• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.44-49
• /
• 2014

In this study, nanocrystalline nickel powders were cold compacted by a dynamic compaction method using a single-stage gas gun system. A bending test was conducted to measure the bonding strengths of the compacted regions and microstructures of the specimen were analyzed using a scanning electron microscopy. The specimen was separated into two parts by a horizontal crack after compaction. Density test shows that the powder compaction occurred only in the upper part of the specimen. Brittle fracture was occurred during the bending test of the compact sample. Dispersion of shock energy due to spalling highly affected the bonding status of the nanocrystalline nickel powder.

• 천문학회보
• /
• 제41권2호
• /
• pp.40.1-40.1
• /
• 2016

We present the far-ultraviolet fluorescent molecular hydrogen ($H_2$) emission map observed with FIMS/SPEAR for ~76% of the sky. The fluorescent $H_2$ emission is found to be saturated by strong dust extinction at the optically thick, Galactic plane region. However, the extinction-corrected intensity of fluorescent $H_2$ emission is found to have strong linear correlations with the well-known tracers of the cold interstellar medium, such as the E(B-V) color excess, neutral hydrogen column density N(HI), $H{\alpha}$ emission, and CO $J=1{\rightarrow}0$ emission. The all-sky molecular hydrogen column density map is also obtained using a photodissociation region model. We also derive the gas-to-dust ratio, hydrogen molecular fraction ($f_{H2}$), and $CO-to-H_2$ conversion factor ($X_{CO}$) of the diffuse interstellar medium. The gas-to-dust ratio is consistent with the standard value $5.8{\times}10^{21}atoms\;cm^{-2}mag^{-1}$, and the $X_{CO}$ tends to increase with E(B-V), but converges to the Galactic mean value $1.8{\times}10^{20}cm^{-2}K^{-1}km^{-1}s$ at optically thick regions with E(B-V)>2.0.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.53-56
• /
• 2008

This paper is to investigate the change of the period of hot weather concrete with elapse of age based on climate data. Climate data for 30 years and 5 years are used respectively. Determination of the period of hot weather concreting on architectural execution in Korea according to the specifications of AIJ, KSCE, and ACI are discussed. According to the research, the period of hot weather concreting with each specification in most regions lasts over 35 days. Compared with the period of cold weather concreting in hillside and inland area, coastal areas have shorter period in the same latitude. The period of hot weather concreting tends to decrease with high latitude. As expected, with the elapse of age, the period of hot weather concrete exhibited to decrease, especially, big city like Seoul, Busan etc had remarkably increased period by as much as a week. This is due to the global warming and industrialization effect with the elapse of age.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1093-1100
• /
• 2006

Combustion stability rating of jet injector is conducted numerically using air-injection technique in a model chamber, where air is supplied to oxidizer and fuel manifolds of the model five-element injector head. A sample F(fuel)-O(oxidizer)-O-F impinging-jet injector is adopted. In this technique, we can simulate mixing process of streams flowing through oxidizer and fuel orifices under cold-flow condition without chemical reaction. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions. From numerical data, unstable regions can be identified and they are compared with those from air-injection acoustic and hot-fire tests. The present stability boundaries are in a good agreement with experimental results. The proposed numerical method can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.710-717
• /
• 2000

Tensile and fracture toughness tests of the cold-rolled STS 304 steel plate for membrane material of LNG storage tank were performed at wide range of temperatures, 11 IK(boiling point of LNG), 153K , 193K and 293K(room temperature). Tensile strength significantly increases with a decrease in temperature, but the yield strength is relatively insensitive to temperature. Elongation at 193K abruptly decreases by 50% of that at 293K, and then decreases slightly in the temperature range of 193K to 111K. Strain hardening exponents at low temperatures are about four times as high as that at 293K. Elastic-plastic fracture toughness($J_c$) and tearing modulus($T_{mat}$) tend to decrease with a decrease in temperature. The $J_c$ values are inversely related to effective yield strength in the temperature range of 111K to 293K. These phenomena result from a significant increase in the amount of transformed martensite in low temperature regions.

