• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.71-80
• /
• 2011

Flying net should be installed on every 3 or 4 construction floor from 8m above ground according to the rule. In the apartment housing construction, flying net installation work has been recognized the most dangerous work among the whole works because a small mistake of labors might make their death accident. Sub-contractors specialized in flying net have been developing various flying net types. However, most works of installing flying net as working with the developed system are performed outside the apartment housing, so that the risk of fall in works of installing supports and unfolding net is still high. Furthermore, as using the previously developed flying net labors might bump into the frame or the wire rope for supporting so that it makes secondary accidents. The objective of this research is to produce the proto-type of anti-collision flying net system based on the result of problem analysis on the installation and detachment process and suggest the improved anti-collision flying net system, which is able to improve safety and field applicability by conducting field experiment and analyzing performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.499-501
• /
• 2016

In this paper, we suggest an advance method for maintaining a perceived behavior as triangle formation and preventing collision between each other in case of a flying drone. In the existing studies, the collision of the drone is only controlled by using light entered in the camera or the image processing. However, when there is no light, it is difficult to confirm the position of each other and they can collide because this system can not confirm the each other's position. Therefore, in this paper, we propose the system to solve the problems by using the distance and the relative coordinates of the three drones that were determined using the ALPS(Ad hoc network Localized Positioning System) algorithm. This system can be a new algorithm that will prevent collisions between each other during flying the drone object. The proposed algorithm is that we make drones maintaining a determined constant value of the distance between coordinates of each drone and the measured center of the drone of triangle formation. Therefore, if the form of fixed formation is disturbed, they reset the position of the drone so as to keep the distance between each drone and the center coordinates constant. As a result of the simulation, if we use the system where the supposed algorithm is applied, we can expect that it is possible to prevent malfunction or an accident due to collisions by preventing collisions of drones in advanced behavior system.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.20-26
• /
• 2018

It was a pilot study for developing an algorithm to determine the presence or absence of cervical spine injury by analyzing the severity factor of the patients in motor vehicle occupant accidents. From August 2012 to October 2016, we used the KIDAS database, called as Korean In-Depth Accident Study database, collected from three regional emergency centers. We analyzed the general characteristics with several factors. Moreover, cervical spine injury patients were divided into two groups: Group 1 for from Quebec Task Force (hereinafter 'QTF') grade 0 to 1, and group 2 for from QTF grade 2 to 4. The score was assigned according to the distribution ratio of cervical spine injured patients compared to the total injured patients, and the cut-off value was derived from the total score by summation of the assigned score of each factors. 987 patients (53.0%) had no cervical spine injuries and 874 patients (47.0%) had cervical spine injuries. QTF grade 2 was found in 171 patients (9.2%) with musculoskeletal pain, QTF grade 3 was found in 38 patients (2.0%) with spinal cord injuries, and QTF grade 4 was found in 119 patients (6.4%) with dislocation or fracture, respectively. We selected the statistically significant factors, which could be affected the cervical spine injury, like the collision direction, the seating position, the deformation extent, the vehicle type and the frontal airbag deployment. Total score, summation of the assigned each factors, 10 was presented as a cut-off value to determine the cervical spine injury. In this study, it was meaningful as a pilot study to develop algorithms by selecting limited influence factors and proposing cut-off value to determine cervical spine injury. However, since the number of data samples was too small, additional data collection and influencing factor analysis should be performed to develop a more delicate algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.318-325
• /
• 2015

Korea has very strong shipbuilding industry in the world, so many new ships are constructed in Korean shipyards. These built vessels are carrying out sea trial at sea before delivering to shipowner, and sea trial ships cause navigation risk to other passing vessels to accomplish sea trial tests as quick turning, zigzag maneuvering and crash astern etc. in traffic congestion conditions. It occurred more than 1 collision accident related sea trial for recent 5 years. It has been increased about 30% of risk because of navigation of sea trial vessel by marine traffic flow simulation. This paper analyzed marine traffic density surveyed by AIS data for 7 days, and investigated position of marine accidents for 5 years in Korean coastal waterway, it established the sea trial prohibition areas as 10/100 level of total marine traffic volume, which is considered no danger for ship operator. This analyzed maritime safety law for setting of the prohibition waters to propose the basic legal system. It makes contribution to marine pollution prevention by setting of the sea trial prohibition water to improve the ship's navigation safety.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.588-597
• /
• 2016

