• 한국ITS학회 논문지
• /
• 제19권6호
• /
• pp.37-48
• /
• 2020

도로교통법 시행규칙과 단체표준에서 정하고 있는 8가지 색상에 대해 건조 시와 습윤 시의 최소재귀반사성능 기준 확보를 위한 현장실험을 실시하였으며, 백색 건조 시에는 260.8(mcd/㎡·lux), 습윤 시에는 154.6(mcd/㎡·lux)으로 결과가 산출되었다. 황색의 경우는 건조 시 백색의 반사성능 대비 황색, 가호1호에서는 67%, 가호2호에서는 63% 수준이다. 습윤 시는 각각 79%와 59% 수준으로 나타났다. 청색의 경우에는 백색대비 가호1호에서는 64% 수준이며, 가호2호에서는 72%이다. 습윤 시는 각각 63%와 72% 수준으로 나타났다. 습윤 시의 반사성능 변화 폭이 건조 시보다 높으며, 유리알이 없는 경우도 이전의 결과와 비슷하게 나타났다. 신규색상이 적색, 주황색, 분홍색, 연한 녹색, 녹색의 경우에도 백색 대비 50% 이상의 기준값을 가지는 것으로 분석되었으며 이를 토대로 도로교통법 시행규칙에 노면표시 색상에 따른 최소반사성능 기준 마련의 토대가 될 것으로 판단된다.

• 교육녹색환경연구
• /
• 제16권2호
• /
• pp.54-63
• /
• 2017

건물에너지 자립과 온실가스 배출 저감에 BIPV 역할이 증대되는 가운데 기존 결정계의 한계를 극복할 수 있는 DSC의 적용이 주목받고 있다. 특히 DSC의 다양한 색상과 투명성 그리고 방향에 무관한 작동성은 모듈의 다기능 복합재로서 BIPV폭을 크게 확장시킨다. 이에 사례조사 분석을 통해 DSC BIPV의 가능성을 살펴보고 그 활용성을 조망한다. 국 내외 각 3건씩의 사례 조사 분석을 통해 나타난 대부분의 DSC BIPV는 주로 창호와 차양 장치로 구현되고 있고 이는 DSC의 특성과 무관치 않다. 즉, 다양한 색상과 투명성의 모듈은 건물 외피디자인과 에너지 획득에 커다란 전환점을 마련하고 있는 것으로 파악된다. 한편으로는 적용모듈의 색상으로 인한 눈의 자극성이 존재하여 BIPV 창호적용에는 건물 및 실의 용도에 따른 색감 고려가 필수적이고 건물외피 적용을 위한 유연한 모듈개발의 경우 DSC BIPV는 상당히 기대되는 확산성을 가질 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.309-310
• /
• 2005

In the fabrication of high performance red organic light emitting diode, 2-TNA TA [4,4',4" -tris (2-naphthylphenyl- phenylamino)-triphenylamine] as hole injection material and N PH [N,N'-bis (1-naphthyl) -N,N' -diphenyl-1, 1'-biphenyl-4,4'- diamine] as hole transport material were deposited on the ITO (indium tin oxide)/glass substrate by vacuum evaporation, And then, red color emission layer was deposited using Alq3 as a host material and Rubrene (5,6,11,12- tetraphenylnaphthacene) and GDI 4234 as dopants. Finally, small molecular weight OLED with the structure of ITO/2-TNATA/ NPB/Alq3+Rubrene+GDI4234/Alq3/LiF/Al was obtained by in-situ deposition of Alq3, LiF and Al as electron transport material, electron injection material and cathode. respectively. Green OLED fabricated in our experiments showed the color coordinate of CIE(0.65,0.35) and the maximum luminescence efficiency of 2.1 lm/W at 7 V with the peak emission wavelength of 632 nm.

• 한국재료학회지
• /
• 제16권4호
• /
• pp.253-256
• /
• 2006

The blue emitting OLEDs using GDI host-dopant phosphors have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4'-tris(2-naphthylphenyl-phenylamino)- triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium thin oxide)/glass substrate by vacuum evaporation. And then, blue color emission layer was deposited using GDI602 as a host material and GDI691 as a dopant. Finally, small molecule OLEDs with structure of ITO/2-TNATA/NPB/GDI602:GDI691/Alq3/LiF/Al were obtained by in-situ deposition of Alq3, LiF and Al as the electron transport material, electron injection material and cathode, respectively. Blue OLEDs fabricated in our experiments showed the color coordinate of CIE(0.14, 0.16) and the maximum power efficiency of 1.1 lm/W at 11 V with the peak emission wavelength of 464 nm.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.370-374
• /
• 2014

