• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.1051-1054
• /
• 2002

Environmentally conscious machining and technology have been taking more and more important position in machining process. Since cutting fluid has some impact on environment, many researches are being carried out to minimize the use of cutting fluid. It can be Increased the environmental pollution through not using coolant any more or minimizing it. In this study, the cooling effects of cutting methods using the compressed cold air, dry cutting and cutting fluid will investigate in the blade machining. In order to examine the characteristics of cutting and tool in the environmentally conscious machining, this work investigates experimentally the degree of tool wear, cutting force and characteristics of surface roughness in relation to machining conditions and cooling methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.385-388
• /
• 1997

As the environmental regulations become stricter, new machining technologies are being developed which takes envi ronmenta 1 aspects into account . Since cut t ing oi I has some impact on environment. many researches are being carried out to minimize the use of cutting oi I. The methods for minimizing cutting oil usage includes the following techniques: I ) Cooling of tools and work piece. 2) Useage of compressed cooling air for the removal of chip. 3) Minimal useage of environment-friendly vegetable cutt:ngoiI for lubrication between chip and tools. Since the turning machine is continuous, tools are under constant thermal load and tool wear increases as the lubricative performance degrades. Also surface roughnesses have a direct influence on turning. In order to examine the characteristics of turningmachining, this work investigates experimentally the degree of tool wear and characteristics of surface roughness in relation to machining conditions, supply methods, and cooling methods.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.285-296
• /
• 2005

In order to reduce the compression power and to use the overall energy contained in LNG effectively, a combined cycle is devised and simulated. The combined cycle is composed of two cycles; one is an open cycle of liquid/solid carbon dioxide production cycle utilizing LNG cold energy in $CO_2$ condenser and the other is a closed cycle gas turbine which supplies power to the $CO_2$ cycle, utilizes LNG cold energy for lowering the compressor inlet temperature, and uses the heating value of LNG at the burner. The power consumed for the $CO_2$ cycle is investigated in terms of a production ratio of solid $CO_2$. The present study shows that much reduction in both $CO_2$ compression power (only $35\%$ of power used in conventional dry ice production cycle) and $CO_2$ condenser pressure could be achieved by utilizing LNG cold energy and that high cycle efficiency ($55.3\%$ at maximum power condition) in the gas turbine could be accomplished with the adoption of compressor inlet cooling and regenerator. Exergy analysis shows that irreversibility in the combined cycle increases linearly as a production ratio of solid $CO_2$ increases and most of the irreversibility occurs in the condenser and the heat exchanger for compressor inlet cooling. Hence, incoming LNG cold energy to the above components should be used more effectively.

• Korean Journal of Food Science and Technology
• /
• v.47 no.2
• /
• pp.224-232
• /
• 2015

The effects of cold plasma (CP) treatments on the physicochemical and biodegradable properties of a corn biomass-containing polyester (CBPE) film were studied. The CBPE film was treated with CP generated by $N_2$, $O_2$, He, Ar, or dry air at 400-900 W and 667 Pa for 10-40 min. The glass transition temperature of the CBPE film ($-30.2--28.6^{\circ}C$) was not affected by the CP treatment, while the elastic modulus and water vapor permeability decreased (p<0.05). The ink printability was improved by the treatment and the improved printability was maintained during storage for 56 days at room temperature. Roughness of the film increased after treatments and the level of roughness appeared to increase during storage. Heat and microbial biodegradability of the CBPE film was improved by the air-CP treatment (p<0.05). These results have demonstrated the potential of applying CP treatments to improve the flexibility, printability, and biodegradability of CBPE films.

• Journal of the Korean earth science society
• /
• v.30 no.5
• /
• pp.529-549
• /
• 2009

In 2007, just after the recession of the Changma, anomalously long rainy period (from July 30 to August 15) occurred in Korea. To identify the cause of the sustained rainy period, we performed synoptic analysis and the associated air motions. The behavior of each air parcel trajectory associated with atmospheric motion was then investigated. As a result, three particular phenomena occurring at latitudes lower than $40^{\circ}N$ were discovered. First, a mass of relatively cold air, referred to as E, made a deep intrusion from $20^{\circ}N$ to $60^{\circ}N$. Second, this intrusion was accompanied by another mass of air called dE. It was colder and drier than E and originated from the mid-troposphere over the tropical ocean. Third, dE and E rotated clockwise three times over a period of 17 days over the Northwestern Pacific and blocked the westerly waves imbedded in the zonal flow from propagating. Two additional phenomena were observed at latitudes higher than $40^{\circ}N$. First, the cold core system, while approaching from the west with low geopotential values at its center, was stagnated over Shanxi China. It enhanced the northward intrusion of dE and E, and then diminished. The subsequent low system showed similar evolution as the first one. Second, a warm core anticyclone was formed over Lake Baikal, blocking the westerlies for 13 days and contributed to the persistent northward incursion of warm moist air. Moreover, a horizontally extended intrusion of upper level clouds from the tropics to $50^{\circ}N$, which may be interpreted as a tropical plume, was found around the end of the period (from August 12 to 15, 2007) with successive tropical nights over Korea.

