• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.79-89
• /
• 1998

This study was carried out the effect of stability and color extract for it's condition in the curcuma L.. dyeing. The stability is to investigate the absorbance of the curcumin, one of the major yellow pigments and the stability regarding the effect of light, oxygen temperature and pH. The dyeing condition is compared the effect of mordanting condition and the best way to extract pigment and analysed through the color-fastness rating, color-difference value test. The main results obtained are summarized as follows ; 1.The best and proper solvent to extrect curcumin pigment was a ethanol and a distilled water. 2. The light effect indicated that the absorbances of solution in absence of ligh was more stable. 3. The oxygen(O2) effect to curcumin show-ed that the condition in the absence of O2 was more stable than that in presence of O2 4. The temperature showed that the absorbnace was best stable in4$^{\circ}C$ and less changed at $25^{\circ}C$ 5. The curcumin-etanol solution was stable in pH 2~4. 6. Generally color-fastness rating to silk, wool and cotton indicated that crocking C.F. and perspiration C.F. were more than 3rd grade and dry cleaning C.F. was more than 4th grade. But light color-fastness and washing color-fastness were very poor. 7. To make good color fastness, the mordan-ting treated group and the pre-mordant conditions were more effective than others 8. When compared with color-difference value test indicated that the silk was looks like more reddish and bluish color and than the wool and cotton were greenish and bluish. As a mordant, A(C2H4OH(COOH3) and D(K2Cr2O7)were more effective to make green-ish color in the silk and the reddish color was abtained by B(Al.K(SO4)2.12H2O) and C(FeSO4.7H2O).

• The Korean Journal of Community Living Science
• /
• v.17 no.1
• /
• pp.79-86
• /
• 2006

This study purposes to find the best one for dyeing with artemisia in order to develop a more efficient method of dyeing with artemisia and investigates the antibiotic activities of artemisia. After dyeing cotton, rayon, silk, wool and nylon fabrics with dyebath extracted from artemisia, observation on dyeability by temperature, concentration and time has been carried out. And I took an observation on color change, color fastness to washing and color fastness to light after mordanting treatment. Also observation on the antibiotic properties of non-dyed fabrics, artemisia-dyed fabrics and artemisia-dyed fabrics with post-mordant has been performed to investigate the antibiotic activities of artemisia. And the following results have been obtained. 1. The dyeability of artemisia was better for protein fabrics such as silk or woo and amide-based synthetic fabrics like nylon than for cellulose fabrics such as cotton and rayon. 2. For all tested fabrics, the dyeability was increased as the concentration of artemisia dyebath, dyeing time and dyeing temperature was increased. Especially the dye ability for protein fabrics was most affected by the temperature, and high dyeability was obtained at high temperatures. 3. For the color fastness of artemisia-dyed fabrics with mordanting treatment, the color fastness to washing was good with grade of 4-5 while the color fastness to light ranged from grade 2 to grade 3, which requires improvement for practical use. 4. The artemisia-dyed fabrics were shown to have much higher antibiosis than the non-dyed fabrics, and the artemisia-dyed fabrics with mortanting treatment showed the following result; Cu 99.9%, Al 64% and bittern 64.7%.

• Textile Coloration and Finishing
• /
• v.3 no.4
• /
• pp.1-6
• /
• 1991

The influence of chemical structure of Benzopurpurine 4B and Congo Red on the color fastness properties of cotton fabric have been studied at $90^{\circ}C$. Each dyeing carried with $10\times10^{-6}M$ of dye concentration and 0.1 M of NaCl. The results obtained from this study were as follow; 1. The properties of fastness to washing by Benzopurpurine 4B were superior to those of Congo Red. 2. The properties of fastness to light by Congo Red were superior to those of Benzopurpurine 4B. 3. The color variation appeared more vividly in the case of Benzopurpurine 4B than Congo Red and the color shifted to Red Purple after washing test but to Yellow Red after Fade-O-meter test.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.8-18
• /
• 2004

In order to study on the color change of silk dyed with natural colorant due to light fading, and find out the effect of combination dyeing, colorant extracts of safflower red, safflower yellow and amur cork tree were used, either singly or in combination. In combination dyeing, safflower yellow or amur cork tree dyeing process was added on the top of the silk fabric was dyed with safflower red. Color change and light fastness were investigated by $L^*,\; a^*,\; b^*$ H, V/C, and Color difference. Brightness of silk fabric dyed with safflower red and safflower yellow increased gradually with increasing the radiation time of UV light, but amur cork tree was decreased and turned to dull. Color difference of dyed with Amur cork tree showed higher than the others. Combination dyeing of safflower red and amur cork tree provided better light fastness than the one of safflower red and safflower yellow.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.98-106
• /
• 2019

