• Korean Journal of Materials Research
• /
• v.8 no.4
• /
• pp.354-358
• /
• 1998

Effect of cold drawing ratio and aging time on the hardness of lnconel 718 wire aged at 11l6K were investi¬gated by hardness measurement and scanning & transmission electron microscopy. Hardness which was 245Hv in as¬solution treated condition increased very rapidly to 450Hv as cold drawing ratio increased to 50%. The hardness in the early stage of aging was increased by the precipitation of $\gamma^{'}$ and $\gamma^{'}$ phases and after the peak hardness, the hardness was decreased by the transformation of $\gamma^{'}$ phase to $\delta$ phase. The time to reach peak hardness during aging appeared to be reduced with the increase of cold drawing ratio, and those times were 30, 10, and 5 minutes for 0, 30 and 50% cold drawn materials, respectively. For the 50% cold drawn material. $\gamma^{'}$ and $\gamma^{'}$ were precipitated by aging for 5 minutes at 1116K. The hardness in the same material was largely decreased under the initial hardness by the recrystallization.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.680.2-680.2
• /
• 2006

• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.485-489
• /
• 2006

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.6
• /
• pp.594-599
• /
• 2012

The objective of this study was to determine the processing conditions for salt dried rockfish Sebastes schlegeli by sun drying and cold-air drying, as measured by alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) activity. We processed salt dried rockfish samples. The salinity of rockfish samples was within 1% following salting with 25% salt brine for 3 h. The moisture content of salt dried rockfish was found to reduce linearly from 70.12 to 39.5 g/100 g over the same time interval. The water activities of salt dried rockfish by sun and cold-air drying were 0.94 and 0.87, respectively, after three days of drying. Acid values (AV) were 10.71 and 5.96 mg KOH/g, respectively, after the three day drying period. The ADH activity in a water extract from salt dried rockfish following sun and cold-air drying for 24 h was 228.5% and 226.1% at 13.3 mg/mL, respectively, and was higher than that when drying lasted for 48 and 72 h. The ALDH activity was not affected but both ADH and ALDH activity tended to decrease as the drying time increased from 24 to 72 h. The conditions of processing for the best quality of salt dried rockfish were determined to be drying with a cold-air system for 24 h. These results indicated that water extracts from salt dried rockfish have valuable biological attributes owing to the metabolizing of alcohol and can provide useful information for the design of drying systems for salt dried rockfish.

• The KIPS Transactions:PartB
• /
• v.15B no.4
• /
• pp.301-306
• /
• 2008

Recently, various health care methods for infants have been suggested in the impending era of low birth rate society. We propose, in this context, an early diagnosis method for common infant respiratory diseases. Particularly, the method is regarding infant cold and infant pneumonia. Firstly, sounds of infant crying, only expressing means of infants, among the infant cold group and the infant pneumonia group are compared and examined to find the differences from those among the healthy infant group. For this, the link between infected organs and articulatory organs is investigated. Also, resulting wave forms and frequency bandwidths among each group are compared and analyzed, by using the spectrum for a component voice, to diagnose the infant cold and pneumonia. Finally, the effectiveness of this method is verified through the experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.574-577
• /
• 2007

While disk can be overwritten on updating data, because flash memory can not be overwritten on updating data, new data are updated in new area. If data are frequently updated, garbage collection, which is achieved by erasing blocks, should be performed to reclaim new area. Hence, because the number of erase operations is limited due to characteristics of flash memory, every block should be evenly written and erased. However, if data with access locality are processed by cost benefit algorithm with separation of hot block and cold block, though the performance of processing is high, wear-leveling is not even. In this paper, we propose CB-MB (Cost Benefit between Multi Bank) algorithm in which hot data are allocated in one bank and cold data in another bank, and in which role of hot bank and cold bank is exchanged every period. CB-MB showed that its performance was similar to that of others for uniform workload, however, the method provides much better performance than that of others for workload of access locality.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.759-764
• /
• 2016

