• 방송공학회논문지
• /
• 제18권2호
• /
• pp.149-158
• /
• 2013

본 논문에서는 실사 컬러 영상을 이용하여 디지털 컬러 홀로그램 비디오를 생성하는 시스템을 제안한다. 전체 시스템은 크게 영상의 획득을 위한 카메라 시스템과 각종 영상처리를 위한 소프트웨어로 구성된다. 카메라 시스템은 수직리그에 RGB 카메라와 깊이 카메라로 장착한 형태이고, 두 이종 영상 데이터의 시점을 일치시키기 위해서 파장에 따라 투과율이 다른 콜드 미러(cold mirror)를 이용하였다. 소프트웨어는 획득된 영상을 가공하고 서비스하기 위한 엔진들과 GPGPU(general-purpose computing on graphics processing unit)를 이용한 컴퓨터 생성 홀로그램(computer-generated hologram, CGH)으로 구성된다. 각 알고리즘들은 C/C++ 및 CUDA로 구현되었고, 각 엔진들은 LabView 환경에서 통합되었다. 제안한 시스템은 약 6K개의 광원에 대해서 초당 약 10프레임의 컬러 홀로그램을 생성할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.175-178
• /
• 2008

플래시 메모리에서 읽기 작업은 속도도 빠르고 제약이 없으나 데이터 변경 시에는 덮어쓰기(overwrite)가 되지 않아 해당 데이터를 새로운 영역에 쓰고 이전에 존재하던 데이터는 무효 시켜야한다. 무효화시킨 데이터는 가비지컬렉션을 통해 지움 연산을 수행해야 한다. 지역 접근성을 가지는 데이터에 대해 가비지컬렉션을 통해 클리어 시킬 대상 목록을 선정할 때 cost-benefit 방법을 사용하면 성능은 좋으나 wear-leveling이 나빠지는 문제점이 있다. 본 연구에서는 wear-leveling을 개선하기 위해 플래시 메모리를 hot 데이터 그룹들과 cold 데이터 그룹들의 다수의 그룹으로 분할한 후 데이터를 배치하고 주기적으로 hot 데이터 영역과 cold 데이터 영역을 교체함으로써 wear-leveling과 성능을 개선하였다.

• Journal of Microbiology and Biotechnology
• /
• 제30권2호
• /
• pp.187-195
• /
• 2020

To understand the molecular mechanism involved in the survivability of cold-tolerant lactic acid bacteria was of great significance in food processing, since these bacteria play a key role in a variety of low-temperature fermented foods. In this study, the cold-stress response of probiotic Lactobacillus plantarum K25 isolated from Tibetan kefir grains was analyzed by iTRAQ proteomic method. By comparing differentially expressed (DE) protein profiles of the strain incubated at 10℃ and 37℃, 506 DE proteins were identified. The DE proteins involved in carbohydrate, amino acid and fatty acid biosynthesis and metabolism were significantly down-regulated, leading to a specific energy conservation survival mode. The DE proteins related to DNA repair, transcription and translation were up-regulated, implicating change of gene expression and more protein biosynthesis needed in response to cold stress. In addition, two-component system, quorum sensing and ABC (ATP-binding cassette) transporters also participated in cell cold-adaptation process. These findings provide novel insight into the cold-resistance mechanism in L. plantarum with potential application in low temperature fermented or preserved foods.

• 한국정보통신학회논문지
• /
• 제12권1호
• /
• pp.108-114
• /
• 2008

플래시 메모리는 디스크와는 달리 덮어쓰기가 불가능하므로, 새로운 데이터는 새로운 영역에 갱신이 된다. 데이터가 빈번히 변경되면 새로운 영역을 확보하기 위해 가비지 컬렉션을 통하여 데이터를 지우게 되는데, 이때 지움(erase) 연산을 수행 할 수 있는 회수가 플래시 메모리의 특성에 의해 일정 회수로 제한을 받게 되므로 플래시 메모리의 모든 블록은 고르게 쓰여지고 지워져야 한다. 그러나 지역 접근성을 가지는 데이터를 Cost-benefit 방법으로 처리하면 성능은 좋으나 wear-leveling은 매우 나빠지는 문제점이 있다. 본 논문에서는 wear-leveling을 개선하기 위해 멀티 뱅크에서 하나의 뱅크는 cold 데이터를 다른 뱅크는 hot 데이터를 할당하고, 시간이 흐름에 따라 일정주기로 cold 뱅크와 hot 뱅크를 교환하는 CB-MB(Cost Benefit between Multi Bank) 방법을 제안하고 성능을 평가하였다. CB-MB방법은 hot 데이터와 cold 데이터를 블록단위로 분리하여 관리하는 Cost-benefit방법에 비해 성능에 있어 30% 성능향상을 보이고 wear-leveling측면에서 1/3이하로 표준편차를 줄였다.

