• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.1-11
• /
• 2020

Medium to large post structures installed along the roadside without proper protection can lead to serious vehicle damage and occupant injury at the impact. In North America and Europe, splitting systems such as slip base or breakaway device are used to reduce impacts. But the system has the risk of secondary accident when the splitted post falls down to the traffic or pedestrian. Sliding Post have been proposed as a way to solve this problem. By studying the crash test results of the 1.3ton and 0.9ton vehicle with 60 km/h and 80 km/h to a Rigidly Fixed Post (RFP) and Sliding Post (SP), danger of the conventional RFP and crashworthiness of the SP have been proven. While collision analysis only from the acceleration measured at the center of the vehicle assumes the motion of the post is the same as that of the vehicle, in this paper, by adding high speed film data to the analysis with vehicle acceleration could have separate the post motion from the vehicle motion. It gives better explanations on the movement of post and vehicle in each distinctive time step and provides basics to the crashworthy post design.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.28-38
• /
• 2016

Cooperative-Intelligent Transport Systems (c-ITS) has emphasized a real-time traffic safety service in urgent situations among highway infrastructure and four-wheeled vehicles, while two-wheeled vehicles, e.g. bicycles and motorcycle, sharing highway space and endangering highway safety, have yet been out of its interest. This paper delivers the results of a study conducted to analyze the patterns of two-wheeled-vehicle traffic accidents experienced in the past, the last three years (2011~2013), and to propose the types of service enhancing the safety of the riders of those. It was found from the analysis of historical accident data that the side collision on a link section should be taken care of for further safety treatment, while the old female drivers need additional care to decrease their fatality rate. By combining the services proposed for bicycles and motorcycles, this paper proposes (1) eight different bicycle-to-everything (B2X) services which can be eventually provided in c-ITS and (2) three of those that would be available in the near future with the current communication technologies.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.75-87
• /
• 2004

Along the seashore regions in Korea, though strong winds with very large strength are frequently witnessed, no system which can provide appropriate speed information for driving vehicle has been introduced. The driving against strong winds could be very dangerous because of the high possibility of accidents such as rollover and collision. These accidents usually resulted from driver's forced driving try even in difficult situation for steering vehicle, and sometimes overspeed without consideration of wind impact to the vehicles. To reduce accident caused by strong winds, it is important to inform drivers of appropriate driving speeds by perceiving strong winds. By setting up WIS at the main points where strong winds frequently appear and using the variable message sign(VMS) connected to the on-line whether information system, it tis possible to provide desired speed information, which can maintain vehicles' tractive force and maximum running resistance. The case study is conducted on the case of Mokpo-Big-Bridge, which is under construction at Mokpo city. The result show that in case the annual average direction of wind is South and the wind speed is over 8m/hr, the desired speed, which is required in order for vehicles running to South direction to maintain the marginal driving power, is 60km/hr. In addition, for the case of a typhoon such as Memi generated in 2003 year, if wind speed had been 18m/sec in Mokpo city at that time, the running resistance at the speed of 40km/hr is calculated as 1131N. This resistance can not be overcome at the 4th gear(1054N) level, therefore, the gear of vehicles should be reduced down to the 3rd level. In this case, the appropriate speed is 40km/h, and at this point the biggest difference between running resistance and tractive force is generated.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.34
• /
• pp.77-108
• /
• 2007

The traditional name given to the insurance of third party liabilities and certain contractual liabilities which arise in connection with the operation of ships is protection and indemnity(P & I) insurance. P & I insurance is very different from traditional hull and machinery insurance in that shipowners' hull and machinery insurance is designed primarily to protect the assured against losses to his vessel, whereas P & I insurance seeks to indemnify an shipowner in respect of the discharge of legal liabilities he has incurred in operating his own vessels. This study is to examine the background of establishment of British P & I clubs md, therefore, the identity of P & I insurance. The present British P & I clubs are the remote descendants of the many small and local hull mutual insurance clubs that were formed by British shipowners in the end of 18th century. At that time, British shipowners were dissatified with the state of marine insurance market and, therefore, established clubs together in mutual hull insurance clubs. After the removal of the company monopoly in 1824, greater competition had a good effect on the rates, terms of cover and service offered by the commercial marine insurance market and by Lloyd's underwriters, and the hull clubs became less necessary and went into decline. The burden of British shipowners on liabilities to third parties was steadily increased after the middle of the 19th century, but the amount insured under hull policy was limited in the insured value of the ship. Eventually, the first protection club, that is, the Shipowners' Mutual Protection Society was formed in 1855. It was designed to like past mutual hull clubs, but to cover liabilities for loss of life and personal injury and also the collision risks excluded from the current marine policies, particularly the excess above the limits in hull policies. In 1870, the risks of liability for loss of or damage to cargo carried on board the insured ship was first awarded by the British shipowners. After 1874, many protection clubs formed indemnity club to cover the risk of liability for loss or damage to cargo. As mentioned above, British P & I clubs have been steadily changed according to the response of shipowners under the rapidly changing law of British shipowners' liability, and so on in the future.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.312-317
• /
• 2015

Seafarers can confront to evacuate from the ship with many reasons such as collision, grounding and fire accident. It believes that evacuation time from ship is very important element in order to increase survival rate in the contingency circumstance, however narrow and complex structure of ship is one of obstacle element against prompt evacuation. Taking into consideration the unique structure of ship compared to the structure of other facilities, speed of fire propagation on board ship is faster than the same size of other type facilities. Therefore, measures to prompt evacuation are required. But it comes with the behavioral constraints of the crews and passengers of the nature of operating in a complex structure with narrow vessels. Therefore, in this study, we propose a formula to be analyzed by theoretical approach and simulation methods to improve the survival rate for the crew and passenger of the ship through the ship's structural modification. We analyzed the temperature rise and visibility which are the most influential effects on the life safety in the event of fire by using a three-dimensional analysis of sight-only program Fire Dynamic Simulator (FDS) as analytical tools.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.47-56
• /
• 2008

