• 한국축산식품학회지
• /
• 제43권4호
• /
• pp.580-593
• /
• 2023

The purpose of this study was to analyze whether seawater has positive effects on appearance characteristics, such as CIE a^*, and to determine the gas composition concentration that is suitable for maintaining it. Pork hind meat was cured with four types of curing agent for 5 d at 4℃. The different curing agents comprised the control salt, control nitrite pickling salt (CN), treatment brine, and treatment bittern (BT). The cured hams were cooked at 65℃ for 4 h and packaged at O₂:N₂ gas ratios of 7:3, 8:2, and 9:1 for 3 wk. The physicochemical properties were assessed immediately after heating the sample, and the color properties were measured after a 3 wk storage period. Based on the correlation results of the physicochemical properties, BT had a higher curing and cooking yield than the other treatments, owing to its high salinity. Results of color properties for BT (7:3) and CN (8:2) showed similar color CIE L^*, CIE a^* chroma, and hue angle values. Therefore, BT can be said to be a sous-vide curing agent suitable for preserving the color of ham, and a high nitrogen concentration of 30% helps to maintain the appearance of seawater sous-vide ham.

• 한국인쇄학회지
• /
• 제16권1호
• /
• pp.13-24
• /
• 1998

The color difference caused by the overprinting sequence of ink in multicolor printing is due to both trapping and optical properties of ink layers. Hence the effect of optical properties only cannot be analyzed without removing the effect of ink trapping This study was carrier out for the purpose of analyzing optically the color difference caused by only the optical properties of ink under the various printing sequence. The present optical analysis for overprints showed a good agreement with the experimental result. It is expected that this study may contribute to decreasing the color difference between the original and the printed reproduction in multi-color printing.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.1-6
• /
• 2009

Due to the different camera properties of the multi-view camera system, the color properties of captured images can be inconsistent. This inconsistency makes post-processing such as depth estimation, view synthesis and compression difficult. In this paper, the method to correct the different color properties of multi-view images is proposed. We utilize a gray gradient bar on a display device to extract the color sensitivity property of the camera and calculate a look-up table based on the sensitivity property. The colors in the target image are converted by mapping technique referring to the look-up table. Proposed algorithm shows the good subjective results and reduces the mean absolute error among the color values of multi-view images by 72% on average in experimental results.

• 한국염색가공학회지
• /
• 제15권1호
• /
• pp.39-47
• /
• 2003

Phosphorescent PET/liquid color films and phosphorescent PET/disperse dyes films were prepared by melt casting method using Hot press. Then, weight ratios and exhaustion percent of films were 0.7, 1.2, 1.5, 2.0, and 2.3 wt.%. The effects of L/C and D/D contents(wt.%) of films on the thermal properties, crystal structure, H(%), brightness$(mcd/mm^2)$, morphology, and tensile properties were investigated by means of DSC and WAXD, etc. It was found that the melting temperature and crystalline diffraction peaks were not changes with increasing the liquid color contents and disperse dyes exhaustion. Also, in case of using liquid color to phosphorescent PET film, the H(%) and brightness$(mcd/mm^2)$ value were superior to phos.PET/disperse dyes film. The tensile strength and the tensile modulus were decreased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film. Also, the elongation at break was increased with increasing the contents of liquid color and exhaustion of disperse dyes in the phosphorescent PET film.

• 펄프종이기술
• /
• 제34권4호
• /
• pp.44-50
• /
• 2002

This research was performed to investigate the physical properties and color appearance of Hanji manufactured using bast fibers dyed separately by two reactive dyes with different colors. The breaking length of color Ha was above 7 km. The fastness was five grade; the use of reactive dyes made the color of the Hanji not to be faded away. The Hanji manufactured by mixing uniformly two types of bast fibers separately dyed showed the mixed color of two different colors. However, the shives showed their original colors, resulted in irregular color patterns all over the sheets. The color of color Hanji with different colors in the front and back side of sheets showed color difference between front and back side of the sheets. Accordingly, the color of the sheet has a reflection from the backside, resulted in Pink. The colors of the Hanji appeared in this study could not be found from the Hanji manufactured by traditional methods.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.150-154
• /
• 2000

Coloring admixture is used for take color inside and outside of mortar and concrete, differently form pigment and spray paint take color limited surface. In our country, Using the coloring admixture is very slight and regulation is not yet about it. But that is expected the increase with raising the standard of living. Especially it is used to civil structure like dam and seawall for the environment harmony. Then we observe, in this experiment, the effect of coloring admixture on the material properties of color concrete and propose the suitable mix-proportion of color concrete.

