• Journal of information and communication convergence engineering
• /
• v.19 no.4
• /
• pp.214-220
• /
• 2021

In this study, we constructed several scenarios that are required for LED lighting, and we designed and implemented an LED lighting control system to operate these scenarios to confirm their behavior. An LED lighting control system is a hybrid control board that is designed by combining LED controllers and SMPS, consisting of an AC/DC power supply part that converts AC 220 V into DC 12 V, and a drive and control part that controls the scenario and color of the LED module. Conventional LED light controllers have an input power of DC 12 V, so when using the input AC 220 V, the SMPS must be connected to the LED light controller. To eliminate this inconvenience, a hybrid LED lighting control system was configured to combine LED lighting controllers and SMPS into one control system. Furthermore, we designed a control system to represent the most appropriate color according to the input of the distance and illumination using a fuzzy control system to conduct computer simulations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.2
• /
• pp.254-259
• /
• 2009

An experiment was conducted to evaluate the effect of different levels of extracted pigment from Dietzia natronolimnaea biomass as a source of canthaxanthin in comparison with synthetic canthaxanthin on egg yolk pigmentation. The experiment used a completely randomized design (CRD). A total of 63 laying hens, 68 weeks old, were used and the birds were allotted to 7 dietary treatments with each treatment replicated three times with three hens per replicate. Treatments consisted of 3 levels of synthetic canthaxanthin (4, 8 and 16 ppm), 3 levels of extracted pigment from D. natronolimnaea biomass (4, 8 and 16 ppm) and control. Changes in yolk color were determined in 2 eggs taken at random, during the four week experimental period from each replicate. Supplementation of extracted pigment from D. natronolimnaea biomass had a significant effect on the color of egg yolks (p<0.05). Yolk color score of the control group was 6.83 in BASF color fan and the yolk color score of different extracted pigment levels was 11.00, 12.50 and 14.50, respectively. The yolk colors of different levels of synthetic canthaxanthin were 12.00, 14.00 and 15.00, respectively. The effect of pigment supplementation on egg yolk color was better explained by polynomial response curves. The $R_{2}$ indicated that for 3 supplementation levels of each pigment studied, over 90% of the color variation could be explained by the pigment concentration. The egg yolk color after 15 and 30 days of storage was not significantly different, but boiling reduced egg yolk color significantly (p<0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.810-814
• /
• 1999

The influence of dietary vitamin E supplementation on meat color and ${\alpha}$-tocopherol concentrations in plasma, longissimus thoracis muscle and subcutaneous fat was investigated. Ten Japanese $Black{\times}Holstein$ crossbred steers were placed in three experimental groups receiving different supplements of vitamin E. Four steers (control) were fed no supplemental vitamin E. Two groups of three steers each, were supplemented with 500 mg dl-${\alpha}$-tocopherol acetate per animal daily for 175 days and 1,000 mg for 100 days, respectively, before slaughter. The ${\alpha}$-tocopherol concentration in plasma increased, as vitamin E were fed, and were related to the length of time and the amount of supplement. The ${\alpha}$-tocopherol concentrations in the muscle and the fat from the two supplemental groups did not differ significantly and were three or more times greater than those in the control group. Vitamin E supplementation did not affect the quantity of marbling of beef. Supplemental vitamin E stabilized the color of displayed beef around wavelengths of 500 nm and 640 nm. The two methods of vitamin E supplementation had similar effects on meat color. The effect of supplemental vitamin E on the color of beef with marbling was observed 2-3 days after slaughter and was followed for another two weeks.

• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.152-162
• /
• 2012

The color changing of the wood surface was tested by accelerated weathering test that can simulate the outdoor condition with short period. In early parts of accelerated weathering test, weight and volume of specimen all were increased due to the moisture evaporation by its high temperature and illumination level, but weight and volume of specimen all were decreased from middle parts to last. However, significancy showed between control group and accelerated weathering test group in terms of weight and volume. According to the results of color-difference meter, in the early parts of the accelerated weathering test lightness, redness and yellowness all showed a clear increasing or decreasing trend. However, after three weeks all values were almost never change. Until the early parts of the test, lightness was decreased and there was not a considerable change after three weeks in the test. Redness showed a some change in early parts of the test, but this also showed not great change after middle parts of the test as like lightness. Yellowness also showed same pattern. These results could be verified through the visual inspection. As like weight and volume, significancy showed between control group and accelerated weathering test group in terms of color-difference test. In all accelerated weathering test group, color-differences of after test was lower than that of before test. To correctly analyze this cause, more additional research will be need on each of temperature, humidity and illumination factors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.567-567
• /
• 2013

