• Korean Journal of Organic Agriculture
• /
• v.26 no.3
• /
• pp.439-452
• /
• 2018

This study was carried out to establish of environment-friendly control system and to survey the occurrence status of Ricania shanthungensis in Jeonnam province from 2016 to 2017. R. shanthungensis occurred at 1,344 ha in 61 towns of 15 cities in Gwangju and Jeonnam province. At four sites in the stationary area, the densities of eggmass and pupae were lower in 2017 than in 2016, the hatching rate decreased, and the first hatching time, emergence of adults, and the start of spawning tended to be slower. Telenomus sp., an egg parasitoid of R. shanthungensis, was found in most areas. Sunchon had the highest rate of 46.1%, followed by Muan 40.6, Goksung 29.2, Gurye 25.8, and Gwangju 17, respectively. The optimum spraying time for the control of R. shanthungensis was early March. The spraying material and the dilution multiples are 10 times of the machine oil at environmental friendly cultivation and 500 times of the chlorpriphosphate wp. at normal cultivation. When sprayed these materials, 95% of egg prohibited to hatch. There was more than 80% of the insecticidal effects on the organic materials of the machine oil emulsion, the Sophora root extrect + microbial extract agent, and the castor emulsion. For adults, Sophora root extrect + microbial extract, neem extract, and machine oil were better. Four kinds of chemical pesticides such as dinotefuran wp were effective for nymph and adult control. We have developed an adult catching device using the most preferred daylight color and behavioral habits of R. shanthungensis. The capture device consisted of two daylight compact lamps (30W and 20W), a yellow plate, and a catcher using water, and caught about 700 individuals a day. Based on the above results, we have established a system for controlling and life cycle of R. shanthungensis in Jeonnam province.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.329-344
• /
• 2002

Mineralogical and chemical characterization of some domestic bentonites, such as quantitative XRD analysis, chemical leaching experiments, pH and CEC determinations, were done without any separation procedures to understand their relationships among mineral composition, characteristics, and cation exchange properties. XRD quantification results based on Rietveld method reveal that the bentonites contain totally more than 25 wt% of impurities, such as zeolites, opal-CT, and feldspars, in addition to montmorillonite ranging 30～75 wt%. Cation exchange properties of the zeolitic bentonites are deeply affected by the content of zeolites identified as clinoptilolite-heulandite series. Clinoptilolite is common in the silicic bentonites with lighter color. and occurs closely in association with opal-CT. Ca is mostly the dominant exchangeable cation, but some zeolitic bentonites have K as a major exchangeable cation, The values of cation exchange capacity (CEC) determined by Methylene Blue method are comparatively low and have roughly a linear relationship with the montmorillonite content of the bentonite, though the correlated data tend to be rather dispersed. Compared to this, the CEC determined by Ammonium Acetate method, i.e.‘Total CEC’, has much higher values (50～115 meq/100 g). The differences between those CEC values are much greater in zeolitic bentonites, which obviously indicates the CEC increase affected by zeolite. Other impurities such as opal-CT and feldspars seem to affect insignificantly on the CEC of bentonites. When dispersed in distilled water, the pH of bentonites roughly tends to increase up to 9.3 with increasing the alkali abundance, especially Na, in exchangeable cation composition. However, some bentonites exhibit lower pH (5～6) so as to regard as ‘acid clay’. This may be due to the presence of $H^{＋}$ in part as an exchangeable cation in the layer site of montmorillonite. All the works of this study ultimately suggest that an assesment of domestic bentonites in grade and quality should be accomplished through the quantitative XRD analysis and the ‘Total CEC’measurement.

• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.351-360
• /
• 2002

The Korean fresh pork loins in vacuum packaged were obtained from three different Korean export companies and investigated for microbiological and sensory properties. The fresh pork loins were stored at 2$^{\circ}C$ for 50 days and analyzed with an interval of 5$\sim$10 days. The results were as follows: The overall numbers of total plate counts and coliform bacteria were higher in swab method than in meat sampling method. The total plate counts in the loins from the company I were maintained low levels ($\prec$10$^5$ cfu/$cm^2$ or $\prec$10$^5$ cfu/g) for entire storage periods(50 days at 2$^{\circ}C$), whereas the loins from the company III had high levels when they were compared to the domestic standard for the allowance limit. The samples from the company III showed that total plate counts were over 106 after about 30 days when determined by meat sampling method and total plate counts were over 106 after 15 days when determined by swab method. The overall numbers of coliform bacteria were also significantly lowest in the samples from the company I, whereas they were highest in the company III. Therefore, all meat companies will have to make an effort to prevent bacterial contamination in each stage such as slaughtering, marketing and consumer in order to ensure the production of safe meat and the extension of shelf-life. For fresh products, scores of intramuscular fat were higher in samples form the companies II and III than those from the company I when visibly evaluated with the standard. There were no significant differences in scores of meat color, drip and fresh meat flavor. However, the samples from the company I had the lowest score of off-flavor and highest score of overall acceptability. For cooked products, there were no significant differences in meat flavor, off-flavor, juiciness and overall acceptability.

