• 한국산림과학회지
• /
• 제104권2호
• /
• pp.213-220
• /
• 2015

본 연구는 부산 및 울산광역시의 토석류 유출 위험지역 총 15개소에서 토석류 유출에 영향을 미치는 산림 환경인자에 대한 인자별 발생분포비율을 분석하였다. 토심은 중(30~99 cm), 방위는 동사면과 북동사면 및 북서사면, 표고는 100~200 m, 산지평균경사는 $20^{\circ}$ 미만, 모암은 화성암, 과거 토석류 유출이 있었던 지역, 최대시우량은 50~100 mm, 1일 최대강우량은 300 m 이상, 수계밀도는 $3{\sim}4km/km^2$, 산사태 발생 가능성이 있는 경사 $20^{\circ}$ 이상의 분포비율은 20~40%와 40~60%, 산사태 위험도 2등급 이상 비율은 40~60%, 유목이 있는 상태, 사방공작물 시설이 없는 지역, 4영급, 임분이 밀한 지역, 혼효림 등의 인자가 토석류 발생에 기여하는 것으로 분석되었다.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.439-447
• /
• 2019

본 연구에서는 산사태 축소 모형 장치에 레이저 센서와 진동 센서를 설치하여 강우에 의한 사면 붕괴 시 토사의 미세 변위를 조기에 감지하여 붕괴 위험이 높은 사면에 대한 적절한 대책 마련과 사면 붕괴로 인한 피해를 최소화하기 위한 산사태 발생 시점을 예측하고자 실험을 실시하였다. 또한, 산사태 축소모형 실험을 통해 강우에 의한 토층의 거동 특성 및 간극수압과 수분과 같은 함수비 변화 특성을 분석하였다. 화강암의 풍화토로 인공사면을 조성한 다음 강우 조건을 200mm/hr와 400mm/hr로 달리하여 이에 따른 함수비(수압, 수분) 변화를 측정하고 지표 변위를 분석하기 위해 레이저 센서와 진동 센서를 적용하였으며, 영상분석을 위해 비디오 촬영을 하여 변위 발생시간을 상호 비교 분석하였다. 실험 결과 수분함량은 강우강도가 클수록 한계값 도달시간이 짧게 소요되는 것으로 나타났으며, 간극수압은 강우강도가 클수록 간극수압의 증가 시간이 짧은 것으로 나타났다. 산사태 모형실험은 현장 조건을 충분히 반영하지는 못하지만 진동 센서를 이용한 변위 발생 인지 시간을 측정한 결과 붕괴시점이 레이저 센서를 이용한 방법보다 보다 빠른 것으로 나타났다. 산사태 발생 시 센서를 이용한 지반변위 측정은 지속적인 연구를 수행할 경우 사면붕괴 예측 및 피해 저감 그리고 계측산업 활성화의 기초 자료로 활용이 가능할 것으로 판단된다.

• 한국화재소방학회논문지
• /
• 제30권1호
• /
• pp.86-95
• /
• 2016

화재는 건축구조물을 손상시키고, 궁극에는 붕괴될 수 있어 재실자 및 소방관의 생명을 위협한다. 따라서 화재 시에 구조물 내부의 재실자 및 소방관의 안전을 확보하기 위하여 구조물 안전성에 대한 과학적이고 공학적인 분석이 요구된다. 그러나 현실적으로 화재현장에서 화재손상 건축구조물에 대한 실시간 구조물 안전성 평가, 소방활동 안전구역 설정, 붕괴 우려시 소방관 철수 결정 등에 관한 과학적이고 공학적인 평가 절차 및 방법은 전무한 실정이다. 이에 내화설계 및 화재저항성평가 이론 등을 활용하여 화재손상 건축구조물에 대한 실시간 안전성평가에 관한 절차 및 방법을 제안하였다. 물론 이러한 안전성평가 절차 및 방법은 화재초기부터 실시간 화재건물 내부 상황을 가장 잘 파악 가능한 소방관에 의하여 이루어져야 한다고 판단되어 소방관이 활용가능한 안전성평가 절차 및 방법을 제안하였다.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.359-374
• /
• 2017

The seismic events in Northern Italy, May 2012, have revealed the seismic vulnerability of typical Italian precast industrial buildings. The aim of this paper is to present a seismic fragility model for Italian RC precast buildings, to be used in earthquake loss estimation and seismic risk assessment by comparing two building typologies and three different codes: D.M. 3-03-1975, D.M. 16-01-1996 and current Italian building code that has been released in 2008. Based on geometric characteristics and design procedure applied, ten different building classes were identified. A Monte Carlo simulation was performed for each building class in order to generate the building stock used for the development of fragility curves trough analytical method. The probabilistic distributions of geometry were mainly obtained from data collected from 650 field surveys, while the material properties were deduced from the code in place at the time of construction or from expert opinion. The structures were modelled in 2D frameworks; since the past seismic events have identified the beam-column connection as the weakest element of precast buildings, two different modelling solutions were adopted to develop fragility curves: a simple model with post processing required to detect connection collapse and an innovative modelling solution able to reproduce the real behaviour of the connection during the analysis. Fragility curves were derived using both nonlinear static and dynamic analysis.