This purpose of this study was to determine the best enrichment medium for rejuvenating and recovering Salmonella placed in cold temperature prior to the employment of the gold biosensor combined with a light microscopic imaging system. A mixture of nalidixic-resistant Salmonella Typhimurium and Enteritidis were inoculated onto chicken (1,000 CFU/chicken). After cold injury at $4^{\circ}C$ for 24 hr, Salmonella on chicken was enriched for 6 hr with six non-selective media including buffered peptone water broth, lactose broth, brain heart infusion broth (BHI), universal pre-enrichment broth, nutrient broth, and tryptic soy broth, and five selective media including brilliant green broth (BG), rappaport-vassiliadis R10 broth, selenite cystine broth, selenite broth, and tetrathionate brilliant green broth (TBG) for the comparison of Salmonella growth. Various concentrations of Salmonella (10, 50, 100, 500, and 1,000 CFU/chicken) were then enriched for 6 hr in both BHI and BG media to select the best media. BHI was selected as the most effective non-selective enrichment medium, while BG was selected as the most effective selective enrichment medium. Finally, BHI medium was selected as the most efficient enrichment medium for Salmonella growth injured from cold temperature during processing or storage.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.3
• /
• pp.133-140
• /
• 2002

Site-specific minimum temperature forecasts are critical in a short-term decision making procedure for preventive measures as well as a long-term strategy such as site selection in fruits industry. Nocturnal cold air pools frequently termed in mountainous areas under anticyclonic systems are very dangerous to the flowering buds in spring over Korea, but the spatial resolution to detect them exceeds the current weather forecast scale. To supplement the insufficient spatial resolution of official forecasts, we developed a GIS - assisted frost risk assesment scheme for using in mountainous areas. Daily minimum temperature data were obtained from 6 sites located in a 2.1 by 2.1 km area with complex topography near the southern edge of Sobaek mountains during radiative cooling nights in spring 2001. A digital elevation model with a 10 m spatial resolution was prepared for the entire study area and the cold air inflow was simulated for each grid cell by counting the number of surrounding cells coming into the processing cell. Primitive temperature surfaces were prepared for the corresponding dates by interpolating the Korea Meteorological Administration's automated observational data with the lapse rate correction. The cell temperature values corresponding to the 6 observation sites were extracted from the primitive temperature surface, and subtracted from the observed values to obtain the estimation error. The errors were regressed to the flow accumulation at the corresponding cells, delineating a statistically significant relationship. When we applied this relationship to the primitive temperature surfaces of frost nights during April 2002, there was a good agreement with the observations, showing a feasibility of site-specific frost warning system development in mountainous areas.

• Laser Solutions
• /
• v.11 no.2
• /
• pp.15-19
• /
• 2008

Electron beam (EB) weldability of pure grade Nb sheet was studied. One of Nb sheets was as-annealed and the other was cold rolled. Microstructures, Vickers hardness, and transverse weld tensile test were carried out for the base metal, the heat affected zone (HAZ) and weld metal. In the case of the EB welds made using the annealed Nb sheeet, fine equiaxed grains and coarse grains were dominant at the base metal and the HAZ, respectively, and columnar grains were observed at the weld metal. For the EB welds made using the cold rolled Nb sheet, elongated grains in the rolling direction at the base metal, and the microstructures of the weld metal and the HAZ are similar to those of the EB welds made using the annealed Nb sheet, respectively. For both annealed and cold rolled Nb sheet, the width of the HAZs are unusually wide in spite of using high density heat source, i.e. electron beam, and the grain sizes of both HAZs are similar. When tensile test was carried out using the transverse weld specimens, the failure occurred at the HAZ for both EB welds made using Nb sheets annealed and cold rolled, respectively and the tensile strengths of both specimens were 161MPa. Vickers hardness of EB welds made using annealed Nb was 56-57 Hv at both base metal and weld metal, 52-53 Hv at the HAZ. On the other hand, Vickers hardness of EB welds made using cold rolled Nb was 97-99 Hv at the base metal, but the hardness values of weld metal were similar to those obtained at the weld metal of annealed Nb.

• Transactions of Materials Processing
• /
• v.23 no.2
• /
• pp.95-102
• /
• 2014

The under-drive brake piston is an important component in automotive transmissions. It changes the velocity by controlling the gear ratio. It has been traditionally manufactured by hot forging. Recently, there has been an effort to replace this traditional manufacturing method with cold forging in order to improve the dimensional accuracy and decrease the surface roughness. Cold forging uses a smaller amount of initial material and also has a shorter cycle time since the forged surface can be the final surface without the need of post-processing such as machining or grinding. In the current study, finite element analysis was conducted to evaluate a process design using an initial plate with reduced thickness. This smaller thickness decreases the amount of material needed for the part as well as the machining to produce the final product.