• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.12-12
• /
• 2005

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1851-1859
• /
• 2022

Experimental research on flow characteristics of open natural circulation system was performed, to figure out the mechanism of the open natural circulation behaviors. The influence factors, such as the heating power, the inlet subcooled and the level of cooling tank on the flow characteristics of the system were examined. It was shown that within the scope of the experimental conditions, there are five flow types: single-phase stable flow, flash and geyser coexisting unstable flow, flash stable flow, flash unstable flow, and flash and boiling coexisting unstable flow. The geyser flow in flash and geyser coexisting unstable flow is different from classic geysers flow. The flow oscillation period and amplitude of the former are more regular, is a newly discovered flow pattern. By drawing the flow instability boundary diagram and sorting out the flow types, it is found that the two-phase unstable flow is mainly characterized by boiling and flash, which determine the behavior of open natural circulation respectively or jointly. Moreover, compared with full liquid level system, non-full liquid level system is more prone to boiling phenomenon, and the range of heat flux density and undercooling degree corresponding to unstable flow is larger.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 1996

Maxwell displacement current clearly shows the onset of a first order phase transition from gaseous to gaseous-fluid phase, and polar ordering of liquid molecules in the solid phase coexisting with fluid. For further monolayer compression in the fluid/solid phase transition, the condensation of domains was suggested.

• 한국분말재료학회지
• /
• 제8권4호
• /
• pp.258-267
• /
• 2001

In this work, the conventional transient liquid phase(TLP) bonding was modified. An attempt was made of using a liquid phase sintered alloy, which will be a liquid phase coexisting with a solid phase at the bonding temperature, as an interlayer for bonding metals. With an aim of revealing the fundamental features of this modified TLP bonding, the kinetics concerned with the growth of solid particles and the isothermal solidification process in Fe-1.16wt%B and Fe-4.5wt%P interlayers for the bonding pure iron, as well as the morphological change of the solid particle, were investigated.

• 한국세라믹학회지
• /
• 제29권2호
• /
• pp.127-135
• /
• 1992

It has been reported that natural petalite showed a low negative thermal coefficient and wide coefficient and wide coexisting region with liquid phase in Li2O-Al2O3-SiO2 system. Therefore, we investigated variation of microstructure and thermal and mechanical properties when the amount of SiO2 content in petalite compound and MgO addition to it compound were changed. As SiO2 content exceeded 80 wt%, crystal phases of $\beta$-cristobalite and $\beta$-spondumene solid solution were formed. Generally, the densification and bending strength were increased by the addition of MgO, but the positive thermal coefficient was found in the case of MgO 10 wt% addition because of second phase and glassy phase.

• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1649-1655
• /
• 2005

동위상(I) 파일럿 채널에 할당된 셀룰러 셀 CCSSC와 직교위상(Q) 파일럿 채널에 할당된 핫 스팟 셀 HSCSSC가 공존하는 광대역 OFCDM 시스템에 환경하에서 분리된 I/Q채널 CCSC를 이용한 탐색 알고리즘을 제안하였다. 제안된 알고리즘은 이동 기지국에서 무선 인터넷을 사용하고자 할 때 셀룰러 셀 CCSSC의 영향으로 감소하는 최상의 핫 스팟 셀 HSCSSC을 빠르게 추적하는데 적합하다. 시뮬레이션 결과 제안된 셀 추적 알고리즘이 기존의 셀 추적 알고리즘과 비교하여 훨씬 빠른 결과를 수행할 수 있음을 보였다.