• 대한조선학회논문집
• /
• 제33권2호
• /
• pp.96-110
• /
• 1996

노후선박은 부식, 피로균열 등의 구조손상을 입고 있으며, 구조손상이 심각하면 중대한 해난사고를 초래할 위험성이 높다. 선각붕괴에 의한 선박의 침몰사고를 미연에 방지하기 위하여는 구조손상에 기인된 각종 불확실성을 고려한 노후선박의 최종강도 신뢰성을 평가할 필요가 있다. 본 논문에서는 부식에 의한 선체구조부재의 판두께 감소효과를 고려하여 선체구조의 최종강도를 기준으로한 신뢰성 평가기법을 제시하였다. 이를 위해 선체구조의 부식 속도모델을 선급에서 제시하는 데이타를 바탕으로 설정하고, 부식효과를 고려한 신뢰성 한계상태방정식을 도출하였으며, 최종강도 신뢰성은 SORM (second-order reliability method)을 적용하여 계산하였다. 본 기법을 이중선체 유조선에 적용하여 선령의 증가에 따른 단면계수 및 최종강도 신뢰성의 감소특성을 고찰하였다.

• 한국농공학회논문집
• /
• 제59권5호
• /
• pp.101-108
• /
• 2017

Recently, the occurrence of landslides has been increasing over the years due to the extreme weather event. Developments of landslides monitoring technology that reduce damage caused by landslide are urgently needed. Therefore, in this study, a strain ratio sensor was developed to predict the ground behavior during the slope failure, and the change in surface ground displacement was observed as slope failed on the field model experiment. As a result, in the slope failure, the ground displacement process increases the risk of collapse as the inverse displacement approaches zero. It is closely related to the prediction of precursor. In all cases, increase in displacement and reverse speed of inverse displacement with time was observed during the slope failure, and it is very important event for monitoring collapse phenomenon of risky slopes. In the future, it can be used as disaster prevention technology to contribute in reduction of landslide damage and activation of measurement industry.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.165-173
• /
• 2019

This paper investigates the probability of failure of reinforced concrete beams for limit state of collapse for flexure and shear. The influence of randomness of the variables on the failure probability is also examined. The Indian standard code for plain and reinforced concrete IS456:2000 is used for the design of beams. Probabilistic models are developed for flexure and shear according to IS456:2000. The loads considered acting on the beam are live load and dead load only. Random variables associated with the limit state equation such as grade of concrete, grade of steel, live load and dead load are identified. Probability of failure is evaluated based on the limit state equation using First Order Reliability Method (FORM). Importance of the random variables on the limit state equations are observed and the variables are accordingly reduced. The effect of the reduced parameters is checked on the probability of failure. The results show the role of each parameter on the design of beam. Thus, the Indian standard guidelines for plain and reinforced concrete IS456:2000 is investigated with the probabilistic and risk-based analysis and design for a simple beam. The results obtained are also compared with the literature and accordingly some suggestions are made.

• 한국지진공학회논문집
• /
• 제27권2호
• /
• pp.91-99
• /
• 2023

Structural vibration induced by earthquake hazards is one of the most significant concerns in structure performance-based design. Structural hazards evoked from seismic events must be properly identified to make buildings resilient enough to withstand extreme earthquake loadings. To investigate the effects of combined earthquake-resistant systems, shear walls and five types of dampers are incorporated in nineteen structural models by altering their arrangements. All the building models were developed as per ACI 318-14 and ASCE 7-16. Seismic fragility curves were developed from the incremental dynamic analyses (IDA) performed by using seven sets of ground motions, and eventually, by following FEMA P695 provisions, the collapse margin ratio (CMR) was computed from the collapse curves. It is evident from the results that the seismic performance of the proposed combined shear wall-damper system is significantly better than the models equipped with shear walls only. The scrutinized dual seismic resisting system is expected to be applied practically to ensure a multi-level shield for tall structures in high seismic risk zones.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.175-176
• /
• 2023

The masonry structure is constructed by cement mortar binding material of brick objects and uses reinforced hardware(connected hardware or wall tie) together when building. However, over time, the corrosion of reinforced steel and the deterioration of joint mortar as well as bricks cause the risk of collapse. In particular, when the externally decorated brick wall is installed on the concrete girder for each floor, the angle bracket is not constructed or corroded, the full-layer weight load is applied to the wall of 0.5B, which is an example of full-scale or collapse. As a result of the evaluation, it was confirmed that the performance was improved compared to the existing bracket, and we plan to carry out a real-life test and long-term performance review of the building using the bracket in the future.

• Earthquakes and Structures
• /
• 제13권3호
• /
• pp.323-335
• /
• 2017

A simplified framework for the probabilistic estimation of economic losses induced by the structural vulnerability in single-story and single-bay precast industrial buildings is presented. The simplifications introduced in the framework are oriented to the definition of an expeditious procedure adoptable by government agencies and insurance companies for preliminary risk assessment. The economic losses are evaluated considering seismic hazard, structural response, damage resulting from the structural vulnerability and only structural-vulnerability-induced e]conomic losses, i.e., structural repair or reconstruction costs (stock and flow costs) and content losses induced by structural collapse. The uncertainties associated with each step are accounted for via Monte Carlo simulations. The estimation results in a probabilistic description of the seismic risk of portal-like industrial buildings, expressed in terms of economic losses for each occurrence (i.e., seismic event) that owners (i.e., insured) and stakeholders can use to make risk management decisions. The outcome may also be useful for the definition of the insurance premiums and the evaluation of the risks and costs for the owner corresponding to the insurance industrial costs. A prototype of a precast concrete industrial building located in Mirandola, Italy, hit by the 2012 Emilia earthquake, is used as an example of the application of the procedure.