• Journal of Gastric Cancer
• /
• v.9 no.4
• /
• pp.172-176
• /
• 2009

Purpose: The rapid urease test is a rapid and reliable method for diagnosing Helicobacter pylori infection. However it requires gastric mucosal biopsies during endoscopy, and the test is not covered by national health insurance for patients with gastric cancer. So, we introduced an alternative method for a rapid urease test using back-table gastric mucosal biopsies from gastrectomy specimen. Materials and Methods: Ninety gastric cancer patients underwent an anti H. pylori IgG ELISA test and gastrectomy. Just after gastrectomy, two gastric mucosal biopsies from the prepyloric antrum and lower body of the gastrectomy specimen were taken from the back table in the operative room, and these were fixed immediately with the rapid urease test kit, and the color change was monitored for up to 24 hours. In this study, H. pylori infection was defined as positive when the serology or rapid urease test showed positive results. Results: The positive rate of the rapid urease test and serology was 91.1% and 77.8%, respectively. The sensitivity, specificity, positive predictive value and negative predictive value of the rapid urease test and serology were 94.3 and 80.5%, 100 and 100%, 100 and 100%, and 37.5 and 15%, respectively. The accuracy of the rapid urease test was higher than that of serology (94.4 vs. 81.1%, respectively). The rapid urease test showed a higher rate of detecting H. pylori infection than that of serology (McNemar's test, P=0.019). Conclusion: The result of the rapid urease test using back-table gastric mucosal biopsies from a gastrectomy specimen is comparable to the reference data of the conventional rapid urease test using gastric mucosal endoscopic biopsies. Therefore, it can be an alternative diagnostic method for H. pylori infection.

• Korean Journal of Organic Agriculture
• /
• v.21 no.1
• /
• pp.79-93
• /
• 2013

The experiment was conducted to investigate the effects of feeding herbaceous peat on growth performance and meat quality of Holstein beef cattle. Total of 20 Holstein beef cattle (18~20 month of age, $657{\pm}31kg$ body weight) were conventionally and separately fed a concentrate diet and rice straw for 134 days. The dietary treatments were randomly assigned by complete block design into four treatments, each of which were five heads in early fattening stage. The treatments in this study were the control group fed basal diet, feeding herbaceous peat group (5%/diet, T1), feeding coated vitamin C group (20g/head, T2) and feeding mixture of herbaceous peat and coated vitamin C group (5%/diet+20g/head, T3). The initial body weights between the groups of control, T1, T2 and T3 were similar showing with $689{\pm}31$, $661{\pm}24$, $659{\pm}32$ and $622{\pm}19kg$. The daily body weight gain was higher in T3 by 8.3% than that in the control (p<0.05). Glucose concentration in control group was the highest among treatments (p<0.05), but there was no significant differences between treatments on AST (aspartate aminotransferase), ALT (alanine aminotransferase), BUN and total protein concentrations of blood. The fat content of sirloin in the T2 was significantly higher than control and T1 group (p<0.05). Meat color (CIE) values in T2 was the highest among treatments (p<0.05), and other treatments also increased those values. In overall, the feeding herbaceous peat and vitamin C to the Holstein beef cattle was considered to have positive effects on the growth performance of Holstein beef cattle. In addition, the effects on the performances of animals were more improved when fed herbaceous peat and vitamin C concurrently.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.17-24
• /
• 1994

