• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.220-229
• /
• 2010

Brewing tea with regular teapots can cause a problem in keeping the temperature of the tea. Cold weather, a cold teapot, and/or the temperature of tea leaves make tea cold, lowering the temperature of the tea leaves that can also make the flavor of the tea leaves worse. This experiment shows both the problem and the solution to the temperature problem of tea leaves. To maintain the appropriate temperature and reduce the problem, we researched and developed a special straw for tea leaves as a result of this experiment The straw consists of various filtering holes(diameter 1~2 mm) with the height of 5 mm from the very bottom of the straw. Using the straw is better to keep higher temperature, better flavor, and the smell of tea. Also, the sensory evaluation shows that the overall taste of tea is improved(p<0.05).

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.14 no.3
• /
• pp.155-162
• /
• 2009

To characterize the initiation, propagation and termination of Cochlodinium polykrikoides blooms in the southeast coastal waters of Korea, 2008, we analyzed the data set of phytoplankton composition, physical and chemical water properties, and meterological data. C. polykrikoides bloom in 2008 were long lasting and restricted to the coastal area with a low density. Our results indicate that C. polykrikoides blooms were affected by the atypical cold waters occurring in east-south coastal water in the early July. The cold water masses probably protected the free living cells of C. polykrikoides from entering into the coastal area from offshore waters as a pelagic seed population. The low density blooms of small scale established possibly by the germination of C. polykrikoides cyst in shallow coastal bottom could have not spread over because of the weak wind and low nutrient concentrations caused by severe drought in July and September.

• Journal of the Korean housing association
• /
• v.10 no.1
• /
• pp.75-84
• /
• 1999

The purpose of this study is to identify the characteristics of the thermal environment, and to analyze the relationship between the thermal reactions and the skin temperatures in the lying position in the radiant floor heating system. The results are as follows: 1) The globe temperature was nearly equal to the operative temperature in the room. 2) The floor surface temperature and the globe temperature were 26.4$^{\circ}C$ and 23.6$^{\circ}C$, respectively when the whole body temperature was at neutral point. 3) The mean temperature of the six skin parts was 31.3$^{\circ}C$ (cold thermal environment); 34.1$^{\circ}C$ (neutral thermal environment); 35.1$^{\circ}C$ (hot thermal environment).

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2003.11a
• /
• pp.41-46
• /
• 2003

In recent days, it is usual case to extend the dwelling area to the balcony which is provided by service area. But the use of the extended area can be arisen discomfort with a view point of thermal environment by excessive heat accumulation in summer and excessive cold draft in winter. In this study, the skills were reviewed to improve the thermal environment of the extended area and evaluations were carried out. Additional heat supply by heat-convector installed at the lower end of the curtain wall can improve the thermal environment of the extended area and also arise surface temperature of the curtain wall surface. And aluminum plate installed under the floor could not improve the thermal environment but it was effective to shortening the initial heating time.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.819-825
• /
• 2014

The diurnal range of temperature in korea is increasing. We know that the environment has deteriorated through report about railway damage and economic loss caused by climate. In these conditions, Monitoring device for railway must operate to support the operations and maintenance. Therefore, In this paper, COM-based monitoring device implemented using Industrial-Extended electronic components and made, We tested compliance about temperature environment of actual railway. We verified through testing about cold and dry heat of monitoring device. Used components in this product will be able to utilize the development of the railway industry of electronics.

• Journal of Environmental Science International
• /
• v.25 no.8
• /
• pp.1057-1063
• /
• 2016

The heat budget is investigated in the Gumi Reservoir of the Nakdong river. In warm climate season, solar radiation effects play a important role in the change of water temperature. The features of the surface heat balance are almost derived by the latent heat flux and the solar radiation flux. On the other hand, in cold climate season, change of heat stored in the water is mainly dominated by latent and sensible heat transfer between water and air, since flux of solar radiation and loss of outgoing long wave radiation balance approximately. For the annual averages, net flux of radiation, evaporation(latent heat) loss are dominant in the Gumi reservoir. The evaporation losses are dominant from spring to early winter. This means that the Gumi reservoir rolls like a lake of thermal medium or deep depth.

