• 소성∙가공
• /
• 제24권4호
• /
• pp.293-298
• /
• 2015

A safety vent is crucial to protect its user from unpredictable explosions caused by increasing internal pressure of the lithium-ion batteries. In order to prevent the explosion of the battery, a safety vent rupture is required when the internal pressure reaches a critical value. In conventional manufacturing, the cap plate and the safety vent are fabricated separately and subsequently welded to each other. In the current study, a manufacturing process including a backward extrusion and coining process is suggested to produce an integral safety vent which also has the benefit of increasing production efficiency. FE simulations were conducted to predict the rupture pressure and to design the safety vent using a ductile fracture criterion and the element deletion method. The critical value, C, in the ductile fracture criterion was obtained from uniaxial tensile tests with an annealed sheet of 1050-H14 aluminum alloy. Rupture tests were preformed to measure the rupture pressure of the safety vent. The results met the required rupture pressure within 8.5±0.5 kgf/cm². The simulation results were compared with experimental results, which showed that the predicted rupture pressures are in good agreement with experimentally measured ones with a maximum error of only 3.9%.

• 한국산업정보학회논문지
• /
• 제12권3호
• /
• pp.1-9
• /
• 2007

본 논문에서는 주화나 메달의 제조 공정에서 극인의 수명을 향상시키는 제조 조건에 대하여 연구하였다. 먼저, 경계요소법을 이용하여 응력의 주요 집중부를 찾아내어 실제 압인 실험에서 극인의 최초 균열 위치가 일치하는지를 검증하여 이를 금형의 수명을 측정하는 기준으로 사용하였다. 주화생산 조건의 요소 중, 완제품인 주화의 정해진 규격과 문양의 심도를 만족하는 범위 내에서 압인 공정의 주요 변수인 압인력과 칼라 및 소전의 크기 변화에 따른 금형의 수명을 비교하였다. 그 결과, 칼라와 소전의 직경을 조절하고 이 조건에 적합한 압인력을 사용하면 실험 대상 주화에서 극인의 수명이 최대 60% 증가하는 효과를 볼 수 있음을 보였다.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2001년도 International Conference CALS/EC KOREA
• /
• pp.105-109
• /
• 2001

성형의 종류 ◈금속 성형 ㆍ 스탬핑(Stamping) ㆍ 정밀 블랭킹(Fine Blanking) ㆍ 딥 드로잉(Deep Drawing) ㆍ 다이캐스팅(Die Casting) ㆍ 인베스트먼트 주조(Investment Casting) ㆍ 분말 야금(Power Metallurgy) ㆍ 인발(Wire Drawing) ㆍ 압출(Extrusion) ㆍ 단조(Forging) ㆍ ㆍ코이닝(Coining) ㆍ... ◈비금속 성형 ㆍ 사출(Injection) ㆍ 압축(Compression) ㆍ 블로우 성형(Blow Molding) ㆍ 진공 성형(Vacuum Molding) ㆍ 발포 성형(Foam Molding) ㆍ 피복(Encapsulation) ㆍ 회전식(Rotational) ㆍ 주조(Casting) ㆍ 적층(Laminating) ㆍ 압출(Extrusion) ㆍ...(중략)

• 한국수학교육학회지시리즈A:수학교육
• /
• 제46권3호
• /
• pp.245-261
• /
• 2007

This paper deals with the possible problems which may arise when students learn the names of elementary geometric figures in the languages of Korean, Chinese, English. The names of some simple geometric figures in these languages are analyzed, and a specially designed test was administered to some grade eight students from the three language groups to explore the possible influence of the characteristics of the languages on students' capability in identifying the figures, the way students define the figures, and students' understanding of the inclusive relationship among figures. It was found that the usage of the terms to describe geometric figures may indeed have affected students' understanding of the figures. The names of geometric figures borrowed from those of everyday life objects may cause students to fix on some attributes of the objects which may not be consistent with the definition of the figures. Even when the names of the geometric figures depict the features of the figures, the words used in the naming of the figures may still affect students' understanding of the inclusive relations. If there is discrepancy between the definition of a geometric figure and the features that the name depicts, it may affect students' understanding of the definition of the figure, and if there is inconsistency in the classification of figures, it may affect students' understanding of the inclusive relationship involving those figures. Some implications of the study are then discussed.

• 한국실내디자인학회논문집
• /
• 제21권1호
• /
• pp.103-110
• /
• 2012

With a theoretical focus on the emotional experiences created via the interface, and the relationship between human beings and space, this study aims to corroborate and clarify the formation and verification of emotional interactions between human beings and space using body movements. It follows the method of Coining "Movement Phrases" through the analysis of body movements in the experimental space, thereby developing them into a complete scenario to produce the story of emotional expression. This study has hereby generated the following outcomes: First, the "pocket-type" exhibition displays a higher frequency of body movements than the "general" exhibition. It has close connections with emotional vocabularies: "Curious," "interesting," "warm," and "fun." The "general" exhibition records a relatively high frequency of emotional vocabularies like "natural," "efficient," and "free." Second, it is possible to analyze the story of space using a scenario, just like drama, based upon attributes and serial relationships. The "exposition" section reveals a high degree of "curiosity" and a large number of body movements, while the "development" section indicates high degree of "surprise" plus slight body movements. The "transition" sections manifest high "interest" and many body movements, and the "climax" section shows a high frequency of "surprise" and many changes in body movements. The "conclusion" section finally invokes images together with body movements.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.114.2-115
• /
• 2003

