• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.325-329
• /
• 2001

This paper deals with a newly developed direction indicator system of a car which displays left turn and U- turn signal differently, so that the following driver can identify the Intent of the next car ahead easily. In general, when a car want to change its direction, the driver move the blinker lever below the steering wheel up or down. However, as the left turn and U-turn signal are the same, there always be the risk of rear-end collision by misinterpreting U-turn signal as left turn signal. In this paper, a new direction indicator system which differentiates left turn and U-turn signal is developed. The left turn signal is the same as before, but when a driver want to U-turn, an additional U-turn signal blinks at the rear of the car. By identifying the direction signals clearly, the developed system is expected to alleviate the risk of car accident.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.837-842
• /
• 2007

Since construction materials have been towards larger and heavier, the rate of accident associated with installation works of heavy construction materials is increasing. Installation works of heavy construction materials lead to frequent accidents, increasing the WMSDs(Work-Related Musculo-Skeletal Disorders) in construction site. In case of installation work of heavy glass ceiling, the rate of accidents such as falling and collision is increasing as well. This paper describes a ergonomic design of working platform(deck) in a glass ceiling installation robot. As well as, a design of working process is considered to accomplish an efficient installation work. As a result of the design, an installation work of heavy glass ceiling by the robot will be expected safety assurance and retrenchment of the construction cost and period.

• Journal of Navigation and Port Research
• /
• v.27 no.6
• /
• pp.645-652
• /
• 2003

A virtual vessel traffic control system is introduced to contribute to prevent a marine accident such as collision and stranding from happening. Existing VTS has its limit. The virtual vessel traffic control system consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress based on the satellite data, remotely sensed data And it could be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If environmental stress values are simulated for the ship information derived from satellite data, proper actions can be taken to prevent accidents. Since optical sensor has a high spatial resolution, JERS satellite data are used to track ships and extract their information. We present an algorithm of automatic identification of ship size and velocity. It lastly is shown that based on ship information extracted from JERS data, a qualitative evaluation method of environmental stress is introduced.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.5-11
• /
• 2012

This paper discusses the evaluation of the safety impact of the Adaptive Cruise Control (ACC) system in Korea. To evaluate the safety impact, this paper suggests an analysis method by using the test scenario and field operational test data. The test scenario is composed to represent the main component factor of the ACC system and ACC related accident situation such as rear-end collision, lane-change, and road-curvature, etc. Also, from the field operation test data, the system's potential to increase the safety can be measured ideally. Besides, field operational testdata was used to revise the expected safety impact value as Korean road conditions. By using the proposed evaluation method, enhanced safety impact of the ACC system can be estimated scientifically.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.27-32
• /
• 2012

Recently, in order to reduce traffic accident related fatalities, increasing number of studies are conducted regarding the vehicle safety enhancement devices. But very few studies about test procedures and requirements for vehicle safety systems are being carried out. Since BSD, as one of the most important safety features, is installed on a new vehicle, its performance test method has to be evaluated. Independent factors irrelevant to the device types including collision position, vehicle speed and closing speed are used to calculate test distance away from the current vehicle. Effect of roadway geometry as radius of curvature is introduced to propose possible misjudgement of following vehicle as adjacent one. The study results would be utilized to enhance the test procedure of BSD performance.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1112-1117
• /
• 2010

The intelligent safety system for level crossing which employs information and communication technology has been developed in USA and Japan, etc. But, in Korea, the relevant research has not been performed. In this paper, we analyze the cause of railway level crossing accidents and the inherent problem of the existing safety equipments. Based on analyzed results, we design the intelligent safety system which prevent collision between a train and a vehicle. This system displays train approaching information in real-time at roadside warning devices, informs approaching train of the detected obstacle in crossing areas, and is interconnected with traffic signal to empty the crossing area before train comes. Especially, we present the video based obstacle detection algorithm and verify its performance with prototype H/W since the abrupt obstacles in crossing areas are the main cause of level crossing accidents. We identify that the presented scheme detects both pedestrian and vehicle with good performance. Currently, we demonstrate developed railway crossing intelligence system at one crossing of Young-dong-seon line of Korail with Sea Train cockpit.

• Journal of Industrial Technology
• /
• v.15
• /
• pp.5-13
• /
• 1995

Natural gas, which is getting more important as a fuel, should be liquefied and shipped in a special tank. During transportation, a spill of liquefied natural gas(LNG) could occur by a collision or even an accident. As a result, violent explosion called the superheat-limit explosion(SLE) can take place in some cases, unexpectedly. Such explosion may result from the formation of a superheated liquid which has attained the superheat-limit temperature when hot(water) and cold(LNG) liquids come into contact. Natural gas mixtures can be considered as discrete light components plus continuous heavy fractions where several continuous distribution function can be adopted. This work is aiming at prediction of the superheat-limit explosion condition by suing continuous thermodynamics development of algorithm to predict.

• 연구논문집
• /
• s.25
• /
• pp.23-29
• /
• 1995

Steering column is a typical component that may injure the driver at a frontal collision accident. To protect the driver from an impact, it is very important to study the impact absorbing behaviour of steering column. The dynamic simulation were performed for the ball sleeve type impact absorbing steering column. The simulation results show similar trends to FMVSS 203 test results. Hence using the simulation program developed in this study, it is possible to predict dynamic response of steering system which is used in design modification. Impact absorbing performance of the ball sleeve type steering column with the column angle of $21^\circC$ and $26^\circC$ satisfies the safety criterion of FMVSS 203.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.9-15
• /
• 2011

This study analyzed contributing factors affecting leg injury severity in pedestrian-vehicle crashes. A Binary Logistic Regression (BLR) method was used to identify the factors. Independent variables include characteristics for pedestrian, vehicle, road, and environmental conditions. The leg injury severity is classified into two classes, which are dependent variables in this study, such as 'severe' and 'minor' injuries. Pedestrian age, collision speed, and the height of vehicle were identified as significant factors for the leg injury. The probabilistic outcome of predicting leg injury severity can be effectively used in not only deriving pedestrian-related safety policies but also developing advanced vehicular technologies for pedestrian protection.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.307-314
• /
• 1999

The potential use of ranging sensors for reducing the occurrence of accidents in real environment is explored by many companies and laboratories. Most of the sensors under investigation utilize the FMCW(Frequency Modulated Continuous Wave) waveforms. The automotive environment presents to the FMCW radar sensor a multitude of moving and fixed targets and the sensor must detect and track only the targets which may pose a threat of collision or passengers accident. The sensor must function accurately in the presence of background echoes generated by moving and fixed targets, ground reflections, atmospheric noises, including rains, fog, and, snow and noise generated within the receiver. False detection of the desired target in this environment may issue false alarms. That may be dangerous to the passenger and the vehicle. A high false alarm rate is totally unacceptable. The false alarm mechanism consists of noise peaks, crossing the threshold and the undesired response of the system to off lane targets which are not potentially hazardous to the radar equipped vehicle. This paper presents an improve technique safety performance for driver-less operation using FMCW radar sensors.