• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1407-1410
• /
• 2007

This work reports on three primary color fluorescent white organic light emitting diode (WOLED) with simple device structure where only a part of the hole transporting layer was doped with dye. The maximum luminance of the device reaches $35000\;cd/m^2$ at a drive voltage below 11V and external quantum efficiency of the device is above 1% in the wide range of luminance from 10 to $35000\;cd/m^2$ and reaches its highest 1.6% at $500\;cd/m^2$. The chromaticity coordinate shift of the device is negligible in this wide range of luminance. The blue shift of emission color with an increase of current density was attributed to the narrowing of recombination zone width with raise of current density.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.901-902
• /
• 2003

Three-color organic light-emitting diodes (OLEDs) of metal-semiconductor-metal (MSM) structure have been favricated by using m-MTDATA [4,4',4"-tris (3-methylphenylphenylamino) triphenylamine] as hole injection layer(HIL). The mMTDATA is shown to be an effective hole injecting material, in that the insertion of mMTDATA greatly reduces the roughness of anode surface and improves the device performance. Red, green and blue OLEDs were fabricated, and their color coordinates in CIE chromaticity were found to be (0.600, 0.389), (0.240, 0.525), and (0.171, 0.171), respectively. The luminous efficiencies of the fabricated OLEDs were 1.4 lm/W at 106 $cd/m^{2}$ for red, 1.4 lm/W at 100 $cd/m^{2}$ for green, and 2.0 lm/W at 104 $cd/m^{2}$ for blue.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.928-931
• /
• 2003

In order to realize full color display, two approaches were used. The first method is the patterning of red, green, and blue emitters using a selective deposition. Another approach is based on a white-emitting diode, from which the three primary colors could be obtained by micro-patterned color filters. White-light-emitting organic light emitting devices (OLEDs) are attracting much attention recently due to potential applications such as backlights in liquid crystal displays (LCDs) or other illumination purposes. In order for the white OLEDs to be used as backlights in LCDs, the light emission should be bright and have Commission Internationale d'Eclairage (CIE) chromaticity coordinates of (0.33, 0.33). For obtaining white emission from OLEDs, different colours should be mixed with proper balances even though there are a few different methods for mixing colors. In this study, we will report a white organic electroluminescent device using exciton diffusion length concept.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.165-166
• /
• 2000

Spatial independence and temporal stability of flat-panel LCD monitor, LG StudioWorks 500LC, were evaluated. The luminance and chromaticity of stimulus color were measured according to the variation of the size, background color, and location on the screen. The spatial independence at center location is very good and not a limiting factor in its colorimetric characterization, however the spatial non-uniformity is a little severe. The warmup time to stabilize after initial power is about 100 minutes and short-term variance of white stimulus is within 0.1 ${\Delta}E^*\;_{ab}$.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.820-828
• /
• 1999

This study suggests the accurate method to calculate dominant wavelength and excitation purity which are used for analyzing color of glass product. Instead of ruler and magnified chromatricity diagram by using the slope of lines by tristimulus measured and achromatic timulus and by monochromatiic stimulus and achromatic stimulus calculating method of dominant wavelength and excitation purity was acquired with the relation between them. When it was applied to products the obtained results were more accurate than those from existing methods.

• Journal of the Korean Ceramic Society
• /
• v.56 no.3
• /
• pp.298-301
• /
• 2019

This paper details the synthesis of α-FeOOH (goethite) rods through the reaction of iron (III) nitrate with KOH as a strong base, and shape control of the particles for use as a yellow inorganic pigment. The crystal phase of the α-FeOOH crystal with OH content according to the addition of KOH and the change in morphology were investigated. The optical properties varied with the aspect ratios, and the yellowness increased with increasing aspect ratio. However, the enhanced chromaticity characteristics reversed beyond a certain critical aspect ratio. Thus, the relative optimal aspect ratio of the α-FeOOH rods as a vivid yellow inorganic pigment was derived. The morphology and coloration of the prepared rods were investigated in detail using X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis spectroscopy, and CIE Lab color parameter measurements.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.83-91
• /
• 2019