Rice stripe virus causes severe damage to rice in Korea, Japan and China. RSV is a type member of the tenuivirus group and transmitted by the small brown planthopper, Laodeiphax striatellus, in a persistant manner. Until now, occurrence of RSV is limited in of southern part of Korea. But recently occurrence of RSV is increasing and spreading in central part of Korea including Chungcheong and Kyonggi province. So we analyzed recent occurrence trend of RSV which is increased and cloned and sequenced coat protein gene for isolating of RSV strain. Infected rice of each species(Ilpumbyeo, Sindongjinbyeo, Keumobyeo-2, Dongjinbyeo, Jongnambyeo, Samcheonbyeo, etc.)is collected, we extracted total RNA from infected leaves and detected RSV viral RNA by reverse transcription(RT)-PCR using specific primer of coat protein gene. The result of RT-PCR, we observed specific band. We already cloned cDNA from the band, is analyzing sequence variety and homology of each species.

• 소성∙가공
• /
• 제23권6호
• /
• pp.363-368
• /
• 2014

Electromagnetic forming(EMF) is one of the high-speed forming methods, and has been used to deform metal sheets. The advantages of electromagnetic forming are reduced wrinkling due to non-contact characteristic and fine formability because of the high speed impact. In the current study, we suggest the application of electromagnetic forming to emboss pattern shapes using electromagnetic forces with only one forming coil and one punch. The high impact of the sheet at speeds of 100~300m/s produces significant coining pressure. In the current paper, electromagnetic forming was applied to Al 1100-O sheets; with thickness of 1.27mm and an area of $40mm{\times}40mm$. Using a single spiral coil, totally different types of patterns were created. Four different patterns were successfully produced on the aluminum sheet. The length and depth of the patterns were measured by three-dimensional scanning. Comparisons to the die shape showed good agreement. The test results confirm that emboss pattern forming by EMF using a single die can be used to replace the costly conventional method.

• 한국실내디자인학회논문집
• /
• 제18권1호
• /
• pp.27-34
• /
• 2009

Architect Bernard Tschumi had explored a new architectural conception through his own notional devices such as space, event and movement during 1970s. But, among these notions, the concept of movement was ambiguous and difficult to adopt it for architectural design strategy. Because the movements in everyday's behaviour or in dancing art are significantly different from architectural thought. However he had succeeded in coining the creative notion of movement as almost real body's and of living flesh. He invented an acute methodology and bold interpretation for his early experimental works. So, this paper tried to understand and analyse his concept of movement focused on his early works. The results of this paper's discussion are as follows; First, Tschumi's movement concept Is dynamic one operated by desire and can violate space in physical level as well as metaphysical level. Next, the movement performs the role of generator which deforms space or even generate it. Third, his movement can be readable only when you go down and bring it in practice. Also it Is unblocked potentiality, undetermined sequential material and unfinished practice. Fourth, when Tschumi's movement could be thought as walking, this walking movement makes up a story through rhetorical speech acts that are presented by turns and detours.

• 한국콘텐츠학회논문지
• /
• 제9권12호
• /
• pp.113-120
• /
• 2009

온라인 게임에서의 언어폭력 문제는 매우 심각하지만 그에 대한 효과적인 정책이나 기술적인 방법은 부족한 상황이다. 온라인 게임 서비스 업체에서는 금칙어 리스트를 작성하여 Swear Filter를 이용한 고정된 형식의 문자열 검색 방식을 통해 문제를 해결하려고 하고 있으나 사용자들은 다양한 방법으로 욕설을 조합 또는 변형시켜 기존의 필터링을 회피하고 있다. 특히 한글은 욕설의 변형이 매우 쉬운 특성을 가지고 있다. 본 논문에는 한글에 기초한 변형 욕설을 효율적으로 탐색하여 걸러내는 알고리즘을 제시한다. 이 알고리즘의 주된 특징은 변형 욕설의 표준형 변환과 자소단위의 반 전체 정렬(semi-global alignment), 이다. 실험 결과 저자들이 다양한 인터넷 게임 환경에서 직접 수집한 다종의 욕설 단어들에 대하여 약 90%의 우수한 필터링 성능을 보였다.

• 한국수학사학회지
• /
• 제21권3호
• /
• pp.97-112
• /
• 2008

이 연구에서는 한국어 수사 하나, 둘, ..., 열의 어원에 대한 현재까지의 연구 결과를 수학사적인 관점에서 비판적으로 조망했다. 수학사적인 관점에서 보면, 하나, 둘, 셋의 어원을 찾는 일은 사실상 가능해 보이지 않는다. 셋과 넷, 넷과 다섯 사이에는 단절이 있었을 가능성이 있다. 하나, 둘, 셋, 넷의 어원은 다섯, 여섯, ..., 열의 어원과는 다른 측면에서 찾아야 할 것이다. 여섯과 일곱 사이에 단절이 있었을 가능성이 있다. 일곱, 여덟, 아홉의 조어 메커니즘은 동일할지 모른다. 아홉과 열 사이에 단절이 있었을 가능성이 있다. 현재까지의 연구에서는 이러한 단절에 충분히 주목하지 않고 있으나, 수학사에 따르면 수사의 발달에는 여러 번의 단절이 존재 했다.