• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.149-156
• /
• 2022

In this paper, it was attempted to form a titanium (Ti: Titanium) thin film using the atmospheric pressure plasma process technology for the conductor, which is the main component of the optical sensor. The atmospheric plasma equipment was remodeled. A 4-inch Ti target for sputter was etched using CF4 gas, and the by-product was coated on a glass sample. These by-products were formed up to about 2 cm, and could be divided into 15 areas according to color. Surface shape and constituent elements were analyzed using scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS), respectively. Electrical properties using 4-point probe equipment were also measured. If the process is performed by positioning the sample at about 4.5 mm to 5 mm from the target, a uniform Ti thin film will be deposited. However, it was found that the thin film contained a significant amount of fluorine, which greatly affects the electrical properties of the thin film. Therefore, additional experiments and studies should be performed to remove or minimize fluorine during deposition.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.514-523
• /
• 2004

Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.19-30
• /
• 2000

LaF, KzFS1, LBO glass were manufactured successfully by using platinum crucible in LaF and using clay crucible in the KzFS1 and LBO. There was optically transparent and the refractive indexes were measured by minum deviation method of prism. LaF, KzFS1, LBO show that the refrective indexes are $n_d$ = 1.770 in LaF, $n_d$ = 1.603 in KzFS1, $n_d$ = 1.560 in LBO. The transmittance were obtained that LaF has 85%, and KzFS1 has 83% and LBO has 89% in visible range. These glasses have no any absorption spectrum under visible range. Therefore it has no any color.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.287-295
• /
• 2002

Statement of Problem. Endodontically treated teeth frequently required posts and cores to provide retention and resistance form for crowns. In spite of excellent mechanical properties of metal post and core, its metallic color can be detected through all ceramic restorations occasionally. To solve esthetic problems of metal post and core zirconia post system has been introduced recently. Purpose. The purpose of this study was to examine the fracture strength and mode of resin root analogs restored with zirconia, gold and titanium posts with resin, ceramic and metal cores after cementation with metal crowns. Materials and methods. To avoid the morphological variations of natural teeth, 40 root analogs were fabricated with composite resin. Forty resin root analogs were randomly assigned to four groups according to post and core materials: Group A: cast gold post and core and complete cast crowns, as control. Group B: titanium posts (Parapost, Coltent/Whaledent Inc., NJ, USA) and composite resin cores. Group C: zirconia posts (Cosmopost, Ivoclar AG, Schaan/Liechtenstein) and composite resin cores Group D: zirconia posts and heat-pressed ceramic cores (IPS Empress Cosmo Ingots, Ivoclar AG) After thermocycling ($5^{\circ}C{\sim}55^{\circ}C$, 30 sec.), cyclic loading was applied at 3mm below the incisal edge on the palatal surfaces at an angle of 135 degree to the long axis (2Hz, 50N, 50000cycles). Fracture strength was measured by universal testing machine (Instron, High Wycombe, UK) and fracture pattern of restored resin root analogs was also evaluated. Results and conclusion. Within the limitations of this study following results were drawn. 1. Resin root analogs restored with zirconia posts and composite resins demonstrated lowest fracture strength among tested groups. 2. There was no significant difference in the fracture strength between zirconia posts and heat pressed glass ceramic cores and cast gold posts and cores 3. The fracture strength of resin root analogs restored with titanium posts and composite resin cores was lower than that of gold posts and cores. 4. The deep oblique fracture lines were dominantly observed in root analogs restored with cast gold post and core and zirconia post and heat-pressed ceramic core groups.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.6 no.1
• /
• pp.31-36
• /
• 2000

