• 대한인간공학회지
• /
• 제36권3호
• /
• pp.169-181
• /
• 2017

Objective: The aim of this study was to explore the influence of outdoor weather conditions on subjective responses during physical activity. Background: The largest difference between indoor and outdoor conditions is the existence of the sun. The heat load from the sun has an influence on the heat gain of the human body and the intense degree of solar radiation affected thermal comfort. Method: Thirty eight people were exposed to a range of climatic conditions in the UK. Weather in England does not have extremely hot and cold temperature, and the current study was conducted under warm (summer and autumn) and cool (spring and summer) climates. Measurements of the climate included air temperature, radiant temperature (including solar load), humidity and wind around the subjects. Subjective responses were taken and physiological measurements included internal body temperature, heart rate and sweat loss. Results: This study was conducted under four kinds of environmental conditions and the environmental measurement was performed in September, December, March, and June. The values for sensation, comfort, preference, and pleasantness about four conditions were from 'neutral' to 'warm', from 'not uncomfortable' to 'slightly comfortable', from 'slightly cooler' to 'slightly warmer', and from 'neither pleasant nor unpleasant' and 'slightly unpleasant', respectively. All subjective responses showed differences depending on air temperature and wind speed, and had correlations with air temperature and wind speed (p<0.05). However, subjective responses showed no differences depending on the radiant temperature. The combined effects of environmental parameters were showed on some subjective responses. The combined effects of air temperature and radiant temperature on thermal sensation and pleasantness were significant. The combined effects of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on some subjective responses. In the case of the relationships among subjective responses, thermal sensation had significant correlations with all subjective responses. The largest relationship was shown between preference and thermal sensation but acceptance showed the lowest relationship with the other subjective responses. Conclusion: The ranges of air temperature, radiant temperature, wind speed and solar radiation were $6.7^{\circ}C$ to $24.7^{\circ}C$, $17.9^{\circ}C$ to $56.6^{\circ}C$, $0.84ms^{-1}$ to $2.4ms^{-1}$, and $123Wm^{-2}$ to $876Wm^{-2}$ respectively. Each of air temperature and wind speed had significant relationships with subjective responses. The combined effects of environmental parameters on subjective responses were shown. Each radiant temperature and solar radiation did not show any relationships with subjective responses but the combinations of each radiant temperature and solar radiation with other environmental parameters had influences on subjective responses. The combinations of metabolic rate with air temperature, wind speed and solar radiation respectively have influences on subjective responses although metabolic rate alone hardly made influences on them. There were also significant relationships among subjective responses, and pleasantness generally showed relatively high relationships with comfort, preference, acceptance and satisfaction. Application: Subjective responses might be utilized to predict thermal stress of human and the application products reflecting human subjective responses might apply to the different fields such as fashion technology, wearable devices, and environmental design considering human's response etc.

• 한국생활과학회지
• /
• 제19권1호
• /
• pp.191-201
• /
• 2010

This study attempted to examine the application of retrograded starch (RS3) isolated from rice flour into Madeleine which is easy to make, supply enough energy and micro nutrients with adequate drinks, and prevent an adult disease. This could be a popular food to anyone regardless of age and gender who avoid rice and become high value-added, processed rice foods. For this, control Madeleine was made from wheat flour and an experimental one was made from 5 or 10% rice RS3 addition as well as wheat flour. Four different types of rice were produced from Premium Ho-Pyong Rice, that is, dry milled rice flour(RFD), soaked for 8 hours and milled, followed by air-dried rice flour(RFW), rice starch(RST), and retrograded rice starch or enzyme-resistant starch(RS3). The results found were as follows: Proximate compositions were decreased with soaking to make RFW, RST and RS3, compared to RFD. RS3 had the highest L, +a and ${\Delta}E$ with the lowest +b, changing it to a dark color, explaining the need for heat control during processing. At $80^{\circ}C$, the swelling power was shown in the order of RST>RFW>RFD>RS3 and the solubility of RS3 was the highest. There were significant differences in viscosities of peak, trough, cold, breakdown and total setback of all rice samples using RVA (p<0.001). Due to the pH of RS3, the Madeleine batter became acidic (p<.01) and expanded, resulting in more air cells and open texture. With an increasing RS3 level in Madeleine, several textural attributes among 'fresh' and 'stored at room temperature' Madeleine samples were significantly different by using Texture Analyzer. While the addition of RS3 in Madeleine did not significantly affect the sensory evaluation, indicating RS3 isolated from rice as a beneficial ingredient for processed rice products.