According to an annual industrial accident report from Ministry of Employment of Labor, among the various types of accidents, the number of accidents from construction industry increases every year with the percentage of 27.56% as of 2014. In fact, this number has risen almost 3% over the last four years. Currently, among the industrial accidents, heavy machinery causes most of the tragedy such as collision or narrowness. As reported by the government, most of the time, both heavy machinery drivers and workers were unaware of each other's positions. Nowadays, however when society requires highly complex structures in minimal time, it is inevitable to allow heavy construction equipments running simultaneously in a construction field. In this paper, we have developed Approach Detection System for excavator in order to reduce the increasing number. The imaged based Approach Detection System contains camera, approach detection sensor and Around View Monitor (AVM). This system is also applicable in a small scale construction fields along with other machineries besides excavators since this system does not require additional communication infra such as server.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.112-123
• /
• 2012

Different from general roads, intersections are the points where roads having different geometric structure and traffic operation system are met, and thereby they have complicated road structure and environmental factors. Various changes in driving patterns such as collision between vehicles approaching from roads adjacent to intersections, sudden stop of vehicles upon stop sign, quick start upon green lights kept increasing traffic accidents. It is known that traffic accidents are mainly derived from human factors. This study, in order to find out factors affecting drivers' behaviors within intersections, measured physiological responses such as brain wave, sight, driving speed, and so on by using state-of-the-art measuring device. As to concentration brain wave at individual intersections, it was found out that brain wave of testes was higher at main Arterial and accident-prone intersections compared with that of subsidiary Arterial. In addition, it was detected that drivers' visual activity was widely distributed at accident-prone intersections, meaning that it enhanced cautious driving from nearby vehicles. As to major factors causing drivers' workloads, factors from nearby vehicles such as deceleration, acceleration, lane change of nearby vehicles appeared as direct factors causing drivers' workloads, clarifying that these factors were closely related to causes of traffic accidents at intersections. Results of this study are expected to be used as basic data for evaluation of safety at intersections in consideration of physiological response of drivers.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.235-245
• /
• 2008

Since rapidly increase of tunnel with increasing of expressway, the study on safety improvement of safety device at entrance of expressway tunnels is necessary. The existence of tunnel occurs more speed reduction than an upward slope by itself, the collision accident of tunnel entrance causes heavier damage than that of general accident on the road. So, many kinds of safety devices such as poly-ethylene barrier, guard-rail are placed on the road side. But these devices affect the drivers as an obstacle. Although there are various safety devices that are placed at tunnel entrance, this study is related to following 2-cases. One is that the poly-ethylene barrier is placed and the other is that a safety devices is not placed. The reason that these two cases are selected, is that poly-ethylene barrier is usually placed at many tunnel entrances and safety devices can affect the drivers as an obstacle. This study is related to the difference of right-hand side clearance between inside tunnel and outside tunnel, too. The average difference observed car speed and VDS(vehicle detect system) speed nearby the tunnel is analysed. Through the statistical analysis of the average difference, this study suggests an alternatives on safety improvement of safety devices at entrance of expressway tunnels. It is concluded that the small difference of right-hand side clearance is desirable to drivers when a poly-ethylene barrier is placed. And when the difference of right-hand side clearance is large, no safety devices is desirable, and when the difference of right-hand side clearance is small, poly-ethylene barrier should be placed to improve safety.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.163-191
• /
• 1989