180g of fermented soy paste and 150g of red pepper paste were packaged in glass jars of 232 mL with different conditions of active packaging and then stored at $13^{\circ}C$ for about 170 and 128 days, respectively. During the storage, package atmosphere, surface color, pH, acidity and microbial flora were monitored to see the effect of packaging conditions. Test packaging conditions include package equipped with $Ca(OH)_2\;as\;CO_2$ absorber, package with pinhole and closed control one. Closed control packages of soypaste and red pepper paste showed the increased $CO_2$ partial pressure, the decreased $O_2$ partial pressure and the constant $N_2$ partial pressure to produce high pressure buildup with storage. The paste packages with $Ca(OH)_2$ maintained relatively low $CO_2$ partial pressure and thus the package pressure close to normal atmospheric pressure for initial storage period of 70 days. The packages with air pinhole channel had the partial pressures of $O_2\;and\;N_2$ decreased with storage time, while $CO_2$ partial pressure first increased to a maximum and then slowly decreased thereafter Without any pressure increase the packages with pinhole gave the lowest quality changes possibly due to the effect of package atmosphere, but it had problem of mold contamination and growth for soy paste after 120 days. There were no difference in microbial flora between the packages after about 70 day storage.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.1-18
• /
• 1996

There are many advantages when using IIF and DNA probe methods over anaerobic culture method in that they are time-and effort-saving, more precise and more sensitive. Furthermore, in IIF and DNA probe methods, the detection is possible only with small amount of bacteria, the quantitative analysis is possible, and the cell viability is not necessary. The purpose of this study is to observe the incidence of P.endodontalis by carrying out anaerobic culture, IIF and colony lift using DNA probe method respectively, and to compare these 3 methods in terms of effectiveness and sensitivity in order to identify the most effective detection method. 30 teeth with at least one clinical symptoms, with single canal, and with pulp necrosis were sampled. For sampling bacteria, access cavity was prepared after disinfecting tooth and its surroundings. Then the paper point was inserted up to the periapical area, leave there for a while, and finally it was placed into PRAS Ringer's sol. and PBS sol. In anaerobic culture method, P.endodontalis was identified by biochemical tests after subculturing black and brown colonies which were produced after 7 days of incubation on BAP and Brucella BAP in anaerobic chamber. To identify P.endodontalis in IIF method, species-specific polyclonal rabbit-antisera of P.endodontalis(ATCC 35406) was reacted with sampled PBS sol. dispensed onto glass slide, and then P.endodontalis was examined by phase contrast microscopy after incubating with Goat anti-rabbit lgG conjugated to Fluorescein isothiocyanate. For colony lift using DNA probe method, membranes were laid over colonies on the surface of BAP and were hybridized with cloned DNA probe of P.endodontalis. The existence of P.endodontalis was then identified by the methods of chemiluminescent detection and color metric detection. Black colony was found in 11 teeth out of 30 teeth and P.endodontalis was detected in 6 teeth (20 %) by anaerobic culture method, 16 teeth (53 %) by IIF method, and 7 teeth (23 %) by DNA probe method. IIF method is significantly better in detecting P.endodontalis than DNA probe method and anaerobic culture method. There was no significant differences between DNA probe method and anaerobic culture method. There was significant correlation between the formation of black colony and the existence of P.endodontalis. The probability of detecting P.endodontalis when black colony being present is 2.89 times higher than when not being present. There was significant relationship between the foul odor of clinical symptoms and P.endodontalis. The sensitivity of existing P.endodontalis when foul odor being present was 93.75 %, while the specificity of not existing P.endodontalis when foul odor not being present was 28.57 %. These results suggested that the probes of P.endodontalis will be used to decide the method and prognosis in endodontic treatments.

• Journal of the Korean Society of Food Culture
• /
• v.7 no.4
• /
• pp.297-301
• /
• 1992

To investigate effects of the surface finishing methods (A : conventional press stone, B : enclosing in polyethylene (PE) bag, C : press-tone wrapped with PE film and D : covered with Chinese cabbage leaves 4cm in thickness on Kimchi) on Kimchi quality, pH-values, redness, film forming yeast growth, hardness and sensory quality of Kimchi during storage (for 60 days, at $10{\pm}5^{\circ}C$) in glass vessel $(11{\times}30cm)$ were investigated. pH of the top layer of A, C and D sample were higher than the optimum pH (4.2) of Kimchi, film forming yeast occurred on the surface of Kimchi, color of top layer Kimchi juice was darkened, and panel score of freshness and firmness was significantly worse (p<0.01) than that of sample B. However, in the case of Kimchi stored in PE bag (B), film forming yeast were can't detected visually in the surface of Kimchi, pH values were low as good quality Kimchi, freshness and firmness panel scores and hardness were significantly better (p<0.01) than A, C and D, and redness of juice of top layer of B was also preserved clearly for 60 days. Accordingly among the four surface finishing methods, the B-method was most effective in preserving of y of Kimchi.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1371-1380
• /
• 2007