Two-Lane Highway of Korea is important, Because it has the largeest portion of all roads of Korea. But it has only one lane for one direction. So, If Delays are happened by low-speed vehicles, high-speed vehicles should over-take through the other side of the road. This over-takings can generate the high possibility of traffic accidents and the severity of traffic accidents by over-takings is very high. Because it generates a head-on collision. But the level of Service that indicates the operation states of Two-Lane Highway is defined as a conception that explains the operation conditions of traffic safety etc. Whencalculating the Level of service. It is considered by only delays. So, in this paper, first, this author wants to present the calculation of delay-time by Total-Delay Rate. Second, by multiplying this delay-time by the costs of delays wants to present the method of calulates the total delay costs. Third, to consider the traffic accidents, After predicting the number of traffic accidents, As multipling this by the average of costs of traffic accidents. want to present the method to calculate Total traffic accidents costs. Forth, present the operation costs.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.2
• /
• pp.1-10
• /
• 1989

The major causes of the facial bone fractures are fractures are automobile collision or other accident, and fights. Of the facial bone fractures, the nasal bone fractures are monst common. According to Schroeder et al., 50% of facial bone fractures are isolated fractures of the nasal pyramid. But the fractured nasal bone is not immediately treated as other facial bone fractures. And it is necessary to delay the treatment of the combined nasal bone fractures with other jaw bone fractures because of the difficult anesthetic techniques. Therefore there are many residual nasal deformities following a fracture; nasal hump, saddle nose and alar rim defect. Many authors have suggested the methods to correct the post-traumatic nasal deformities. We have treated several patients with several methods and this paper presents the operating methods and results.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.217-225
• /
• 2014

The system that covers gathering, integrating, exchanging, presenting and analyzing of information within ships and shores for the safety and security in Marine Environment is known as e-Navigation Policy. Northern Europe has been conducting research and development. It came up into a concept that deals with ship's route information between vessels as well as vessels to shores which is better known as route exchange system. The research showed substantial advantages on navigational safety by exchanging the route information between vessels in vicinity and vessels to shores. Therefore, upon the adaptation of route exchange System as a major function in integrated navigational system, the existing procedures in VTS could be changed for betterment. In this study, it was verified the effectiveness of route exchange system by the adaptation of a recent collision accident occurred in Korean coast and suggested that route exchange system which would be carried out by the discretion of VTS center in VTS area. Finally, it proposed the new functions for outstanding services and procedures of integrating traffic organization services on coastal VTS for an effective route exchange system in Korean coastal area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.83-95
• /
• 2018

With recent technological advances in the shipbuilding industry, vessels have been improved in size and performance. As a result, an accident such as grounding, caused by a single ship-to-ship collision, could lead to a large-scale maritime disaster. Considering the seriousness of the situation, the international community has been consistently updating the standards for Electronic Navigational Chart(ENC) to improve the maritime safety. S-57, the existing ENC standard governed by the International Hydrographic Organization(IHO), includes standards for generating conventional binary-type ENC data sets. The S-57 standard, however, has not been updated since the release of Version 3.1 in December 2000. Since then, the standard has failed to reflect technological development regarding maritime spacial information, which has been consistently improving. In an effort to address this concern, the IHO designated S-100, i.e., the next-generation ENC production standard. S-100 differs from S-57 in data exchange type. Contrary to the conventional ENC standards, which use binary-type data, S-10X, based on the next-generation ENC standards, uses ENC data composed of Feature Catalogue, Portrayal Catalogue, and GML. Considering this fact, it is necessary to update S-58, the ENC validation check standard, or designate a new standard for ENC validation checks. This study is developed own software to implement validation checks for new types of data, and identified improvement points based on the test results.

• Journal of Trauma and Injury
• /
• v.22 no.1
• /
• pp.51-56
• /
• 2009

Purpose: The purpose of this study was to investigate environmental factors contributing to childhood home slip-down injuries. Methods: Among a total of 2,812 injured children in our Customer Injury Surveillance System (CISS), we performed a prospective study on 262 children with home slip-down injuries who visited the pediatric emergency department of Asan Medical Center between March 2008 and February 2009. We made a frequency analysis on parameters such as activities just before the accident, the presence of any obstacles or lubricant materials, specific home place in the home where the injuries occurred, flooring materials on which the slip-down happened, additional objects hit after slip down, the site and kind of injury, the duration of therapy, and the disposition. Results: Walking was the most common activity just before the injury. Because rooms and bathrooms were most common places in the home for slip down injuries, laminated papers/ vinyl floor coverings and tiles were the most common flooring materials used in the places where the injuries occured. Most commonly, no obstacles caused the children to slip down, but the furniture, stairs, doorsills, wetness, or soapy fluid followed after that. Over half of the children who slipped (58%) also collided with other than the floor itself after the slip-down, most common objects hit were the edges of the furniture, and doorsills, followed by stairways. The head and neck were the most commonly injured sites, and a laceration was the most common kind of injury. Most children needed less than 1 week of therapy, only 4 children (1.53%) admitted. There were no mortalities. Conclusion: The environmental factors contributing to slip-down injuries were the bathroom, laminated papers/vinyl floors, the furniture, stairs, doorsills, and wetness or soapy fluid. Especially, the furniture, stairs, and doorsills can be both primary obstacles and secondary collision objects. For the safety of our children, we must consider these factors on housing, when decorating or remodeling our house.