The urinary excretion of ${\delta}$-aminolevulinic acid has been widely used as a measure of the biological effect of lead in lead exposed workers. It is usually measured by colorimetric method based on the color reaction of ALA-pyrrole with Ehrlich's reagent. But the results of ${\delta}$-ALA in urine by this method are somewhat artificially higher than expected due to the urinary ALA-like compound such as aminoacetone. On the other hand, the recently developed fluorometric HPLC method is very sensitive and specific for the measuring urinary ALA. In order to compare the data obtained by two methods and to investigate the interrelation between two methods, 117 lead workers with different lead exposure were checked urinary ${\delta}$-ALA, blood lead and other lead exposure related indices. The results obtained are as follows; 1. Urinary excretion of ${\delta}$-ALA by colorimetric method is 2.15 times higher than HPLC method in overall, revealing 2.47 times in workers of blood lead less than $20{\mu}g/dl$, 2.53 times in workers of blood lead $21-40{\mu}g/dl$ and 1.86 times in workers of blood lead over $41{\mu}g/dl$, respectively. 2. While the correlation coefficients of ${\delta}$-ALA measured by colorimetric method with blood lead and blood ZPP was 0.571 and 0.629, those of ${\delta}$-ALA measured by HPLC with blood lead and blood ZPP were 0.6l0 and 0.637. All the correlation coefficients were statistically significant, but there was no statistical difference of correlation coefficients between two methods. 3. The correlation coefficient of urinary excretion of ${\delta}$-ALA between two method was 0.838 without any correction, but it was 0.852 with the correction of specific gravity 1.024. 4. Simple linear regression of ${\delta}$-ALA measured by HPLC method on ${\delta}$-ALA measured by colorimetric method was (ALA-UPH)=-0.245+0.536 (ALA-UCO) without any correction and it was (SP ALA)=-0.525+0.598 (SP ALA-UCO) with the correction of specific gravity 1.024. With above results, it is recommended that the diagnostic criteria of ${\delta}$-ALA for lead poisoning needed to be revised if ${\delta}$-ALA is measured by HPLC rather than colorimetric method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.317-328
• /
• 2019

In this work, we investigated clay and raw materials from China (black clay, red clay, white clay) and Korea (Cheonan clay, Obu clay) used for the manufacture of porcelain products. According to chemical analysis results, feldspar components containing CaO, K₂O, Na₂O and quartz are found in clay materials besides primary clay such as kaollinte, for the clay materials from Korea, which is found more in clay materials from Korea than from China. For the Fe₂O₃ content, governing whiteness of porcelain products, more iron oxide (> 5 %) is found in Korean clays (Cheonan clay, obu clay, red clay) compared to those form China (black, white clay). Through X-ray diffraction analysis, kaolinite and Halloysite are found to be main phases for all the raw materials and second phases such as quartz and pyrophyllite are found. Using these clay materials, raw materials for porcelain products were produced, and the physicochemical properties were investigated for sintered samples. Absorption rate is in order of Baekja-A < Baekja-B < Yeonbuncheong < Jinbuncheong < Cheongja, and the sample, sintered at 1250℃ in reductive atmosphere, exhibits the lowest absorption rate. Comparing the color of the sintered samples, the samples sintered in oxidative atmosphere (L^* value: 86~95 %) show higher whiteness value than those sintered in reductive atmosphere (L^* value: 81~93 %). For the Cheongja and Buncheong, the samples sintered in reductive atmosphre shows higher whiteness, L^* values, and low a^*/b^* value, which is due to reduction of iron oxide (Fe₂O₃).

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.469-485
• /
• 1996

Orthodontic patients are individuals that grow and develop ; therefore selection of the proper time for orthodontic treatment is considered to be one of most difficult and yet difficult factor. Since the development of cephalometric X-ray, amount and Pattern of craniofacial growth change with aging could be predicted and be came useful in the process of orthodontic treatment. The relationship between the mean values of cephalometric measurements and body height and weight was studied among the groups(boys and girls) of Korean children from the ages 6-years to 17-years. 409 boys and 437 girls with no abnormality in growth and development and no history of orthodontic treatment from the ages of 6 years to 17 years were chosen as subjects Cephaloment X-ray were taken for 3 years and hard tissue analysis based on Burstone's COGS, which was devided into measurements of 6 parts(Cranial base, Maxillar and Mandible, Dental measurements). The relationship between craniofacial growth and height & weight was studied. The following conclusions were obtained : 1. The maximum growth in the measurements of cranial base, N-Ar(FH), N-Ba(FH) corresponded with the age with the maximum increase in body height & weight in both boys and girls. 2. Genial angle gradually decreased with aging in both boys and girls. 3. N-ANS(L) showed greater amount of growth than ANS-Ne(L), and this had greater influence on facial profile. 4. N-A-$Pog^{\circ}$ decreased with aging, and mandibular growth exceeded maxillary growth in amount and rate. 5. Length of Y-axis Increased, but Y-axis to FH plane remained constant. This show that mandible grows at a constant angulation to cranial base. 6. As permanent teeth erupt, interincisal angle deceased.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.24-33
• /
• 2020

