• 동의생리병리학회지
• /
• 제18권2호
• /
• pp.355-358
• /
• 2004

Jang Nam's opinion is that Yin-Yang of pathogenic factors change following to the Yin and Yang of human body. As the pathogenic factors injure the human body, the conditions of diseases become different to the inborn constitution of human. Therefore the main principles of remedy set up the diagnosis on the YINㆍYANG & the strengthㆍweakness of constitution. This diagnotic points are body formal distinction, flesh hardness and softness, face color and form, skin color. Moreover he arranges the 4 type of the hole-body constitution based on the Seop-Gye's the guide of clinical differentiation of syndromes(臨證指南); Yang-Strength and Yin-weakness(陽盛陰虛), Yin ㆍYang-strength(陰陽具盛), Yin-Strength and Yang-weakness(陰盛陽虛), YinㆍYang-weakness(陰陽兩虛).

• 대한가정학회지
• /
• 제45권10호
• /
• pp.73-81
• /
• 2007

The purpose of this study was to increase the ultraviolet-light (UV)-cut ability of cellulose fabrics (cotton, ramie, and rayon) dyed with safflower yellow colorants. For this purpose, samples treated with UV-cut agent and tannic-acid were compared with the untreated samples after UV exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and strength retention. The K/S value rapidly decreased after 28 days exposure, whereas the K/S value of the samples treated with both UV-cut agent and tannic-acid decreased to less than that of the untreated samples. In color changes, $L^*$ increased while $a^*$ and $b^*$ decreased, indicating less red and yellow character in color. This induced a change in the hue, value and chroma values. However the color change(${\Delta}E$) of the samples treated with both UV-cut agent and tannic-acid was less than that of the untreated samples. Scanning electron microscopy (SEM) pictures showed a severe degradation by exposure in all samples. Tensile strength rapidly decreased after 28 days for cotton and rayon, and after 21 days for ramie. However, the strength retention of the samples treated with UV-cut agent and tannic-acid was higher than that of the untreated samples.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.465-468
• /
• 2009

In this study, acid cellulase was used to treat denim fabrics by varying pH, temperature, enzyme concentration, treatment time and non-ionic surfactant (Triton X-100) concentration. Treatment condition was controlled based on the weight loss. The characteristics of enzyme-treated fabrics were measured in terms of tearing strength, stiffness, and color difference. The optimum conditions for cellulase treatment of denim fabric were pH 5.0, $50^{\circ}C$, 3% (o.w.f.), 90minutes. The weight loss did not change significantly with the addition of a non-ionic surfactant, but it improved when more non-ionic surfactant were used. The tearing strength of enzyme-treated denim fabrics did not deteriorate. The stiffness of the treated fabrics improved with the enzymatic treatment with and without the non-ionic surfactant. The difference in color of fabrics treated with enzyme increased.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.189-195
• /
• 2023

In this study, as one of the eco-friendly dyeing methods, indigo, Phellodendron amurense and Caeasapinia sappan were complexed dyed on cotton fabric. For complexed dyeing, the cotton that was pre-dyed 5 times with indigo was dyed 1 ~ 2 times repeatedly with Phellodendron amurense and Caeasapinia sappan. Then the color, tensile strength, density, and color fastness of complexed dyed sample were analyzed and the following analysis results could be obtained. As a result of color difference measurement, the L* value was 22.7 in the sample in which the cotton was dyed 5 times and then the Phellodendron amurense was dyed 1 time, and the K/S value was 15 or higher in all samples. As a result of measuring the strength, cotton fabrics tended to have a slight decrease in tensile strength when complexed dyeing. As a result of measuring the density, the density decreased by 15 ~ 20% in all samples at the warp and increased by 20 ~ 30% in the weft due to the complexed dyeing of cotton fabric. Moreover, the fastness to washing and drycleaning showed good results of 2 ~ 3 or higher, and the light fastness was 4 or higher.