The purpose of this study is to assess a fire-damaged concrete structure using a digital camera and image processing software. To simulate it, mortar and paste samples of W/C=0.5(general strength) and 0.3(high strength) were put into an electric furnace and simulated from $100^{\circ}C$ to $1000^{\circ}C$. Here, the paste was processed into a powder to measure CIELAB chromaticity, and the samples were taken with a digital camera. The RGB chromaticity was measured by color intensity analyzer software. As a result, the residual compressive strength of W/C=0.5 and 0.3 was 87.2 % and 86.7 % at the heating temperature of $400^{\circ}C$. However there was a sudden decrease in strength at the temperature above $500^{\circ}C$, while the residual compressive strength of W/C=0.5 and 0.3 was 55.2 % and 51.9 % of residual strength. At the temperature $700^{\circ}C$ or higher, W/C=0.5 and W/C=0.3 show 26.3% and 27.8% of residual strength, so that the durability of the structure could not be secured. The results of $L^*a^*b$ color analysis show that $b^*$ increases rapidly after $700^{\circ}C$. It is analyzed that the intensity of yellow becomes strong after $700^{\circ}C$. Further, the RGB analysis found that the histogram kurtosis and frequency of Red and Green increases after $700^{\circ}C$. It is analyzed that number of Red and Green pixels are increased. Therefore, it is deemed possible to estimate the degree of damage by checking the change in yellow($b^*$ or R+G) when analyzing the chromaticity of the fire-damaged concrete structures.

• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.710-714
• /
• 2014

The effect of titanium dioxide ($TiO_2$) on the properties of color conversion glasses was examined for glasses based on $BaO-ZnO-B_2O_3-SiO_2$. One glass sample, containing 25 mol% of each component, was used as a reference; the other three glass samples contained 1, 3, and 5 mol% $TiO_2$, respectively. The four color conversion glass samples were prepared by sintering a mixture of glass frits and a $YAG:Ce^+$ phosphor. The characteristics of the color conversion glass samples, such as luminous efficacy, luminance, CIE (Commission International de I'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) were analyzed according to the PL spectrum. The refractive index of the glass samples was found to increase with the titanium dioxide content. In conclusion, luminous efficacy of color conversion glasses increased as the content of $TiO_2$ was raised in the glass matrix.

• Journal of Environmental Science International
• /
• v.23 no.4
• /
• pp.681-695
• /
• 2014

In a pilot-scale dyeing wastewater treatment using two-type fluidizing media, each thickness of biofilm was 15 and 30 ${\mu}m$, respectively. The numbers of protozoa inhabited in small-size (PEMT A) and big-size (PEMT B) media were $7.5{\times}10^4$ and $1.25{\times}10^5$ cells/ml, respectively, and dominant species were Entosiphon sulcatus var sulcatus in PEMT A and Chlamydomonas reinhardtii in PEMT B, respectively. Flask experiments using the two media revealed that the percentages of color removal were 25.8% in PEMT A and 27.1% in PEMT B after 72-h cultivation, indicating the necessity of bioaugmentation. Experiments for bioaugmentation effect on color removal were carried out in the pilot-scale treatment for 75 d by three-step operation under the control of wastewater loading rate and microbial input rate. Dye degradation occurred mainly in the second reaction tank, and the attachment of augmented dye-degrading microorganisms to media took at least 35 d. Final value of chromaticity in effluent was 227, meeting the required standard. Therefore bioaugmentation onto media was good for color treatment. In summary, thickness of biofilm formed on the media depended upon the size of media, resulting in different ecosystem inside the media. Hence, this affected microbial community and color treatment further. Accordingly, the reduction of operation cost is expected by efficient color-treatment process using bioaugmented media.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.31-38
• /
• 2005

In this paper, we propose the chromatic adaptation models (CAM) for the variations of the luminance levels. A chromatic adaptation model, CAM$\Delta$Y , is proposed according to the change of luminance level under the same illuminants. The proposed model is obtained by the transform the test colors of the high luminance into the corresponding colors of the low luminance. In the proposed model, the optimal coefficients are obtained from the corresponding colors data of the Breneman's experiments. In the experimental results, we confined that the chromaticity errors, $\Delta$u'v', between the predicted colors by the proposed model and the corresponding colors of the Breneman's experiments are 0.004 in u'v' chromaticity coordinates. The prediction performance of the proposed model is excellent because this error is the threshold value that two adjacent color patches can be distinguished. Additionally, we also propose equal-whiteness CCT curves (EWCs) by CAM$\Delta$Y according to the luminance levels of the surround viewing conditions. And the proposed EWCs can be used as the theoretical standard which determines the reference white of the color display devices.