Inorganic pigments have high thermal stability and chemical resistance at high temperature. For these reasons, they are used in clay, paints, plastic, polymers, colored glass and ceramics. $CoAl_2O_4$ nano-powder was synthesized by reverse-micelle processing the mixed precursor(consisting of $Co(NO_3)_2$ and $Al(NO_3)_3$). The $CoAl_2O_4$ was prepared by mixing an aqueous solution at a Co:Al molar ratio of 1:2. The average particle size, and the particle-size distribution, of the powders synthesized by heat treatment (at 900; 1,000; 1,100; and $1,200^{\circ}C$ for 2h) were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized nano-particles increased with increasing water-to-surfactant molar ratio. The synthesized $CoAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), field-emission scanning electron microscopy(FE-SEM) and color spectrophotometry. The intensity of X-ray diffraction of the synthesized $CoAl_2O_4$ powder, increased with increasing heating temperature. As the heating temperature increased, crystal-size of the synthesized powder particles increased. As the R-value(water/surfactant) and heating temperature increased, the color of the inorganic pigments changed from dark blue-green to cerulean blue.

• 한국임상약학회지
• /
• 제8권1호
• /
• pp.59-67
• /
• 1998

The stability of cytarabine (manufactured by two pharmaceutical companies) in intravenous admixture and in plastic syringe was investigated. The admixures containing cytarabine 0.35, 8.6, and 17.1 mg/ml in $0.9\%\;NaCl\;or\;5\%$ D5W were placed in PVC bags or glass bottles, and the reconstituted cytarabine (50 mg/ml) was placed in plastic syringe. One ml aliquots were withdrawn immediately after each preparation and stored at $4^{\circ}C\;or\;24^{\circ}C$ for 1, 2, 4, 6, 8, 10, and 14 days unprotected from light. Each sample was tested for pH and visually inspected for precipitation and change in color. Cytarabine concentrations were measured using high-performance liquid chromatography. Neither precipitation nor change in color was noted, and there were no change in pH during 14 days of testing. The changes in cytarabine concentrations were less than $10\%$. In conclusion, cytarabine in IV admixture or plastic syringe was stable for at least 14 days at $4^{\circ}C\;and\;24^{\circ}C.$(Kor. J. Clin. Pharm. 1998; 8(1): 59-67)

• 센서학회지
• /
• 제24권2호
• /
• pp.113-118
• /
• 2015

Intravenous (IV) infusion set is one of the most common treatment methods applied to hospitalized patients. However, it is necessary to check the injection of IV solution in order to prevent patients from any possible medical injuries. In this paper, using the optical sensors to detect exhaustion of IV solution was proposed. The optical sensor is coplanar structure composed of LED and photodiode which is installed according to focal distance of the lens. These two elements detect exhaustion of IV solution at the desired point conveniently. Through the results of experiments using various wavelength of LED (R.G.B), the blue LED was selected to the optimum light source. The suggested optical sensor can detect exhaustion of IV solution by the differences in the amount of light which is caused by properties such as total reflection, refractive index and scattering. From the implementation, the detector is applicable to both containers of IV solution, glass bottle and plastic pack. And also the result shows apparent differences according to existence of IV solution even if the IV solution color and illumination were changed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.448-449
• /
• 2006

For the possible applicative pearl pigment, multi-layered $TiO_2/Al/TiO_2$, $TiO_2/Cr/TiO_2$ thin film was deposited on glass substrate by using sputtering method. $TiO_2$ and Al or Cr was selected as a possible high and low refraction materials at the film interface respectively. Optical properties including color effect were systematically studied in terms of different film thickness and film layers by using spectrometer. In order to expect the experimental results, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. The film consisting of $TiO_2/Al/TiO_2$, $TiO_2/Cr/TiO_2$ layers show the wavelength range of 430 - 760nm, typically color ranges between bluish purple and red. It was confirmed that this experimental result was quite well matched with the experimental one.

• 한국재료학회지
• /
• 제31권3호
• /
• pp.132-138
• /
• 2021

Electrochromic devices (ECDs) have been drawing great attention due to their high color contrast, low power consumption, and memory effect, and can be used in smart windows, automatic dimming mirrors, and information display devices. As with other electronic devices such as LEDs (light emitting diodes), solar cells, and transistors, the mechanical flexibility of ECDs is one of the most important issue for their potential applications. In this paper, we report on flexible ECDs (f-ECDs) fabricated using an all-in-one EC gel, which is a mixture of electrolyte and EC material. The f-ECDs are compared with rigid ECDs (r-ECDs) on ITO glass substrate in terms of color contrast, coloration efficiency, and switching speed. It is confirmed that the f-ECDs embedding all-in-one gel show strong blue absorption and have competitive EC performance. Repetitive bending tests show a degradation of electrochromic performance, which must be improved using an optimized device fabrication process.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.