• 대한한의학원전학회지
• /
• 제25권2호
• /
• pp.125-139
• /
• 2012

Objective : This study began with a recognition of the increase in internal disorders caused by functional impairment of the Spleen-Stomach(脾胃) due to modern dietary culture and environment. Method : Way of studying is select and analysis sentences which is include 'Stomach-Yin(胃陰)', 'Stomach-Jin(胃津)', 'Spleen-Stomach-Yin(脾胃陰)', 'Stomach-Yang(胃陽)', 'Spleen-Stomach-Yang (脾胃陽)' in Imjeungjinamuian(臨證指南醫案), and organize relevant paper. Result & Conclusion : In the history of the Spleen-Stomach Theory(脾胃學說), the theoretical mainstream was focused on On-yang(溫養), which was supplemented with methods of sweeten-cool-moisturize(甘凉濡潤) and communication-descent(通降法) by Ye, Tianshi(葉天士). Ye, Tianshi followed the academic theory of Li, Dongyuan(李東垣), putting emphasis on Stomach-gi(胃氣), along with some unique developments of his own. He specifically argued that the Spleen and Stomach be treated separately, and while accepting the methods of Li Dong-yuan in Spleen treatment, asserted that the Stomach-Yin be treated with medicinals with sweet/plain and sweet/cool/moist(甘平與甘凉濡潤) characteristics, and Stomach-Yang be kept firmly, as to prevent obstruction and reflux, by means of medicinals that communicate the Yang softly(通陽柔劑). As a result, the Yin-Yang(陰陽), Dryness-Dampness(燥濕) and Cold-Heat(寒熱) balance of the Yin-Jang (陰臟), Spleen and the Yang-Bu(陽腑), Stomach, the Stomach-Yin and Stomach-Yang was achieved both theoretically and in treatment by means of both communication and supplementation, adding accuracy to clinical application of the Spleen-Stomach Theory.

• 사상체질의학회지
• /
• 제33권1호
• /
• pp.57-89
• /
• 2021

Objectives This study is aimed to develop a standard instrument of diagnosis and assessment for the original symptom of Taeeumin. Methods 1. Based on the clinical practice guidelines, the works of Dong-mu, and the expert clinical judgment of the research team, the items to be used in the instrument of diagnosis and assessment for the original symptom of Taeeumin were extracted, and translation was proceeded in plain Korean for easy application and feasible use in daily clinical practice. As a result, candidate items for the diagnosis and assessment tool were derived. 2. An online questionnaire survey was conducted on the candidate items derived through the above process to the expert advisory group for (1) inclusion/exclusion as diagnosis and assessment index (2) evaluation of importance and (3) the validity of translation. Results & Conclusions Through survey of expert advisory group, the number of candidate items were reduced and the preliminary weights were assigned. And based on this, was developed. There were a total of 9 items for Exterior Cold[Wiwanhan] original symptom diagnosis and assessment tool, 21 items for Interior Heat[Ganyeol] original symptom, 15 items for Exterior Disease Unfavorable Patterns[Wiwanhan-paejo] original symptom, and 17 items for Interior Disease Unfavorable Patterns[Ganyeol-paejo] original symptom, and the weights were reflected in each response score so that the final total score could be calculated.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.75-81
• /
• 2016