Surface plasmon resonance is the enhancement of electromagnetic wave caused by oscillation on the metal and dielectric interfaces. Surface plasmons with nanohole arrays provides an enhancedresonance for the specific wavelengths of interests. Asymmetric array of nanoscale structures can enable orientation dependent shift of resonance wavelengths when combined with the control of polarization for incident visible light, thus providing color tunability. Appropriate lattice constants along the direction of polarization in rectangular nanohole arrays can determine the resonance condition generating red (R), green (G), and blue (B) colors and potentially be applied to display applications. In ourprevious report, we have optimized the ion beam nanomachining conditions to fabricate the nanostructures on the metal film. We apply the fabrication conditions to make nanoscale hole arrays using 100 nm thick gold layer on the glass substrate with the optimal design of periodicities along x, y, and diagonal directions of a=440 nm, b=520 nm, c=682 nm, and the hole diameter of d=200 nm. Using the reflective light in dark field mode of optical microscope, we can observe different colors. When the polarizer is paralleled along a, b, or c direction, the represented color is changed to R, G, and B, respectively. We further map the color using i1 to correlate the conditions of the nanohole arrays with their characteristic color.

• Journal of Technologic Dentistry
• /
• v.44 no.4
• /
• pp.111-117
• /
• 2022

Purpose: This study was conducted to compare the Vickers hardness on the denture acrylic resins using the glaze color system. Methods: The specimens (20×2 mm) were prepared by mixing according to the manufacturer's protocols through thermal polymerization and self-polymerization. The surface roughness was measured using a testing machine after water-soaking for 48 hours. For the Vickers hardness measurement, the completed specimen was soaked in water for 48 hours and then applied at 200 gf for 30 seconds. Was the specimen immersed after being soaked in water for 48 hours at temperatures of 5℃ and 55℃, respectively, for 30 seconds for the thermos-cycling treatment, and it was carried out 5,000 times. Results: Surface roughness was higher in the more glazing group than in the control group. A significant difference was observed in all groups, except for the Retec Don 2000 and Luciton 199 groups (p<0.05). As a result of measuring the Vickers hardness, the treatment by glaze color showed slightly lower but the thermo-cycling treatment group appeared higher than control group in all. Conclusion: Therefore, the glaze color was found to affect the surface roughness and showed a significant difference. The surface glaze color showed a very high Vickers hardness after the thermo-cycling treatment, indicating that the surface-strengthening effect is greater in the oral environment.

• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.580-593
• /
• 2023

The purpose of this study was to analyze whether seawater has positive effects on appearance characteristics, such as CIE a^*, and to determine the gas composition concentration that is suitable for maintaining it. Pork hind meat was cured with four types of curing agent for 5 d at 4℃. The different curing agents comprised the control salt, control nitrite pickling salt (CN), treatment brine, and treatment bittern (BT). The cured hams were cooked at 65℃ for 4 h and packaged at O₂:N₂ gas ratios of 7:3, 8:2, and 9:1 for 3 wk. The physicochemical properties were assessed immediately after heating the sample, and the color properties were measured after a 3 wk storage period. Based on the correlation results of the physicochemical properties, BT had a higher curing and cooking yield than the other treatments, owing to its high salinity. Results of color properties for BT (7:3) and CN (8:2) showed similar color CIE L^*, CIE a^* chroma, and hue angle values. Therefore, BT can be said to be a sous-vide curing agent suitable for preserving the color of ham, and a high nitrogen concentration of 30% helps to maintain the appearance of seawater sous-vide ham.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.836-841
• /
• 2004

This paper describes ASIC design for brightness revision control, A LED Pixel Matrix (LPM) design and LPM in natural color LED vision. A designed chip has 256 levels of gradation correspond to each Red, Green, Blue LED pixel respectively, which have received 8bit image data. In order to maintain color uniformity by reducing the original rank error of LED, we adjusted the specific character value 'a' and brightness revision value 'b' to pixel unit, module unit and LED vision respectively by brightness characteristic function with 'Y=aX+b'. In this paper, if designed custom chip and brightness revision control method are applied to manufacturing of natural color LED vision, we can obtain good quality of image. Furthermore, it may decrease the cost for manufacturing LED vision or installing the plants.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1996.11a
• /
• pp.53-56
• /
• 1996

In this paper, the pulsed mode operated gas discharge tube is composed with mixed gas of Hg-Ne (10 Torr), in the tube of 15.0 mm outer diameter and has variable color from red to blue with changing frequency high voltage. As increasing frequency in the gas discharge tube, the phenomena, that the electron temperature in the positive column increases and the radiation from atoms of higher upper state energy levels increases, exist The color have the locus from red (0.4972, 0.3128) to blue (0.2736, 0.2619) in CIE chromacity diagram with increasing frequency. The method of changing frequency has been shown to be suitable for the luminous color control.

• Resources Recycling
• /
• v.11 no.5
• /
• pp.24-29
• /
• 2002

In this study, to improve the color of iron oxide from waste pickling acid at the cold rolling mill, the quality control technologies especially about color were investigated on the spray roaster and iron oxide powder. At the operation condition of the spray roaster, the charge amount of waste acid per hour, temperature, numbers of spray nozzle were investigated. At admixing process, titanium oxide, silica, goethite were tested. Color character of iron oxide can be improved by process control at spray roaster and by admixing process at a pigment factory Iron oxide from results of this study is enough to use as the colorant of concrete product.