In excavated bronze artifacts, corrosion products of various shapes and colors are observed due to multiple corrosion factors coexisting in the burial environment, and these corrosion products can constitute important data not only in terms of long-term corrosion-related information, but also in connection with preservation of artifacts. As such, scientific analysis is being carried out on the corrosion layer and corrosion products of bronze artifacts, and the corrosion mechanism and the characteristics of corrosion products elucidated, which is essential for interpreting the exposed burial environment and its association with corrosion factors inside the burial environment. In this study, after classifying excavated bronze artifacts according to alloy ratio and fabrication technique, comprehensive analysis of the surface of corrosion artifacts, corrosion layer, and corrosion products was carried out to investigate the corrosion mechanism, formation process of the corrosion layer, and characteristics of corrosion products. The study designated two groups according to alloy ratio and fabrication technique. In Group 1, which involved a Cu-Sn-Pb alloy and had no heat treatment, the surface was rough and external corrosion layers were formed on a part, or both sides, of the inside and the outside, and the surface was observed as being green or blue. α+δ phase selection corrosion was found in the metal and some were found to be concentrated in an empty space with a purity of 95 percent or more after α+δ phase corrosion. The Cu-Sn alloy and heat-treated Group 2 formed a smooth surface with no external corrosion layer, and a dark yellow surface was observed. In addition, no external corrosion layer was observed, unlike Group 1, and α corrosion was found inside the metal. In conclusion, it can be seen that the bronze artifacts excavated from the same site differ in various aspects, including the formation of the corrosion layer, the shape and color of the corrosion products, and the metal ion migration path, depending on the alloy ratio and fabrication technique. They also exhibited different corrosion characteristics in the same material, which means that different forms of corrosion can occur depending on the exposure environment in the burial setting. Therefore, even bronze artifacts excavated from the same site will have different corrosion characteristics depending on alloy ratio, fabrication technique, and exposure environment. The study shows one aspect of corrosion characteristics in specific areas and objects; further study of corrosion mechanisms in accordance with burial conditions will be required through analysis of the corrosive layer and corrosive product characteristics of bronze artifacts from various regions.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.204-212
• /
• 1994

To estimate the possibility of wine-making with Korean dried persimmon, its homogenized and filtered solution was fermented at $15^{\circ}C$ and $25^{\circ}C$ for 12 weeks with Saccharomyces cerevisiae (Japan Alcoholic Beverage Association N0.7). Sugars of dried persimmon were mainly composed of 27.02% of glucose, 19.81% of fructose and 5.12% of mannose. In the fermentation at $25^{\circ}C$, glucose was almost completely consumed in 8 days, but fructose and mannose were consumed up to 64% and 74%, respectively, in the same period and were not utilized any more afterwards. In the fermentation at $15^{\circ}C$, 75% of glucose, 20% of fructose and 49% of mannose were consumed in 8 days and these sugars were continuously utilized for 12 weeks. Organic acids in the homogenized and filtered solution were levulinic acid (148.6 mg%), 4-methylvaleric acid (73.5 mg%), oxalic acid (28.7 mg%), acetic acid (8.5 mg%), N-butyric acid (8.4 mg%) and succinic acid (6.7 mg%). Irrespective of fermentation temperature, levulinic acid rapidly reduced according to progression of fermentation. Oxalic acid, N-butyric acid and succinic acid decreased at 2nd day of fermentation, and then increased at 4th and 6th days and subsequently decreased again under the levels of the solution. Acetic acid and 4-methylvaleric acid increased with the proceeding of fermentation and at 12th week of fermentation these contents were more than those of the solution. The contents of total free amino acid significantly reduced at 2th day of fermentation and then increased to the level of the solution at 12th week irrespective of fermentation temperature. Ethanol content rapidly increased to the levels of 5.3(v/v) at $15^{\circ}C$ and 9.4%(v/v) at $25^{\circ}C$ to 8th day after fermentation, but at 12th week its content was 14.5%(v/v) at $15^{\circ}C$ and 9.4%(v/v) at $25^{\circ}C$. The higher alcohots identified were 2-methyl-l-propanol, 3-methyl-ibutanol, 2-methyl-l-butanol and 2-methyl-2-propanol and the range of those contents was from 0.001% (v/v) to 0.06%(v/v). The color of the wine fermented at $15^{\circ}C$ was slightly superior but flavor and taste were slightly superior in the wine fermented at $25^{\circ}C$.