• 생명과학회지
• /
• 제15권1호
• /
• pp.33-37
• /
• 2005

조릿대(S. borealis)는 다년생 초본으로 한국, 일녈, 중국의 일부에 제한적으로 분포한다. 이 종은 자가 및 타가수분에 의한 혼합번식 형태를 취한다. 전분 전기영동을 이용한 12개의 대립 유전자좌위에서 종의 교배계를 조사하였다. 교배계에서 타가 및 자가 수분, 그리고 줄기의 변형으로 영양번식이 이루어지는 매우 복잡한 혼합 방식의 교배 양식은 제한된 분포, 고산식생대 등의 환경에서 생존할 수 있는 조릿대의 생존전략과도 관련이 있을 것으로 보인다 또한 일부 자생지 파괴에 대한 유효집단의 감소가 일어나 생물자원 확보를 위한 자생지 보존이 필요하다

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권12호
• /
• pp.1779-1787
• /
• 2000

Southern and south-western Australia is a typical mediterranean environment, characterised by wet, cold winters and dry, hot summers. The evaporation rate varies significantly in summer, resulting in a high salinity of drinking water for grazing animals. In addition, a large amount of land in the cropping areas is affected by salt. Puccinellia, tall wheat grass and saltbushes have been planted to improve the soil condition and to supply feed for grazing animals. Animals grazing these areas often ingest an excessive amount of salt from soil, forage and drinking water which can reduce feed intake, increase the water requirement, depress growth and affect body composition as demonstrated in sheep. While the deer industry has been successfully developed in these regions, the potential impact of excessive salt intake on deer production is unknown. The salt tolerance has been well defined for sheep, cattle and other livestock species, but the variation between animal species, breeds within species, maturity status and grazing environments makes it impossible to apply these values directly to deer. To optimise deer production and effectively use natural resources, it is essential to understand the salt status of grazing deer and the impact of excessive salt intake on growth and reproduction of deer.

• The Plant Pathology Journal
• /
• 제16권5호
• /
• pp.290-293
• /
• 2000

The main grape producing regions in Korea were surveyed for the occurrence and relative incidence of crown gall disease on grapevine. The results of the survey showed that the disease tended to affect tetraploid cultivars, which produce a large and sweet fruit but are very weak to cold weather. Incidence of crown gall disease was high on the tetraploid cultivars, Kyoho (Gerbong), Daebong, and Black Olympia while it was low on the diploid cultivars, Cambell Early and Sheridan. The disease incidence was very high on Anseong, Cheonan, and Chincheon, where the major growing areas of tetraploid cultivars and grapevines were burried in the winter to protect from freeze injury, whereas it was low in Yungdong, Kimcheon, and Nonsan. Crown gall disease did not increased with grapevine age on both Cambell Early and Kyoho. It remained low in Cambell Early, but high for all ages on Kyoho, Galls were found on the crown region and mid part of the trunk, but more galls were on small branches and canes on Kyoho grapevines. More than one third of ZKyoho grapevines inspected had galls on multiple locations on grapevines. On Kyoho, 56.3% of the galls covered more than 50% of the crown gall disease affects severely on the cultivar.

• 천문학회보
• /
• 제43권1호
• /
• pp.45.2-45.2
• /
• 2018

CS molecule is known to be adsorbed onto dust in cold dense cores, causing its significant depletion in the center region of cores. This study is aimed to investigate the depletion of CS molecule with optically thin $C^{34}S$ molecular line observations, including significance of its differentiation depending on the evolutionary status of the dense cores. We mapped five evolved starless cores, L1544, L1552, L1689B, L694-2 and L1197 using two molecular lines, $C^{34}S$ (J=2-1) and $N_2H^+$ (J=1-0) with NRO 45 m telescope. The $H^2$ column density and temperature structures of each targets were obtained by SED fitting for Herschel continuum images and the internal number density profiles by model fitting. All of the integrated intensity maps of $C^{34}S$ show depletion holes and 'semi-ring-like' distribution, indicating that the depletion of CS is clear and general. The radial profiles of CS abundance also show significant decrease towards the core center, while $N_2H^+$ abundance is almost constant or enhanced. We find that the more evolved cores with higher $H^2$ density tend to have a stronger depletion of CS. Our data strongly support claims that CS molecule generally depletes out in the central regions of starless dense cores and such chemical differentiation is closely related to their evolution.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1133-1138
• /
• 2003

The pressure tubes, which contain high temperature heavy water and fuel, are within the core of a CANDU nuclear reactor, and are thus subjected to high stresses, temperature gradient, and neutron flux. Further, it is well known that pressure tubes of cold-worked Zr-2.5Nb materials result in hydrogen diffusion, which create fully-hydrided regions (frequently called Blister). Thus a proper investigation of hydrogen diffusion within zirconium-alloy nuclear components, such as CANDU pressure tube and fuel channels is essential to predict the structural integrity of these components. In this respect, this paper presents numerical investigation of hydrogen diffusion to quantify the hydrogen concentration for blister growth of CANDU pressure tube. For this purpose, coupled temperature-hydrogen diffusion analyses are performed by means of two-dimensional finite element analysis. Comparison of predicted temperature field and blister with published test data shows good agreement.