• 복식문화연구
• /
• 제22권3호
• /
• pp.361-370
• /
• 2014

The fabric, 100% Silk, was dyed with Atractylodes japonica extract solution. The effects of concentration of extracts (colorant), temperature of dyeing, time of dyeing and pH of dye bath were studied. As the concentration of extracts increased, color strength (K/S value) increased progressively. The K/S values increased with raising temperature, time and proper conditions were $80^{\circ}C$ and 80 minutes. Maximum K/S value was obtained at pH 3. The K/S values of mordanted fabrics were increased with increasing mordant concentration up to specific values. Surface color of dyed and mordanted fabrics were yellowish. Light color fastness of fabric with mordanting was fairly good 3/4 rating. The mordanted silk fabrics showed excellent antibacterial activity. The silk fabric dyed with Atractylodes japonica extract showed a superior UV protective property.

• 한국의류학회지
• /
• 제9권2호
• /
• pp.13-26
• /
• 1985

In this study, when cotton fabrics dyed with Direct dyes are treated under various resin concentration 2, 4, 8, 12, $14\%$ with ureaformaldehyde(UF) and melamineformaldehyde(MF) resin which can be imparted the crease recovery to textiles, chang of properties on lightfastness, washfastness, crease recovery, breaking strength, etc. and color changes are investigated. the results are as follows 1) Color difference(${\Delta}$E) increased but K/S value decreased according to the increase of resin cone. such tendency showed that MF treated fabrics and soaping fabrics were evident than UF treated fabrics and non-soaping fabrics. 2) In lightfastness, ${\Delta}$E and K/S value of resin treated fabrics were reduced as compared with untreated fabrics according to the increase of resin cone. The lower ${\Delta}$E and K/S value of MF than ${\Delta}$E and K/S value of UF showed low lightfastness of MF. pH of resin treted fabrics was almost unaffected with lightfastness. 3) In washfastness, ${\Delta}$E and K/S value of resin treated fabrics decreased slightly as com-pared with untreated fabricsaccording tothe increase of resin cone. The ${\Delta}$E and K/S value of MF decreased lower than UF. But in the case of the higher resin cone. than about $8\%$, they were not almost differentiated. 4) As resin cone. increased, crease recovery considerably increased but breaking strength and elongation decreased. The fabrics treated with UF were good crease recovery, whereas the fabrics treated with MF were good breaking strength. 5) Soaping appeared to improve the lightfastness, washfastness, crease recovery but appeared to work adverse effect on breaking strength.

• 한국의류산업학회지
• /
• 제10권2호
• /
• pp.249-253
• /
• 2008

The purpose of this study was to investigate the properties changes of wool fabrics dyed with safflower red and yellow colorants under Ultraviolet(UV)-light. For this purpose, the wool fabrics dyed with safflower red and yellow colorants were compared with each other after uv-light exposure in terms of K/S value, color changes(${\Delta}E$), morphology, and strength retention. K/S value rapidly decreased with increasing exposure time, but K/S value of the samples dyed with safflower yellow colorants decreased less than that of the samples dyed with safflower red colorants. In color changes, as increasing exposure time, $L^*$ and $b^*$ increased, $a^*$ decreased, and thereby ${\Delta}E$ increased in the samples dyed with safflower red colorants, $L^*$ increased, $a^*$ and $b^*$ decreased, and so ${\Delta}E$ increased in the samples dyed with safflower yellow colorants, indicating fading away by uv-light and changes of hue, value and chroma value. But the color change of samples dyed with safflower yellow colorants was less than that of samples dyed with safflower red colorants. SEM pictures showed a severe degradation by uv exposure, regardless of colorants type. Tensile strength slowly decreased until 14 days, and rapidly decreased until 21 days and slowly decreased. Strength retention of the samples dyed with safflower yellow colorants was higher than that of the samples dyed with safflower red colorants.