• 한국광물학회지
• /
• 제13권4호
• /
• pp.196-204
• /
• 2000

We present characteristics of hydrothermal chlorite and its interstratification with 7-$\AA$ mineral phase that occur in the propylitic alteration zone of the Bobae sericite deposit formed in rhyodacitic tuff. Chlorite is found as disseminated fine-grained aggregate or replacement materials of precursor minerals such as Fe-oxides and amphibole. Based on X-ray diffraction(XRD), all chlorites belong to IIb polytype and the (060) reflections averaging $1.53~1.54\AA$ indicate a trioctahedral structure. Chemical compositions of chlorite show that the Fe/(Fe+Mg) values are mostly in the range of 0.44~0.53, and cation deficiencies in octahedral sites range from 0.06 to 0.37. Under scanning electron microscope(SEM) chlorite occurs as well-crystallized aggregates and is subparallely stacked in interstices or between grain boundaries of associated minerals. transmission electron microscopic(TEM) images reveal that chlorite shows regular layers with $14-\AA$ spacings, locally interstratified with $7-\AA$ or $21-\AA$ periodicities. The $21- \AA$ periodicity corresponds to the sum of the $d_{001}$ values of chlorite and $7-\AA$ phase. The chlorite packet coexisting with 7-$\AA$ layers displays abundant defects such as edge dislocations and layer terminations. Selected-area electron diffraction(SAED) indicates that chlorite and $7-\AA$ phase are randomly interstratified in the mixed-layer areas. We propose a lateral change of layers for the polymorphic transition of $7-\AA$ phase to chlorite.e.

• 한국분말재료학회지
• /
• 제9권3호
• /
• pp.189-198
• /
• 2002

In this work, transient liquid phase (TLP) bonding of Ni-Cr heat resisted cast alloy (HP) was investigated. And also the behaviors of the solid particles distributed in the interlayer during TLP bonding were investigated. The MBF-60 and solid particles (Ni, Fe, and $Al_2O_3$ powders respectively) added MBF-60 which will be a liquid phase coexisting with solid particles at the bonding temperature were used as insert metal. The effective and sound bonding was possible by spark plasma sinter-bonding due to the differences of electric resistance between base metal and liquid insert layer which creates high temperature region. During the isothermal solidification, $Al_2O_3$ particles and solid particles of liquid phase sintered insert metal have shown no growth, while Ni and Fe particles grow rapidly. In this TLP bonding using the MBF-60 and distributed Fe, Ni particles as insert materials, the whole isothermal solidification process was dominated by the growth rate of the solid particles distributed in the interlayer.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.1971-1981
• /
• 2002

Two-dimensional solidification analysis during rheology forming process of semi-solid aluminum alloy has been studied. Two-phase flow model to investigate the velocity field and temperature distribution is proposed. The proposed mathematical model is applied to the die shape of the two types. To calculate the velocities and temperature fields during rheology forming process, the each governing equations correspondent to the liquid and solid region are adapted. Therefore, each numerical model considering the solid and liquid coexisting region within the semi-solid material have been developed to predict the defects of rheology forming parts. The Arbitrary Boundary Maker And Cell(ABMAC) method is employed to solve the two-Phase flow model of the Navier-Stokes equation. Theoretical model basis of the two-phase flow model is the mixture rule of solid and liquid phases. This approach is based on using the liquid and solid viscosity. The Liquid viscosity is pure liquid state value, however solid viscosity is considered as a function of the shear rate, solid fraction and power law curves.

• 대한금속재료학회지
• /
• 제47권2호
• /
• pp.114-120
• /
• 2009

The viscosities of $CaO-SiO_2-Al_2O_3-MgO$ flux were measured under the condition of $CaO/SiO_2=1.0-1.3$ and 5-20 wt%MgO. Submerged arc welding flux with $5wt%Al_2O_3$ content had the lowest critical temperature and widest solid-liquid coexisting region at about 5 wt%MgO. It indicateds that both critical temperature and viscosity depend on the kind of primary phase of molten flux. Viscous behavior of the molten flux at 1773 K was analyzed in the view of silicate structure changed by FT-IR spectroscopy. Based on the critical temperature and the behavior of viscosity at a fixed temperature, it could be proposed that the contents of MgO and $Al_2O_3$ in SAW flux show a pronounced effect on preventing contamination in maintaining the liquid phase flux after welding process.