• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.423-428
• /
• 1999

Potato starches were hydroxypropylated with 2.5, 5.0, 7.5, and 10.0% propylene oxide(PO) to improve mechanical properties of starch polyethylene film. Starch polyethylene cast films were prepared that contained 5% or 10% of the hydroxypropylated potato starch. Mechanical properties of these films were measured and compared to those of the films containing native potato starch. DS(degree of substitution) increased proportionally as propylene oxide concentration increased. Relative crystallinity in X ray diffraction patterns was decreased and starch granule observed by scanning electron micro scopy was destroyed by severe hydroxypropylation. In color properties of films, b value was not significantly different in the films but 5% starch polyethylene films with 2.5 PO starch showed the lowest L and a value. Tensile strength and strain energy of the films except the film containing 10.0 PO starch were higher than those of the containing native starch.

• Korean Journal of Food Science and Technology
• /
• v.29 no.6
• /
• pp.1184-1190
• /
• 1997

Corn zein coated carrageenan films were manufactured by immersing preformed ${\kappa}-carrageenan$ films into solution of different concentrations of corn zein (CZ) solids (10, 20, and 30% in 95% ethyl alcohol) with polyethylene glycol (20% w/w of CZ), glycerol (24% w/w of CZ). For all types of films, water vapor permeability (WVP), water solubility (WS), swelling ratio (SR), tensile strength (TS), percent elongation at break (E), heat sealing strength (HS), and Hunter color values (L, a, and b) were determined. WVP of corn zein coated ${\kappa}-carrageenan$ films decreased significantly (p<0.05) as the concentration of com zein increase. Coating with corn zein also decreased film WS and SR linearly with the concentration of corn zein. TS of corn zein coated carrageenan films decreased linearly with corn zein concentration. All the com rein coated carrageenan films showed heat sealing properties even though their sealing strength was less than half of corn zein film. Obviously corn zein coating affected color of ${\kappa}-carrageenan$ films, which was mainly caused by increase in yellowness (Hunter b-value).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.1
• /
• pp.151-160
• /
• 2012

The Purpose of this study is to examine the inner symbolic meaning of the revenge movies, forcing on , , by producer Chan-Wook Park. This study was analyzed with theoretical frames of Greimas's and Lacan's desire theory. The results of this study is as follows: Main characters of these films were tangled each their with love, desire, angry, hate and revenge. They also had desires and needs of revenge caused by deficiency. These films represented blue as sorrow, depression, frigidness, loneliness and deficiency, red as love, desire, angry, hate and revenge, black as strong will, till-eat, death, violence and bloody-mindedness and white as forgiveness, expiation and salvation. The function of colors in conveying meaning was very effected to analyzing the visual power implications and psychological effects on human feelings that colors have in the movie.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.310-315
• /
• 2008

Organic-inorganic hybrid solutions were made using glycidoxypropyl trimethoxysilane (GPTMS) and vinyltriethoxysilane (VTES) as starting materials by sol-gel method. Photochromic coating solutions were prepared by mixing the solution of photochromic dye (spiropyran) dissolved in ethylacetate with the organic-inorganic hybrid solutions. Photochromic films were prepared on polycarbonate sheets by spin coating and cured for 2 h at $100^{\circ}C$. The resulting films exhibited a reversible color change upon irradiation with UV light from transparent to blue. The color-fading speed and pencil hardness of the coating films increased with increasing the GPTMS content in the coating solutions.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.112-117
• /
• 2008

Organic-inorganic hybrid solutions were prepared via sol-gel method using glycidoxypropyl trimethoxysilane (GPTMS) and methyl triethoxysilane (MTES) as starting precursors at a molar ratio of 1:1. The photochromic coating solutions were prepared by mixing the solutions of photochromic dye (spiropyran) dissolved in ethylacetate (EA) with the organic-inorganic hybrid solutions. Photochromic films were prepared on polycarbonate substrate by spin coating and cured for 2 h at $100^{\circ}C$. The resulting films exhibited a reversible color change upon irradiation with UV light. The photochromic properties of the films showed that the color-fading speed increases with increasing the EA content in the coating solutions.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.7-11
• /
• 2018

In this study, we synthesize tungsten oxide thin films by electrodeposition and characterize their electrochromic properties. Depending on the deposition modes, compact and porous tungsten oxide films are fabricated on a transparent indium tin oxide (ITO) substrate. The morphology and crystal structure of the electrodeposited tungsten oxide thin films are investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). X-ray photoelectron spectroscopy is employed to verify the chemical composition and the oxidation state of the films. Compared to the compact tungsten oxides, the porous films show superior electrochemical activities with higher reversibility during electrochemical reactions. Furthermore, they exhibit very high color contrast (97.0%) and switching speed (3.1 and 3.2 s). The outstanding electrochromic performances of the porous tungsten oxide thin films are mainly attributed to the porous structure, which facilitates ion intercalation/deintercalation during electrochemical reactions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.376-380
• /
• 2008

The optical properties of multi layered thin films with $Sb_2O_3/Na_3AlF_6/Sb_2O_3/Cr$ were simulated by using EMP(Essential Macleod Program). EMP is a comprehensive software package to design and analyse the optical characteristics of multi-layered thin film. $Sb_2O_3$ and $Na_3AlF_6$ were selected as a high refractive index and low refractive index material respectively. Additionally Cr was chosen as mid reflective material. Optical properties including color effect were systematically studied in terms of different optical thickness of low refractive index material. The optical thickness of $Na_3AlF_6$ was changed as 0.25, 0.5, 0.75 and $1.0\lambda$. The film with 0.25, 0.5, 0.75 and $1.0\lambda$ of optical thickness showed mixed color range between purple and red range, yellowish green and bluish green, purple and mixed color range of green and purple respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.5
• /
• pp.409-417
• /
• 2016

It is well known that Morpho butterflies show distinctive, brilliant and iridescent colors and have micro-nano scale structures, instead of dyes and pigments, on their wings. This structural coloration is regarded as a novel technique to express color with a long lifetime, ease and precise tenability. Here, we studied optical multilayer thin films with thickness of several tens of nm ($TiO_2$ and $SiO_2$) and lens-shape micro-patterns. Fabrication and characterization of the multilayer stacking structure and the micro-pattern structure were performed and the films were analyzed via several optical measuring techniques. Finally, we discussed how the micro-pattern structure could enhance independence with color changes according to the viewing angle.

• Electrical & Electronic Materials
• /
• v.19 no.9
• /
• pp.28-32
• /
• 2006

A 7.0-inch transmissive type plastic TFT-LCD was developed at the resolution of 640 $\times$ 3 $\times$ 480 lines (114ppi). All of the processed of TFT, color filter and LC were carried out below $130^{\circ}C$ on PES plastic films. The process conditions of TFT, color filter and LC were optimized for large area TFT-LCD on plastic substrate. The backplane and the color filter was strongly adhered while the panel was bending by using holding spacers.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.123-128
• /
• 1999

This paper reports the preparation and characterization of colored coatings of $Al_2O_3$-CoO. Films of 25mol% CoO doped $Al_2O_3$, have been prepared on soda-lime-silica slide glasses by the sol-gel process from Al-alkoxide and Co-nitrate. The films have been characterized by a photospectroscopy and hardness tester. The color, spectral reflectance and spectral transmittance of the films was expressed in Lab color chart and on spectra plot. Microhardness of the films increased with increasing of the heating temperature. Transmittance and reflectance of the films decreased with increase of the heating temperature and coating times. The coating films showed various light-yellow, deep-yellow, greenish-yellow color as a function of the coating times and heating temperature.