This study applied laser surface melting process using CW(Continuous wave) Yb:YAG laser and cold-work die steel SM45C and investigated microstructure and hardness. Laser beam speed, power and beam interval are fixed at 70 mm/sec, 2.8 kW and $800{\mu}m$ respectively. Depth of Hardening layer(Melting zone) was a minimum of 0.8 mm and a maximum of 1.0 mm that exceeds the limit of minimum depth 0.5 mm applying trimming die. In all weld zone, macrostructure was dendrite structure. At the dendrite boundary, Mn, Al, S and O was segregated and MnS and Al oxide existed. However, this inclusion didn't observe in the heat-affected zone (HAZ). As a result of interpreting phase transformation of binary diagram, MnS crystallizes from liquid. Also, it estimated that Al oxide forms by reacting with oxygen in the atmosphere. The hardness of the melting zone was from 650 Hv to 660 Hv regardless of the location that higher 60 Hv than the hardness of the HAZ that had maximum 600 Hv. In comparison with the size of microstructure using electron backscatter diffraction(EBSD), the size of microstructure in the melting zone was smaller than HAZ. Because it estimated that cooling rate of laser surface melting process is faster than water quenching.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.441-443
• /
• 2005

According as CCFL(Cold Cathode Fluorescent lamp) of light source in Backlight unit for Note PC (Personal computer) is presently needed to low power consumption and long life time, the development focus of CCFL is going on the discharge gas, phosphor and electrode material. First of all, discharge voltage characteristic of CCFL is closely connected with electrode material For low discharge voltage, the characteristic of electrode material is needed to low work function, low sputtering ratio and superior manufacturing property. We developed new CCFL with Nb/Ni Clad electrode superior to conventional CCFL. Because Nb/Ni Clad electrode with Ni material and Nb material, the electrical characteristic is superior to other electrode materials. The electrode of Nb/Ni Clad is composed that Ni of outside material has superior manufacturing property and Nb of inside material has low work function. Nb/Ni Clad of new electrode material is made by process of Rolling mill at high pressure and heat treatment. We compared electrical characteristic of Nb/Ni clad electrode with conventional Mo electrode by measurement. Mo electrode and Nb/Ni Clad electrode of cup type with diameter 1.1 mm and length 3.0mm are used to this experiment. Material content of Mo electrode is Mo 100%. But, Nb/Ni Clad electrode is composed by content of Nb 40% and Ni 60%. The result of comparison measurement between new CCFL with Nb/Ni Clad electrode and conventional CCFL was appeared that CCFL with Nb/Ni Clad electrode had superior characteristic than conventional CCFL. As a result of experiment, we completed Note PC with low power consumption and long life time by application of new CCFL with Nb/Ni Clad electrode.

• 한방안이비인후피부과학회지
• /
• 제14권2호
• /
• pp.207-223
• /
• 2001

The Wonyenaejang is equivalent to the (senile)cataract in western medicine. The word cataract is used to describe the natural lens that has turned cloudy. As the natural lens of the eye becomes cloudy, it does not allow light to pass through it. Cataracts usually start as a slight cloudiness that progressively grows more opaque. As the cataract becomes more mature(increasingly opaque and dense), the retina receives less and less light. The light that does reach the retina becomes increasingly blurred and distorted. This causes gradual impairment of vision. If left untreated, cataracts can cause needless blindness. Although there are many kinds of cataracts, a senile cataract is the most common one. We chose the oriental medicine textbooks and the oriental medicine journals that were dealing with the symptoms, etiology, and internal/external treatments. The results were as follows : 1. The main causes of this disease are weak liver and kidney, burning up of the wind and heat in the liver and gall, weak spleen and stomach. 2. As the internal treatment of the Cataract, Geegukjihwangtang is mostly prescribed. 3. As the external treatment of the Cataract, (l) In the field of medicine for external application is commonly prescribed (2) In the field of drug action, frequently used treatments are as follows. emission of the evil, alleviation of fever, removal of lump of blood, and the medicine for external applications. (3) In the field of four Qi, cold medicine is commonly prescribed. (4) In the field of five tastes, bitter/hot/sweet mdicine are commonly prescribed. (5) In the field of toxicity, non-togic medicine is commonly prescribed. (6) In the field of channel distribution, most of the medicine belong to liver channel.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.93-97
• /
• 2001