Study on the instability of waste plastic's thermal pyrolysis oil was carried out for the purpose of improving its quality. The reaction of pyrolysis oil with ozone changed double bonds into aldehydes and ketone, estimated that HDPE pyrolysis oil contained $\sim45$ wt% 1-alkene type olefins, and PP pyrolysis oil did $\sim73$ wt% olefins, which consisted of $\sim47$ wt% secondary and $\sim20$ wt% primary alkenes. The dark brown color and odor of pyrolysis oil were improved by eliminating double bonds, indicated that they were directly related to unsaturated hydrocarbons. Container test showed that metal can affected oil quality worse than the brown glass bottle. Antioxidant added into pyrolysis oil was consumed up to 90% within $2\sim3$ days and the wt. composition of unsaturated hydrocarbons in pyrolysis oil was not changed within 50 days, inferring that instability of pyrolysis oil due to unsaturated bonds can be stabilized by antioxidants. Adsorption test on silica gel, activated carbon and alumina to remove precipitates in oil produced a good result, but not enough to remove moisture. However, cheap anhydrous sodium carbonate showed the best removal efficiency of moisture as well as precipitates in oil. Therefore the pyrolysis oil quality improvement was accomplished by applying anhydrous $Na_2CO_3$ into the production plant.

• Journal of the Korean Chemical Society
• /
• v.25 no.4
• /
• pp.275-282
• /
• 1981

A simple semiquantitative procedure was developed for the determination of sub-ppm level of chromium(VI) in aquatic samples by using an analytical micro-column packed with diphenylcarbazide(DPC) gel beads. DPC gel beads were prepared by swelling XAD-2 resin(115∼150 mesh in dry condition) in ethanol for 10min, packing into a glass column(1.5 mm bore, 65nm length) and adsorbing 1ml of ethanol solution of $2{\times}10^{-3}M$ DPC for 20min at room temperature. When 0.5ml of ethanol solution containing chromium(VI) was passed through the DPC gel column for 40min, the original white color of the reagent gel turned to red-violet from the up-stream of the column. As the length of colored band was proportional to the total amount of chromium(VI) in the sample solution passed through the column, the concentration of chromium(VI) could be determined from the calibration line which had been prepared by using the standard solution. Chromium(VI) ion as small as from 0.1 to 0.8 ppm could be determined with ${\pm}5{\sim}{\pm}15{\%}$ relative errors. Since other interfering cations were few, 100-fold excess of Fe(III), 50-fold excess of Cu(II) could be masked with EDTA. This method was successfully applied to the analysis of chromium(VI) in industrial effluents.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.5
• /
• pp.255-264
• /
• 2013

Cobalt aluminate ($CoAl_2O_4$) is a highly stable pigment with excellent resistance to light, weather, etc., which has resulted in widespread use as a ceramic pigment. Due to the unique optical characteristics, $CoAl_2O_4$ is generally used as a coloring agent to decorate porcelain products, glass, paints and plastics. Here, $CoAl_2O_4$ pigments were synthesized by polymerized complex method and solid state reaction. Then $CoAl_2O_4$ pigment were grinded using the attrition milling with 1 mm size zirconia ball for 3 hours. The attrition milling process was performed at the constant speed of 800 rpm and ball to powder weight ratio (BPR) was 100 : 1. The characteristics of synthesized pigment were analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), particle size analyser (PSA) and CIE $L^*a^*b^*$. The XRD patterns of $CoAl_2O_4$ show single phase spinel structure. The particle size of $CoAl_2O_4$ measured by FE-SEM, TEM and PSA analysis was in the range of 100~200 nm. The blue color of obtained $CoAl_2O_4$ pigments could be confirmed through CIE $L^*a^*b^*$ measurement.