• International Journal of Concrete Structures and Materials
• /
• 제7권2호
• /
• pp.111-117
• /
• 2013

Heavy oil fly ash (HOFA) is a byproduct generated by the burning of heavy fuel oil. Chemical analysis showed that HOFA is mainly composed of unburned carbon with a significant amount of heavy metals. Due to toxicity, management of this waste poses a challenge to the industry personal. The present study investigates the possible use of HOFA as a black pigment or admixture in cement mortar aiming to produce ornamental brick. In order to investigate the change of cement mortar strength when HOFA is added, the standard compressive strength test with 50 mm cubes was performed. The results showed that the addition of 2-5 % of HOFA in cement mortar does not affect its strength. The leaching behavior of trace elements within HOFA and HOFA mixed mortar were investigated through laboratory batch leaching experiments. The results confirmed that HOFA can be utilized as a black pigment in ornamental brick, which is environmentally safe and provides good balance between color and brick properties.

• 대한가정학회지
• /
• 제46권9호
• /
• pp.1-6
• /
• 2008

홍화 황색소와 홍색소로 염색을 한 나일론 직물에 자외선을 조사 한 후 시료들의 염착량과 색채변화, 표면 특성 변화와 인장 강도 변화를 측정한 결과는 다음과 같다. 1. 색소의 종류에 상관없이 자외선 조사시간 증가에 따라 염착량이 감소되었다 그러나 홍색 소보다는 황색소로 염색한 시료들의 자외선 조사 28일 후의 염착량 보유율이 더욱 낮았다. 2. 색채변화의 경우, 황색소로 염색한 시료들은 $L^*$은 증가하고 $a^*$와 $b^*$는 감소하였으며, H/VC, ${\Delta}E$등 색채 전반에 퇴색이 나타났다. 홍색소로 염색한 시료들 도 자외선 조사 시간 증가에 따라 $L^*$은 증가하고 $a^*$는 감소하였으며, $b^*$는 증가하였고, H/VC, ${\Delta}E$등 색채 전반에 퇴색이 나타났다. 그러나 홍색소와 황색 소로 염색한 나일론 직물 시료의 조사 28일 후의 색차는 황색소가 더욱 낮아 나일론 직물에는 황색소가 자외선에 대한 견뢰도가 더욱 높은 것으로 보인다. 3. 자외선 조사 시간에 따른 표면 특성 변화의 결과, 색소의 종류와 상관없이 조사 28일 후 모든 시료들에서 심한 손상을 관찰할 수 있었다. 4. 자외선 조사 시간에 따른 인장 강도 변화 결과, 모든 종류의 시료에서 자외선 조사 시간 증가에 따른 강도의 손실을 알 수 있었다. 그러나 홍색소보다는 황 색소로 염색한 나일론 직물 시료들의 인장 강도 보유율이 상대적으로 높은 것으로 나타났다.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.10-20
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional fresh juice extract dyeing. Three kinds of leaf powder colorants were prepared by freeze drying method with or without deep freezing as pre-treatment: one powder colorant from fresh leaf juice with deep freezing; two kinds of powder colorant from fresh leaves with and without deep freezing. Their dyeing properties and storage stabilities were studied and compared with the traditional fresh juice extract dyeing. The presence of indigo in the powder colorants was confirmed by UV/Visible absorption spectra. They showed absorption peak at 602nm which was same with indigo absorption peak. Dyeing was done at low temperature around 6$^{\circ}C$. All three powder colorants produced B colors on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants from leaves gave higher color strength than the powder from leaf juice. The powder colorant prepared from leaves with deep freezing was the most stable for long term storage as its color and color strength were not changed after 360 days. So, this was used for further dyeing to study the effects of concentration and repeat dyeing on color strength and colorfastness. Fastnesses to dry cleaning and rubbing were fairly good above 4 rating. Further study is needed to improve light fastness. It was concluded that the leaf powder colorant with deep freezing could be used as a substitute for traditional juice extract dyeing at all seasons.