• 패션비즈니스
• /
• 제13권6호
• /
• pp.61-75
• /
• 2009

The objective of this research is to the enhance the color function of work clothing : to research and analyze the hue and tone of work clothing colors to be used for machinery and heavy industries in national industrial complexes, Through this research, the color using problems which related with safety workers will be revealed. For this project, total 42 sets of work suits were sampled from 12 different companies in the machinery and construction industries in the national industrial complexes of Gyeongsang Namdo Province and 16 sets of work suits currently being sold in the market. The collected work suits samples were classified according to item types and design. Color measurements were taken thus: After calibration according to ASTM D1729 specifications of standardized configuration settings to match standardized luminous source D65(Daylight 6500K) in color cabinet BOTECK SuperLight-VI, the RGB values of the work suits were calculated using PANTONE Color Cue TX. The RGB values of the colors thus derived were converted into V/C values using the Munsell Conversion 9.0.6 and analyzed with Munsell's 10-color system and PCCS. The results were presented according to Munsell's color wheel and color and brightness distributions were expressed in table form, as well as presented as a tone map. Following analysis, color hue distribution was found to be concentrated around PB, and brightness distribution toward the low end and mid range of the scale. Saturation values were distributed mostly around the low end of the scale. Following color tone analysis according to PCCS, it became apparent that colors were mainly distributed around dkg, ltg, and g, at low- and mid-brightness and low-saturation. Therefore, it may be concluded that colors used in work suits in the machinery and heavy industries are mainly cool colors, at low- and mid-brightness and low saturation. It is conjectured that such colors were applied uniformly in the workplace in order to serve certain functions, such as concealment of stains and contamination. Therefore, it follows that the utilization of colors, among other functions served by working clothings, must be taken into consideration in order to enhance safety and efficiency.

• 한국실내디자인학회논문집
• /
• 제24권2호
• /
• pp.171-179
• /
• 2015

The aim of this study is to figure out the preference features on design components of shop facade on the basis of the questionnaire survey on short-term memory and sensory memory of human right after an image experiment. As for a preceding research, this study examined the design features of facade into tangible elements and intangible elements, and also classified them into physical, aesthetical, marketing and symbolic components in detail. And, it extracted 5 representative elements in preceding studies including shape, material, pattern, color and sign, which is the standard of a questionnaire survey and preference analysis. The subjects of the experiment were 30 men and women who were over 20 years old majoring interior design. They were exposed to 20 images with 10 seconds respectively through a video, and were asked to respond the questionnaire promptly. The findings of preference analysis of design components of facade including shape, material, pattern, color and sign are as follows. Firstly, shape was the most interesting and attracting component, and designs applied with shape of objects such as 'web', 'drawer', 'wheel' and 'button' obtained high preference. Secondly, as for material, block, steel, exposed concrete board attracted higher preference as memorable materials than other materials. Material was affected by shape, pattern and color. Thirdly, pattern was the most lasting element. Designed pattern had higher preference than simple pattern. Fourthly, as for color, red and green with strong stimulation and attention attained priority having long lasting memory. Fifthly, when visiting a shop, sign out of 5 elements of shape, material, pattern, color and sign drew attention the most. As for the preference of location of sign, 'center top' was the most noticeable. The findings of this study could be utilized for facade design, and also could be used for commercialization considering highly preferred components, and top preference aspects of such elements. advised that to give an impression to customers is important to make a successful design for sales marketing, which, in turn, would lead customers to revisit the shop.

• 한국정보통신학회논문지
• /
• 제20권7호
• /
• pp.1317-1324
• /
• 2016

아두이노 플렛폼을 활용하여 스마트 주얼리에 보석처럼 빛나는 효과를 나타내기 위해 감성적인 주얼리로 색을 표현하였다. 감성적인 색 표현을 위해 플러칙의 감정 팽이 모형을 활용하여 감정과 색의 유사성을 적용하였다. 스마트폰에서 쉽게 접할 수 있는 온도, 조도, 소리, 자이로 센서와 스마트 주얼리의 맥박센서로부터 인식된 값을 입력받아 감성을 인식하고 처리하는 과정은 온톨로지 기반의 추론규칙을 적용하고, 상황정보에서 나타난 감성에 따라 감성 색을 찾고 그 감성 색을 스마트 주얼리의 LED에 적용하였다. 주얼리 착용자의 감정에 따라 스마트 주얼리에 내장된 LED에 결정된 감성 색으로 빛을 냈다.

• 한국한의학연구원논문집
• /
• 제12권1호
• /
• pp.39-48
• /
• 2006

The Following is a list of specific external and internal morphology of Rheum palmatum L. and R. undulatum L. in Rhei Rhizoma. 1. For the original plants of Rhei Rhizoma in the literatures. 18 plants are reported. 2. The external characteristics of original plant : R. palmatum has a large palmate leaf, its petiole of radical leaf has a simple bristle and its flower is purple and pink color. Whereas R. undulatum has a medium ovate leaf, its petiole of radical leaf is purphish, its stem leaf surrounds a half of stem and its flower is yellowish white color. 3. The character of herbal states : a. diameter and size-- R. palmaum is bigger and heavier than R. undulatum. b. in section--R. palmatum is dark brown color, R. undulatum is bright brown color Fibrovascular bundle is arranged in circle shape in R. patmatum. R. undulatum shows a distingushed wheel shape. 4. The internal characteristics : R. palmatum has a large intercellular space of cork layer, its cambium is clear and a xylem medullary ray is comparatively tight, Whereas R. undulatum has a tight intercettular space of cork layer., its cambium is a few clear and xylem medullary ray is verty tight. As these results, additional study is required to distinguish herbs and their effect among many kinds of same genus-degree of relatedness.