A new compact, low-energy electron beam irradiator has been developed. The core-loss of silicon steels can be reduced by magnetic-domain refinement method. The irradiator was developed for the application of core-loss reduction using the method. The beam energy of the irradiator can be varied from 35 to 80 keV and the maximum current is 3mA. The irradiation area is designed to be $30\times30mm2$ now and will be upgraded to $30\times150mm2$ using a scanning magnet and scanning cone. The electron beam generated from 3 mm diameter LaB6 is extracted to the air for the irradiation of the silicon steels in the air. A special irradiation port was developed for this low-energy irradiator. A havar foil with $4.08{\mu}m$ thickness were used for the window and a cold air-cooling system keeps the foil structure by removing heat at the window. The irradiator system and its operation characteristics will be discussed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.303-306
• /
• 2006

Using a variety of chemical geothermometers we estimate the temperature of a deep geothermal reservoir in relation to thermal groundwater in the Bugok area, southern Korea, in order to assess the potential use of geothermal energy in South Korea. Thermal water at Bugok has been exploited down to about 400 m below the land surface and shows the highest outflow temperatures (up to $78{\circ}C$) in South Korea. Based on the hydrochemical data and occurrence, groundwater in Bugok can be classified into three groups: $Na-SO_4$ type thermal groundwater (CTGW) occurring in the central part (about 0.24 $km^2$) $Ca-HCO_3$ type cold groundwater (SCGW) occurring in shallow peripheral parts of CTGW; and the intermediate type groundwater (STGW). CTGW waters are typical of thermal water in the area, because they have the highest outflow temperatures and contain very high concentrations of Na, K and $SiO_2$ due to the sufficient reaction with silicate minerals in deep reservoir. Their enriched $SO_4$ was likely formed by gypsum dissolution. The major ion composition of CTGW shows the general approach to a partial equilibrium state with rocks at depth. The application of various alkali ion geothermometers yields temperature estimates in the range of 88 to $198{\circ}C$ for the thermal reservoir. Multiple mineral equilibrium calculation indicates asimilar but narrower temperature range between about 100 and $155{\circ}C$. These temperature estimates are not significantly higher than the measured outflow temperatures for CTGW Considering the heat loss during the ascent- of thermal waters, this fact may suggest that a thermal reservoir in the study area is likely located at relatively shallow depths (possibly close to the depth of preexisting wells). Therefore, we suggest a high potential for geothermal energy development around the Bugok area in southern Korea.

• 대기
• /
• 제27권3호
• /
• pp.317-329
• /
• 2017

Ocean mixed layer (OML) depth affects diurnal cycle of sea surface temperature (SST) induced by change of solar radiation absorption and heat budget in ocean. The diurnal SST variation can lead to convection over the ocean, which can impact on localized precipitation both over coastal and inland. In this study, we investigate the OML characteristics affecting the diurnal cycle of SST for the Korean Peninsula and surrounding areas. To analyze OML characteristics, HYCOM oceanic mixed layer depth (MLD) and wind field at 10 m from ERA-interim during 2008~2016 are used. In the winter, MLD is deeply formed when the strong wind field is located on perpendicular to continental slope over deep seafloor areas. Besides, cooling SST-induced vertical mixing in OML is reinforced by dry cold air originated from Siberia. The OML in summer is shallowly distributed about 20 m. In order to estimate the impact of OML model in high resolution NWP model, four experimental simulations are performed. At this time, the prognostic scheme of skin SST is applied in NWP to simulate diurnal SST. The simulation results show that CNTL (off-OML) overestimates diurnal cycle of SST, while EXPs (on-OML) indicate similar results to observations. The prediction performance for precipitation of EXPs shows improvement compared with CNTL over coastal as well as inland. This results suggest that the application of the OML model in summer season can contribute to improving the prediction for performance of SST and precipitation over coastal area and inland.