• Journal of Power System Engineering
• /
• v.11 no.2
• /
• pp.20-25
• /
• 2007

The performance of air-to-air heat exchanger has been investigated with rotating porous plates newly developed in this study. With an equal interval of 18 mm, the rotating porous plates are installed inside the heat exchanger where the hot and cold airs enter at opposite ends. When flowing in opposite directions by the separating plate installed in the center of the rotating porous plates, the airs give and receive the heat each other. Dry bulb temperature is set by adjusting heat supply at heater. In order to measure the temperature distribution of the hot air side inside heat exchanger, the thermocouples are inserted between the plates. The first location of thermocouple is 10mm downstream from the inlet of heat exchanger, and succeeding ten locations are aligned at an equal interval of 18mm. From the experiment of air-to-air heat exchanger with the rotating porous plates, the heat transfer rate increased as both air flow rate and RPM of the rotating porous plate increased. It was found that the overall heat transfer coefficient increased with the increase in RPM of porous plate at the conditions of the same air flow rate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.99-107
• /
• 1998

A test on venturi-type premixer of ASE120 engine combustor has been performed to evaluate its mixing performance. Cold air was supplied into the premixer through the fuel nozzle and mixed with the hot air from the compressor exit. The measured temperature of the mixed air was used to evaluate the mixedness. DOE(Design of Experiment) technique was utilized to make a test matrix of variables and to determine the optimum combination of variables, which was verified through a confirmation test.

• KIEAE Journal
• /
• v.6 no.2
• /
• pp.43-50
• /
• 2006

A Double Facade System(DFS) is well known as an innovative solution of ecological facade in the west european countries. There are more than 200 various realized DFS in Germany. At the same time, the korean engineers have researched to find out the physical advantages of DFS in the moderate korean climate, which has a very humid summer with high temperature and a dry winter with low temperature. For example, the monthly mean temperature in Korea comes up to 28K, while that in Germany comes up to only 19K. That is, why a other solution of DFS is needed in Korea. This study has experimented the physical performance of the natural ventilation in the heating period. The preheating function of the cold air by DFS can improve no doubt the performance of the natural ventilation at the cold season as well as spring and autumn. The physical difference between single and double facade on natural ventilation has been tested at the newly constructed laboratory, which can turn $360^{\circ}$ to confirm the characteristic of a facade with the various directions. The results show the natural ventilation of the DFS has definitely much more comfortable than that of the single facade system. The air velocity of the inflow as well as the air temperature in the DFS provide a more stable condition than in the SFS. The theoretical limit(air velocity max 0.2m/s, air temperature min. $18^{\circ}C$, temperature difference between 100mm and 1700mm height max. 3K) on the indoor comfortableness doesn't go over in the DFS. On the other hand, the SFS showed an unstable condition with an excess of comfortableness limit on air velocity as well as temperature. In view of the researching results so far achieved, the research came to a conclusion, that the DFS can provide a more comfortable indoor condition by the preheating in the heating period than a SFS, and the period of natural ventilation in winter time could be definitely increased at the DFS.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.3
• /
• pp.157-162
• /
• 2001

"Hwasan 102" is a new cold-tolerant Italian ryegrass(Lo1ium rnultiflorum L.) variety developed by theNational Livestock Research Institute(NLRI) in 1999. Having cold tolerance in Italian ryegrass is an importantfor enlargement of cultivation area and increase of productivity in Korea. To develop the cold-tolerant varietyof Italian ryegrass, cold-tolerant clones survived under - 13- - 14$^{\circ}$C of minimum average air temperature(MAAT) in January were selected at Dun Nae, Kwangwon Province in 1993. Five of selected clones werepolycrossed for seed production by NLRI, RDA, in 1995."Hwasan 102" was tetraploid variety, dark green in leaf color and broad in flag leaf width. Also it hassemi-prostrate and medium growth habit in late autumn and in early spring, respectively. "Hwasan 102" withlow plant height at harvesting time was excellent in lodging tolerance. First heading date of "Hwasan 102"was 19th May, it was similar to that of Marshall. Expecially, "Hwasan 102" survived about 60% under - 10- - 12$^{\circ}$C of MAAT in January, so it could be cold-tolerant variety that can be safely cultivated in regionshigher than -9'C of MAAT in January. Compared with Marshall, "Hwasan 102" showed 8% higher freshyield (59.2MT per ha) but it showed 2% lower dry matter yield (9.6MT per ha). Higher IVDMD and TDNand lower ADF and NDF were observed in "Hwasan 102" than those of Florida 80 and Marshall in Foragequality.(Key words : Italian ryegrass, Cold tolerance, New variety "Hwasan 102")rshall in Foragequality.(Key words : Italian ryegrass, Cold tolerance, New variety "Hwasan 102")san 102&")ot;)

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.968-973
• /
• 2003

As environmental restrictions have continuously become more strict, it has emphasized development of environment-friendly technologies. In cutting technology, it has been well recognized that cutting fluids might have undesirable effects on worker's health and working environment and, hence, recently there have been numerous attempts to minimize harmful effects of cutting fluids on environments. To minimize the use of cutting fluids in machining, conventional cutting fluids have been replaced with the technologies of pressurized cold air and minimum quantity lubrication(MQL). Compared with milling, turning is a continuous cutting process, where tools are continuously heated up and lack of lubricity could lead to tool wear and deteriorated surface roughness. In this study, it has been investigated how tool wear and surface roughness could be affected by cutting conditions, supply and cooling methods. The experimental results show that MQL technology is able to minimize harmful effects of conventional cutting fluids.