• 복식
• /
• 제59권3호
• /
• pp.109-130
• /
• 2009

This study examines the rotor characteristics of Guybang culture (women's living in Joseon) relics which the life images and mental world of women in Joseon if expressed to prepare rotor data to be utilized in modern design and information for color identity establishment of Korean women culture. The result of this study is as following: 1. From 176 pieces of relic photos, total of 1380 color chips were extracted. For color analysis, 1368 units (99.1%) of color data excluding achromatic 12 units (0.9%) among 1380 units of colors were used. With the standard of 10 color wheel of Munsell Color System, the result of studying distributions according to frequency, red was the highest by 25.9%, yellow was 21.4% in women's goods in Joseon period which the ratio of red and yellow was 473%. Other than that, GY 14.6%, YR 11.3% and RP 11.1% followed next which is studied that the warm colors that conveys enjoyable and glamorous feelings composed 84.3%; 2. As a result of tone analysis, high value low chroma ltg color showed highest distribution of 20% and d was 12.2%, b was 11.7% and sf was 8.8%. Generally, it showed high frequency in high value cocors such as ltg, sf and b of 40.5%t and in low chroma (ltg) and medium chroma (d, sf) of 41% and colors in bright and calm image was used the most. 3. As a result of analyzing relationship between hue & tone, the ltg tone of Y close to white in traditional color sensibility showed the highest frequency of 9.6% and ltg tone of GY(6.4%), b tone of RP(6.1%), and v(5.4%), b(5.4%), dp(5.3%) of R followed next. 4. As a result of analyzing the characteristics of coloring, it showed that in case of coloring contrasting hues, it is adjusted similar tones and in case of coloring less contrasting hue, the difference in tone is adjusted to be rather large to make harmonized coloring. Moreover, in case of coloring similar hues, the ratio of using same tone and similar tone was large which the coloring of calm image and dynamic image is all used.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.486-491
• /
• 2005

There come various types of robot with researches for mobile robot. This paper introduces the multi-joint snake robot having 16 degree of freedom and composing of eight-axis. The biological snake robot uses the forward movement friction and the proposed artificial snake robot uses the un-powered wheel instead of the body of snake. To determine the enable joint angle of each joint, the controller inputs are considered such as color and distance using PC Camera and ultra-sonic sensor module, respectively. The movement method of snake robot is sequential moving from head to tail through body. The target for movement direction is decided by a certain article be displayed in the PC Camera. In moving toward that target, if there is any obstacle then the snake robot can avoid by itself. In this paper, we show the method of snake robot for tracing the target with experiment.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.131-132
• /
• 1998

The purpose of this study is to keep drivers from falling asleep at the wheel, it is necessary to find ways of detecting and relieving drowsiness. For the estimation of our warning system, we measured the physiological parameters such as EEG, ECG, EOG while they performed a monotonous task intended to induce drowsiness. The effects of a oxygen, odor and various colors on the subjects while in a drowsy state were examined. It was found that a combination of a certain amount of oxygen and odor such as a menthol and yellow color can have a positive effect of relieving drowsiness.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1371-1374
• /
• 2009

According to depth cues of an image, the optical engine of the solid volumetric true 3D display can project a sequence of slices of a 2D image to corresponding display at a set of liquid shutters (LC) locating at different depth. A single DLP optical engine developed for a solid volumetric true 3D display consists of a lamp, reflector, color wheel, hollow integrator, relays, DMD, and projection lens. The simulation results show that the optical engine designed for single DLP volumetric true 3D display satisfies the requirements.

• 한국실내디자인학회논문집
• /
• 제27권1호
• /
• pp.156-164
• /
• 2018

This study analyzed the characteristics of Physical Environment of existing free shuttle bus Interior centered on elderly people who frequently use free shuttle buses. The purpose of this study is to provide basic data that can be used for improvement of existing free shuttle buses. In the case of the old type, in terms of accessible design, the middle entrance is not normally opened except the wheelchair occupant, so that the entrance of the front wheel is always used. Therefore, most elderly people go to the back seat and travel distance is twice longer. In addition, many stairs caused frequent inconveniences for boarding. In the case of the new type, it is planned to be a low-floor type, and various types of safety rods and handles, pictograms for enhancing the information convenience are well-equipped, and the measured value of the overall design characteristic is high. However, in the case of mental stability, it was confirmed that the seat of the bus is colored with a cold color system and is in a different relationship with the warm color which can feel mental stability. Overall, both old and new shuttle buses lack audiovisual feedback on bus routes and route guidance in terms of Supportive design. Also, since the cleaning tools and other miscellaneous items were left in the room, it became an obstacle to space utilization in terms of adaptable design. In terms of safety, both shuttle buses did not come into view with fire extinguishers shaded by miscellaneous items. Therefore, immediate action is unlikely in case of emergency. This problem should be resolved quickly.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.125-131
• /
• 2005

Recently, to improve condition car park, using surface finishing material for variety color and property epoxy resin, urethane, cement mixed resin mortar or polymeric resin, and so on. However, it is frequent noise and wear out of tier and waterproofing materials, when the car slip or stop in car park, To minimize these cases, It is necessary that reduction of repair cost through performance long term durability of surface finishing material, improvement inside condition such as reduce dirty and car accident and ensurance the expected life of concrete slab in car park. Especially, we have not any tech for quality control, construction tech, production technology for car park surface materials, that's why park slab is not safety and suffer a loss. For this problems, this paper is to test surface finishing materials and as that result, suggest quality standard in the car park.