• 보존과학연구
• /
• 통권17호
• /
• pp.48-64
• /
• 1996

We compared the degree of color difference formed by environmental factor(temperature, relative humidity) with fungal growth in order to know how to change the color difference of cellulolutic cultural properties such as Korean papers, cotton, jute and hemp. We concluded, from the result, that the action of fungal growth on celluloytic cultural properties was more hamful than environmental factor. We considered the secretion produced by fungi as the causative agent for stained formation on cellulolytic cultural properties. Alternaria sp. colored allmaterials greyish black, Chaetomium sp. colored cotton and hemp orange, and Penicllium sp. colored cotton, jute and hemp yellowish green. But Trichoderma sp. and Aspergillus sp. didn't show a clear color against each material. It was observed that thymol(120g/$m^3$) was the most effective fungicide to prevent fungal growth.

• Journal of Ceramic Processing Research
• /
• 제20권1호
• /
• pp.30-34
• /
• 2019

Copper (Cu)-incorporated silica aerogel was synthesized by a sol-gel process with two-step drying process for color modification. The microstructure of the silica aerogel was not affected significantly by the Cu concentration and an amorphous structure was maintained without any crystalline impurity phases. The textural properties of the silica aerogels investigated by using N2 adsorption-desorption isotherms exhibited the typical features of mesoporous materials. The pore size and porosity were not changed significantly even with the incorporation of Cu up to 1.5 M, which indicates negligible variation of thermal insulating properties. However, the color of the aerogel changed from white and light greenish to dark greenish with increasing Cu content. The color change of the silica aerogel was due to the modification of the electron energy band structure of silica by the Cu atomic levels. Therefore, the color of the silica aerogel powders could be manipulated by incorporating Cu without degrading the thermal insulating properties.

• 펄프종이기술
• /
• 제44권5호
• /
• pp.46-53
• /
• 2012

The purpose of this study was to investigate the functional properties of Changhoji with natural dyeing. This research would provide a basic information for interior material Changhoji. To estimate functional properties of super eight colors Changhoji, water staining, lightfastness, and floodlight color test were executed. In term of the water staining test, blue color showed the clear and other colors showed the little spot. As a result of measuring the lightfastness, Magenta color dyed with sappanwood showed the worst. But blue color dyed with indigo and Turquoise color dyed with indigo and Pagoda tree flower showed the highest. As a result of floodlight color test was no difference between sample color and floodlight color.

• 감성과학
• /
• 제21권1호
• /
• pp.143-154
• /
• 2018

본 연구는 친환경적이고 감성적인 패션상품의 색채기획을 위한 자료를 제공하고자 수행되었다. 쪽과 괴화로 복합염색 후 무매염 견직물과 4종의 매염제(Al, Cu, Fe, Zn)를 처리한 견직물에 대하여 색채특성을 측정하였다. 또한 복합염색 후 매염처리된 연두색 견직물에 대하여 여대생을 대상으로 색채감성과 색채 선호도를 조사하였으며, 색채특성과 색채감성이 색채 선호도에 미치는 영향을 분석하였다. 쪽/괴화로 복합염색된(무매염) 견직물은 선 염색한 쪽 농도가 $10g/{\ell}$이면 녹색, 쪽 $20g/{\ell}$을 사용하면 청록색을 나타내었으며, 4종의 매염제를 사용하여 처리시 거의 모든 경우 연두색을 나타내었다. 연두색을 나타내는 복합염색된 견직물 10종의 색채감성을 요인분석한 결과, 유쾌성, 품위성, 편안성 요인으로 분류되었으며, 이러한 색채감성은 쪽 농도와 매염제의 종류에 따라 대부분 유의한 차이를 보였다. 또한 복합염색된 연두색 견직물의 색채특성과 색채감성요인 간에는 대부분 유의한 상관성을 보여, $L^*$값, $b^*$값, $C^*$값이 크고 $a^*$값이 작을수록 유쾌성과 편안성 감성을 더 강하게 느끼며, $L^*$값이 작고 $a^*$값이 클수록 품위성 감성을 더욱 느끼는 것으로 나타났다. 따라서 쪽과 괴화로 복합염색하고 매염처리한 연두색 견직물의 색채감성요인을 예측변수로 활용할 수 있는 색채 선호도 예측 회귀식이 제안되었다.