The dyeability and fastness properties of super-hydrophobic navy dyes having different length of alkyl groups were investigated on ultra high molecular weight polyethylene fabrics. Those dyes exhibited strong color strength in the wavelength of mainly 550~650nm, which meant that they were navy color. From the results accomplished under various dyeing conditions, it can be concluded that those dyes have higher affinity on the fibers at $130^{\circ}C$ than at the lower dyeing temperature. Considering processing time and thermal damage of the fibers, one hour is good enough to obtain full strength of color. Maximum color strength was obtained at 2~3%owf of pure dyes. Except for the rub fastness under dry condition, all fastness such as to washing and light showed as good as of 4~5 ratings.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• Textile Coloration and Finishing
• /
• v.3 no.3
• /
• pp.15-22
• /
• 1991

The effects of electrolytes on color fastness properties of cotton fabric with Congo Red have been studied at $90^{\circ}C$. Each dyeing carried with $10 \times 10^{-6}M$ of Congo Red and with various concentration of electrolytes. The results obtained from this study were as follow 1. In the case of none, the fastness to washing became worse, but the fastness to light better with increasing dye concentration. 2. In the case of additing an electrolyte, the fastness to washing became worse and the fastness to light better than the case of none. The samples had become yellower after washing test. Yellowness had been reduced after fade-O-meter test. 3. What kind of electrolytes could not have any effect on the fastness to washing, but they influenced the fastness to light in the order of LiCl

• Korean Journal of Human Ecology
• /
• v.11 no.4
• /
• pp.391-400
• /
• 2002

This study was intended to research the dyeing with natural walnut hull extracts over cotton, flax, rayon, wool, nylon and silk. We studied the dyeing conditions and mordant effect, and observed dyeability. The result are as follows: 1. In the dyeability with natural walnut hull extracts, protein and polyamide fiber has more dye uptake rather than cellulose fiber. 2. The optimum condition in the dyeing with natural walnut hull extracts was at $90^{\circ}C$, 12%(o.w.b) concentration in 90 mins. 3. In the case of the dyeability by repeated dyeing number, the dyeability of good dyeability fiber is improved in the first or second dyeing, but that of bad dyebality fiber is improved when it is dyed more repeatedly. 4. In the dyeablity treated with mordants, Al, Sn, and Mg don't have any differences, but Cu and Fe have some difference. The color of Fe mordant is green and the color of Cu mordant is blue. 5. In the case of the color fastness with mordant treatment, nylon is better than silk and wool in color fastness to washing but silk is better than nylon and wool in color fastness to light.

• Textile Coloration and Finishing
• /
• v.27 no.3
• /
• pp.202-209
• /
• 2015

Many of the natural dyes used for natural dyeing are difficult to maintain colorfastness due to their complex structure and specific properties. Therefore, there is a need for developing of color sustainable ability for use as an advanced coloring agent for fabrics, which would eco benign or not. In this study, the natural dye extracted from the waste of grape fruits was used to dye cotton fabric. Thus, the present study aims at extraction of color from grape seeds, skin, and stem through fermentation and then employing the same in dyeing and mordanting of cotton. Dyeing experiments were done under different conditions of fermentation and protein type mordants which were treated before and after dyeing. Experimental fabrics were used with cotton after scouring. Color value of dyed fabrics and color fastness of cotton dyed fabrics to washing and light were measured. The fastness of dyed experimental fabrics was increased by mordanting of protein fermentation and the color of dyed cotton was light red purple. The color of dyed fabric found with the optimum mordant treatment when treated with pre milk-mordant at $40^{\circ}C$ for 30min and 3% grape seed extract. On the whole, reddish tone very slightly increased with the milk pre-mordant. The color fastness of dyed cotton fabrics to light and washing was increased after fermentation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.1
• /
• pp.73-84
• /
• 2002

The purpose of this study was to investigate the natural dyeability on extract of Aloe Vera princeps. The experimental items were divided into the mordanting method, component of fabric, extracting portion, and kind of mordants. The experimental study was done to by laundering, abrasion(dry/wet), perspiration(acid/alkali), light fastness test and color difference by C.C.M system. The summerized finding resulted from experiments and investigation are suggested as follows: First, in the C.C.M test on mordanting method, color difference was significantly improved when mordants were treatmented. And the premordanting method showed the highest color difference. Second, in the C.C.M test on component of fabric, color difference of silk was higher than cotton. It was considered that silk has -$\NH_2$, -COOH, -OH more than cotton. Third, in the C.C.M Test on extracting portion, color difference of extracting in skin of Aloe leaf was three times higher than that of inside lump. Forth, in dyeing-fastness on mordants, laundering fastness showed 3 ~ 4 grade nearly. In perspiration-fastness(acid/alkali), Al(4~5/4~5) was the highest. In abrasion-fastness(dry/wet), cotton(4~5/4~5) was higher than silk (4~5/4) in all mordants. In light-fastness, silk(2~5) was higher than cotton(1~2) generally and especially Cu mordant of silk(4~5) was the highest. Sixth, in color difference analysis on 7 mordants Cu(29.9), Fe(28.7) and Cr(28.9) showed the highest in silk. And Cu(12.7), Fe(10.42) and Sn(10.43) showed the highest in cotton and Al(23.6, 8.0) showed the lowest in silk and cotton.