
• pp.429-436
• /
• 2016

연구에서는 철근콘크리트 건물에 대한 유전자 알고리즘 기반의 최적구조설계기법을 제시하고자 한다. 목적함수는 구조물의 비용과 이산화탄소 배출량을 동시에 각각 최소화하는 것이다. 비용 및 인산화탄소 배출량은 구조설계안에서 얻을 수 있는 단면치수, 부재길이, 재료강도, 철근량 등과 같은 설계정보를 통해 계산한다. 즉, 구조물의 물량을 기초로 하여 비용과 이산화탄소 배출량을 평가한다. 재료의 운반, 시공 및 건물 운영 단계에서 발생하는 비용 및 이산화탄소 배출량은 본 연구에서 제외한다. 제약조건은 철근콘크리트 건물을 구성하는 기둥과 보 부재의 강도조건과 층간변위조건이 고려된다. 제약조건을 평가하기 위해 OpenSees를 활용한 선형정적해석이 수행된다. 제약조건을 만족시키면서 목적함수에 대해 최소의 값을 제시하는 설계안을 찾기 위해 유전자 알고리즘이 사용된다. 제시한 알고리즘의 적용성을 검증하기 위해 4층 철근콘크리트 모멘트 골조 예제에 제시하는 기법을 적용하여 검증한다.