• KSTLE International Journal
• /
• v.9 no.1_2
• /
• pp.1-6
• /
• 2008

In this study is performed a complex lubrication analysis of a herringbone groove air journal bearing, which shows a big potential as an oilless bearing for a color wheel used as an original color source for a large DLP projection television and rotating at a rated-speed of 10,800 rpm. The Galerkin FE and perturbation methods are used for a lubrication analysis of the bearing. The effects of groove number, angle and depth and bearing clearance on the dynamic stability of the bearing are investigated in terms of the critical mass, and its equilibrium positions, stiffness and damping coefficients are calculated at various rotating speeds. Results have shown that the designed herringbone groove air journal bearing is quite suitable as a support bearing for the considered high-speed color wheel in terms of the complex lubrication performances of the bearing itself.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.649-650
• /
• 2010

This paper construct the sensibility database by extracting sensibility of 28 colors based on 12 color wheel. And, after the large color values are grouped by clustering of input image using k-mean algorithm, sensibility was extracted by matching with color and database. Also, we see the color sensible psychology of child using color distribution of children in painting.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.132-137
• /
• 2003

For the evaluation of acoustic noise of a DLP projector, vibration and sound characteristics of a DLP projector were studied. The acoustic noise of DLP projector could be classified into three categories, that is, the direct noise from a body of rotation, the air-bone noise generated from turbulence or vortex occurred during cooling process and the structural born noise produced by vibrating elements. Cooling fans and color filter wheel which rotates at 9000 rpm are main causes of acoustic noise induced in DLP projector. Since the structure of an optical module in a DLP projector can be excited by the excessive vibration of a color filter wheel, the structural design for anti-vibration should be considered. To make a reduction of overall acoustic noise, the anti-vibration design and the enclosing structure have been studied and applied to a color filter wheel.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.861-867
• /
• 2004

For the evaluation of acoustic noise of a DLP projector, vibration and sound characteristics of a DLP projector were studied. The acoustic noise of DLP projector could be classified into three categories, that is, the direct noise from a body of rotation, the air-bone noise generated from turbulence or vortex occurred during cooling process and the structural born noise produced by vibrating elements. Cooling fans and color filter wheel which rotates at 9000 rpm are main causes of acoustic noise induced in DLP projector. Since the structure of an optical module in a DLP projector can be excited by the excessive vibration of a color filter wheel, the structural design for anti-vibration should be considered. To make a reduction of overall acoustic noise, the anti-vibration design and the enclosing structure have been studied and applied to a color filter wheel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1503-1510
• /
• 2016

In this study, we implemented the emotional light controlling system by using the wheel interface built in the smart-watch devices. Most previous light controlling systems have been adopted the direct switches or smart-phone applications for presenting individual emotion in lighting systems. However, in order to control color properties, these studies have some complicated user-interfaces in systems and limitation to present various color spectrums. Therefore, we need to user-friendly interfaces and functions for controlling properties of the lightning systems such as color, tone, color temperature, brightness, and saturation in detail with the wheel interface built in the smart-watch devices. The system proposed in the study is given to choose the user's selecting the emotional status information for providing the emotional lights. The selectable emotional status such as "stable", "surprise", "tired", "angry", etc. can be among 11 kinds of emotional states. In addition, the designed system processed the user's information such as user's emotional status information, local time, location information.

• Korean Journal of Cognitive Science
• /
• v.26 no.1
• /
• pp.27-51
• /
• 2015

The present study tested the effect of a top-down influence on recalling the colors of Stroop words. Participants remembered the colors of 1, 2, 3 or 6 Stroop words. After 1 second of a memory delay, they were asked to recall the color of a cued Stroop word by selecting out its corresponding color on a color-wheel stimulus. The correct recall was defined when the participants chose a color that was within ${\pm}45^{\circ}$ from the exact location of Stroop word's color on the color-wheel. Otherwise, the recall was defined as incorrect. The analyses of the frequency distribution of the participants' responses in the error trials showed that the probability of choosing the color-name of the target Stroop word was higher than the probability of other five color-names on the color-wheel. Further analyses showed that increasing the number of Stroop words to manipulate memory load did not affect the probability of the Stroop interference. These results indicate that the top-down interference by Stroop manipulation may induce systematic distortion of the stored representation in visual working memory.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.290-293
• /
• 2006

COMS (Communication, Ocean and Meteorological Satellite) shall be operated with two remote sensing payloads, MI (Meteorological Imager) and GOCI (Geostationary Ocean Color Imager). Since both payloads have rotating mechanisms, the dynamic coupling between two payloads is very important considering the pointing stability during GOCI operation. In addition, COMS adopts a single solar wing to improve the image quality, which leads to the unbalanced solar pressure torque in COMS. As a result, the off-loading of the wheel momentum needs to be performed regularly (2 times per day). Since the frequent off-loading could affect MI/GOCI imaging performance, another suboptimal off-loading time needs to be considered to meet the AOCS design requirements of COMS while having margin enough in the number of thruster actuations. In this paper, preliminary analysis results on the pointing stability and the wheel off-loading time selection with respect to MI/GOCI operations are presented.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.2
• /
• pp.19-28
• /
• 2010

In this paper, we proposes a method that analyzes the characteristics and patterns of color juxtaposition based on the color wheel used by pointillism painter and an algorithm that generates pointillistic images by applying obtained analysis data. In order to analyze color juxtaposition of pointillism, we extract the stroke colors of real painting and find the most similar probability density functions(PDFs) through applying good-of-fit tests for the probabilistic distribution of stroke colors. By performing the juxtaposition of color based on the found PDFs, we can convert input image to pointillistic image effectively. It can be seen that this study shows reliability in the use of data obtained from actual paintings and that leads to perform a reasonable work.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.406-413
• /
• 1997

The dyeability and colorfastness of browning extracts from mushroom were investigated. The results of this study are as follows, 1. Browning extracts from mushroom exhibited dyeability to wool, nylon and silk. The wool and silk had the greatest K/S value at pH 4 and nylon at pH 5 2. Furthermore, the increase in K/S value corresponded to temperature, time, and the number of dyeing. 3. In most cases, the value of K/S was increased by mordant treatment. The treatment of pre-mordant caused the increase in K/S value depending on the concentration of mordant, but not in the color. Co.mordant and post-mordant treaments, however, showed various colors of YR, Y, and GY types of Munsell color wheel. 4. In the most cases, color fastness of light, drycleaning, laundry, sweat, rubbing was excellent.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.629-632
• /
• 1999

In this paper, color coordinate system transformation based visual servo controller has been considered. Mobile robot always has a position error and an orientation error resulted from wheel slipping etc.. Even more, the errors have accumulative properties. So feedback from environments is important. In this paper, by using color model faster land mark extraction can be achieved. And the global position and the orientation of mobile robot can be known by only two land marks positions in image coordinate system. Finally, the adoption of visual information in path tracking problem makes visual servo control.