• 소성∙가공
• /
• 제27권6호
• /
• pp.370-378
• /
• 2018

Cold forging, carried out at room temperature, leads to high dimensional accuracy and excellent surface integrity as compared to other forging methods such as warm and hot forgings. In the cold forging process, WC-Co (Tungsten Carbide-Cobalt) alloy is the mainly used material as a core dies because of its superior hardness and strength as compared to other structural materials. For cold forging, die life is the most significant factor because it is directly related to the manufacturing cost due to periodic die replacement in mass production. To investigate die life of WC-Co alloy for cold forging, mechanical properties such as strength and fatigue are essentially necessary. Generally, uniaxial tensile test and fatigue test are the most efficient and simplest testing method. However, uniaxial tension is not efficiently application to WC-Co alloy because of its sensitivity to alignment of the specimen due to its brittleness and difficulty in thread machining. In this study, shape of specimen, tools, and testing methods, which are appropriate for uniaxial tensile test for WC-Co alloy, are proposed. The test results such as Young's modulus, tensile strength and stress-strain curves are compared to those in previous literature to validate the proposed testing methods. Based on the validation of test results it was concluded that the newly developed testing method is applicable to other cemented carbides like Titanium carbides with high strength and brittleness, and also can be utilized to carry out fatigue tests for further investigation on die life of cold forging.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.668-670
• /
• 1999

We have developed a automatic surface inspection system for cold Rolled strips in steel making process for several years. We have experienced the various kinds of surface inspection systems, including linear CCD camera type and the laser type inspection system which was installed in cold rolled strips production lines. But, we did not satisfied with these inspection systems owing to insufficient detection and classification rate, real time processing performance and limited line speed of real production lines. In order to increase detection and computing power, we have used the Dark Field illumination with Infra_Red LED, Bright Field illumination with Xenon Lamp, Parallel Computing Processor with Area typed CCD camera and full software based image processing technique for the ease up_grading and maintenance. In this paper, we introduced the automatic inspection system and real time image processing technique using the Object Detection, Defect Detection, Classification algorithms. As a result of experiment, under the situation of the high speed processed line(max 1000 meter per minute) defect detection is above 90% for all occurred defects in real line, defect name classification rate is about 80% for most frequently occurred 8 defect, and defect grade classification rate is 84% for name classified defect.

• 소성∙가공
• /
• 제5권3호
• /
• pp.219-231
• /
• 1996

The current five-stage cold extrusion process to produce an axle-housing is investigated for the purpose of improved process. The main goal of this study is to obtain an appropriate reduced process sequence which can produce the required part most economically without tensile crack-ing workpiece buckling and overloading of the tools. The current process sequence is simulated and design criteria are examined. during the simulation several remeshings are done due to severe mesh distortions, Based on the results of simulations of the current five-stage process, design strategy for improving the process sequence are developed using the thick hollow pipes. The finished product of an axle-housing is produced in two operations and one annealing treatment while the conventional sequence consists of five operations and one annealing treat-ment. Also die loads of the new process are compared with those of the current one.

• 소성∙가공
• /
• 제7권5호
• /
• pp.426-431
• /
• 1998

This study is concerned with cold repressing of sintered preforms by the rotary forging process. An experiment has been carried out using the rotary powder forging press(500kN) which was designed and constructed in the authors' laboratory. The effect of process variables and aspect ration of sintered preform on the densification behavior during the rotary repressing was studied by several mechanical test such as working force hardness distribution density and microstructures of the specimens. Since a higher densification can be achieved by applying the rotary repressing on presinted preforms it was successively demonstrated that the cold rotary powder forging is an effective operation to improve quality of P/M parts.

• 소성∙가공
• /
• 제8권1호
• /
• pp.108-115
• /
• 1999

In this paper, the analysis of cold forging in final state has been performed by using rigid-plastic FEM. For the analysis, the geometry and flow stress of the workpiece are required. One method to obtain the geometry is measurement of that made from experimet. To evaluate the flow stress, average effective strain is calculated from the load-stroke diagram by using energy method. The numerical test performed to show the validity of propose method. The analysis of PFIR, the precision forging of spurgear with inside relif, is performed.

• 소성∙가공
• /
• 제8권4호
• /
• pp.384-392
• /
• 1999

In metal forming, there are problems with recurrent geometric characteristics without explicitly prescibed boundary conditions. In such problems, so-called recurrent boundary conditions must be introduced. In this paper, as a practical application of the proposed method, the precision cold forging of a helical gear has been simulated by a three-dimensional rigid-plastic finite element method and compared with the experiment. The application of recurrent boundary conditions to helical gear forging analysis is proved to be effective and valid. the elastic stress analysis of the die for helical gear forging has been calculated by using the nodal force at the final stage obtained from the rigid-plastic finite element analysis. In order to obtain more precise gear products, the elastic analysis of the die after release of punch and the elastic spring-back analysis of product after ejection have been performed, and the final dimension of the computational product has been in good agreement with that of the experimental product.