• The Korean Journal of Quaternary Research
• /
• v.19 no.2
• /
• pp.55-58
• /
• 2005

A 120-cm core recovered from Lake Hovsgol, the northern Mongolia provides evidence for climate variability since the Marine Isotope Stage 3, representing a sharp lithological change. The lowermost part of the core consists of diatom-barren calcareous silty clay without coarse sands, framboidal pyrite, and biogenic components deposited during the MIS 3. Following the last glacial maximum, in-situ moss is included in the sediments, as lake-level was retreated by cold and dry environment with low precipitation. The AMS radiocarbon ages of the plant fragments match a marked lithologic boundary between 14,060 and 14,325 $^{14}C$ yr BP. The contents of coarse sands abruptly increase, indicating probably wind-derived sandy dust or coarse grains contributed from floating icebergs. And abundant framboidal pyrite grains were deposited in an anoxic environment, as reflected by high accumulation of organic matters at a low lake stand. During the deglaciation, quantities of coarse sands, ostracod, shell fragments, framboidal pyrite, and diatom markedly varies by regional and global scale climate regimes. Some allochthonous coarse sands were probably ice-rafted debris derived from floating icebergs. A rapid increase in diatom productivity probably marked the onset of Bolling-Allerod warming. Subsequent high concentration of framboidal pyrite probably represents a dry and cold condition, such as Younger Drays events. Consistent warm period with high precipitation at Holocene is documented by diatomaceous clayey ooze without framboidal pyrite, coarse sands, and ostracod.

• Proceedings of the Korean Quaternary Association Conference
• /
• 2005.10a
• /
• pp.34-39
• /
• 2005

A 120-cm core recovered from Lake Hovsgol, the northern Mongolia provides evidence for climate variability since the Marine Isotope Stage 3, representing a sharp lithological change. The lowermost part of the core consists of diatom-barren calcareous silty clay without coarse sands, framboidal pyrite, and biogenic components deposited during the MIS 3. Following the last glacial maximum, in-situ moss is included in the sediments, as lake-level was retreated by cold and dry environment with low precipitation. The AMS radiocarbon ages of the plant fragments match a marked lithologic boundary between 14,060 and 14,325 $^{14}C$ yr BP. The contents of coarse sands abruptly increase, indicating probably wind-derived sandy dust or coarse grains contributed from floating icebergs. And abundant framboidal pyrite grains were deposited in an anoxic environment, as reflected by high accumulation of organic matters at a low lake stand. During the deglaciation, quantities of coarse sands, ostracod, shell fragments, framboidal pyrite, and diatom markedly varies by regional and global scale climate regimes. Some allochthonous coarse sands were probably ice-rafted debris derived from floating icebergs. A rapid increase in diatom productivity probably marked the onset of Bolling-Allerodwarming. Subsequent high concentration of framboidal pyrite probably represents a dry and cold condition, such as Younger Drays events. Consistent warm period with high precipitation at Holocene is documented by diatomaceous clayey ooze without framboidal pyrite, coarse sands, and ostracod.

• KIISE Transactions on Computing Practices
• /
• v.22 no.6
• /
• pp.278-283
• /
• 2016

Due to explosive increase in the amount of data produced recently, cloud storage system is required to offer high and stable performance. However, VM (Virtual Machine) migration may result in lowered storage service performance. Especially, in an environment where the host-side flash cache is used in a cloud system, the existing warmed up cache is lost and the problematic cold start begins at a new cache due to a VM migration. In this paper, we first demonstrate and analyze the cold start problem and then propose Cachemior (Cache migrator) which enables efficient hot start of the flash cache.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.968-973
• /
• 2003

As environmental restrictions have continuously become more strict, it has emphasized development of environment-friendly technologies. In cutting technology, it has been well recognized that cutting fluids might have undesirable effects on worker's health and working environment and, hence, recently there have been numerous attempts to minimize harmful effects of cutting fluids on environments. To minimize the use of cutting fluids in machining, conventional cutting fluids have been replaced with the technologies of pressurized cold air and minimum quantity lubrication(MQL). Compared with milling, turning is a continuous cutting process, where tools are continuously heated up and lack of lubricity could lead to tool wear and deteriorated surface roughness. In this study, it has been investigated how tool wear and surface roughness could be affected by cutting conditions, supply and cooling methods. The experimental results show that MQL technology is able to minimize harmful effects of conventional cutting fluids.