The accident of the midair collision, passengers' falling or goods' dropping occurs or supersonic aircraft make a sonic boom during their conveying passengers or goods to the destination. The accident in transmit damages the their parties on the surface or their properties. In these cases, the third parties who were harmed to their lives or properties have the right to claim damages against the air carrier who caused them. These matters have become one of the important things since aircraft conveyed passengers and goods. Therefore, it is a great concern to settle these matters by law. But the Safety of the present aircraft has been much increased and the aircraft have become larger in size. Its flight altitude became higher than before. So the relationship of the aircraft to the third parties is much different from that of the earlier aircraft. The air transport is now indispensable to our life. It is not so easy to control these matters. In the early part of 20th century, when the third parties suffered the damage, many European countries made laws on the basis of the principle of liability without fault. But each country had a variety of its own law, and different kinds of difficulties have been brought about. Accordingly, the Rome Convention on Surface Damage (1933, 1952, 1978) has been made and revised. In spite of being revised, it contains many problems, and is not carried into effect world-wide. On the other hand, there are no regulations about the compensation of the third parties damaged in Korean existing laws. In case the damage is brought about to them, it is obviously true that the settlement of the liability of compensation for damage should be made by the general principle on the tort in domestic laws. At this point, it is urgent that we make a special law though the domestic legislation as a preliminary measure before we sign the international convention to save third damaged. It is desirable that we should, for the responsibility of the air carriage for the demage of the third parties on the surface, bring in the theory of the absolute liability in view of the legislation of many conutries. As the aircraft fly in the sky, their flight always contains some danger. It is very difficult to prove the fault, and the operator should suffer the principle of liability without fault or the similiar one. In case the liability without fault will be imposed upon the operator for the damage of the third parties, it is necessary to bring in the liability protection system for the protection and up upbringing of the air carriage. The Burden of danger of the air carriage will be reduced by introducing the system. A domestic legislation measure should be necessarily taken as soon as possible as a legal security measure on these matters.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.478-485
• /
• 2018

Aids to Navigation (AtoN) is one of the marine traffic safety facilities that promotes the safety of maritime traffic and enhance ship's operational efficiency. However, functional failure of AtoN due to ship's collision or bad weather conditions leads to inconvenience or navigational risk to various users such as the ship operators. For insstance, the largest container port in Korea, Busan Port has experienced a total of 400 AtoN accidents in the past 12 years (2006-2017).Therefore, an average of 20.6 days of recovery time is required, which increases the maritime safety anxiety for AtoN users. is the objective of this study was to present the quantitative support of the users for the prevention of AtoN accidents and the improvement of the feasibility of implementing more efficient management in Korea. A survey was conducted on the users of Busan port areas to investigate general perception of AtoN in general and the accidents that have happened, and to estimate the economic value of navigational risk reduction by implementing effective AtoN management measure. Using the representative non-market valuation method for environmental or public goods known as contingent valuation method (CVM), the economic value granted to users for the AtoN services in Busan port was estimated to at least 16 billion won. Therefore, these finding could be used by AtoN managers and/or policy makers as a valuable data to identify the users' need of various AtoN services including Busan Port and to establish and implement more efficient management plan.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.14-26
• /
• 2019

For bus drivers' safe driving, a policy that analyzes the causes of the drivers' traffic accidents and then assists their safe driving is required. Therefore, the Ministry of Land, Infrastructure and Transport set up its plan to gradually expand the equipping of commercial vehicles with FCWS (Forward Collision Warning System) and LDWS(Lane Departure Warning System), from the driver-supporting ADAS(Advanced Driver Assistance Systems). However, there is not much basic research on the analysis of bus drivers' traffic accidents in Korea. As such, the time is appropriate to research what is the most necessary ADAS for bus drivers going forward to prevent bus accidents. The purpose of this research is to analyze how serious the accidents were in the different bus routes and whether the accidents were repetitive, and to give recommendations on how to support ADAS for buses, as an improvement. A model of ordered logit was used to analyze how serious the accidents were and as a result, vehicle to pedestrian accidents which directly affected individuals were statistically significant in all of the models, and violations of regulations, such as speeding, traffic signal violation and violation of safeguards for passengers, were indicated in common in several models. Therefore, the pedestrian-sensor system and automatic emergency control device for pedestrian should be installed to reduce bus accidents directly affecting persons in the future, and education for drivers and ADAS are to be offered to reduce the violations of regulations.