• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.145-149
• /
• 1997

General joystick using spring only has a vibration when operaor drops the joystick. If it is used as input of motorized wheelchair, its system have a serious problem which operator fall into dangerous situation. Therefore, In this paper proposed non-vibration joustick which control a motorized wheelchair. Non-vibration joystick was designed which return to origin point when operator drops joystick by mistake. Reflected force of non- vibration joystick is defined as addition displacement and variation rate. And each parameter has elasticity of spring and viscosity of DC servo motor. Through simulation for virtual environment, we found two coefficient to return origin point smoothly when a disabled person drops the joystick. In case of larger elastic coefficient of spring than viscous coefficient, we confirmed the result has the equal vibration of general joystick (under-damping). In opposite case, joystick returned to origin point with excessive force. As a application of non-vibration joystick, we experimented wall-following controlling. In this trial, we corroborated that joystick follows smoothly around the corridors.

• Journal of the Korean Home Economics Association
• /
• v.8 no.1
• /
• pp.21-35
• /
• 1970

1. For the purpose of making the basic pattern construction 100 girls attending the Seoul National University College of Home Economics were measured in finding of body size and coefficient of correlation which would be used as one basis of this study. 2. Coefficient of correlation of each body part based on the breast width was shown as follows; Correlation coefficients of bust to waist and hip were high and those of bust to shoulder width, neck height, back width, and breast width were low. None of that was found between bust and back length. It was not recognized so scientific to adjust the basic pattern construction with figures proportioned by those of neck, shoulder width, breast width, and back width. 3. The method of basic pattern construction obtained by this research has been demonstrated in direct wearing since 1967. It is believed that the result will contribute a great benefit in teaching clothing as well as in mass production industry of ready-made garments.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.97-101
• /
• 2008

As the number of concrete building structures in marine environment increases, it is important to study and predict the durability and the compound deterioration of the concrete which is exposed in both chloride and freezing-thawing damage. The concrete's resistance against freezing and thawing is tested based on KS F 2456, while its chloride ion diffusion coefficient is evaluated based on NT BUILD 492. In result, the more exposure to freezing and thawing process, the shorter life it gets, due to the increased amount of chloride ion diffusion coefficient.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1183-1185
• /
• 1999

The basic purpose of economic dispatch problem is that minimize fuel cost with inequality constraint of generator output. To solve this problem it is very important to express power loss equation that have quadratic function of generator output power included B-coefficient. This Paper presents a method in determining B-coefficient by use A-matrix that is calculated by loss re-distribution algorithm (LRDA) considering voltage dependent load model (VDLM)s. The Proposed algorithm is tested with IEEE 6 bus sample system, which shows the result in each cases by the change of load component factor.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.272-277
• /
• 2001

In order to evaluate variation of fatigue data of the LP steam turbine blade steel, it is important to estimate P - S - N curves to accurately define the probability distributions. In this study, new procedure is introduced to determine the expression of P - S - N curves. For this purpose, 3-parameter Weibull distribution was found to be most appropriate among assumed distributions when the probability distributions of the fatigue life were examined by the proposed analysis. Furthermore, parameter estimation for P - S - N curves was performed using various optimization to maximize the correlation coefficient. As a result of this, sequential linear programing method is used for estimation of P - S - N curves.

• Journal of Power System Engineering
• /
• v.11 no.3
• /
• pp.16-21
• /
• 2007

Three dimensional numerical study was carried out to investigate the effect of aspect ratio on microchannel flow. We considered five straight rectangular channels with aspect ratios (height/width) 0.2, 0.4, 0.6, 0.8 and 1.0. Nitrogen gas flow was investigated for both slip and noslip wall boundary conditions. Isothermal wall condition was assumed. We used control volume method for this simulation. The slip velocity increases with the increase of aspect ratio. Friction coefficient decreases with the increase of aspect ratio. Slip friction coefficient is lower than noslip friction coefficient. Mass flow rate of slip model is higher than that of noslip model. We compared our results with the experimental result reported in the literature. The agreement was good.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.13-21
• /
• 2007

This paper presents characteristics of steady flow by variation of a combustion chamber and an intake port. Gas flow field inside a combustion chamber is the important factor in improving combustion stability and reduction of emission level. The flow characteristics such as flow coefficient, tumble ratio and swirl ratio are measured by the steady flow rig test with an impulse meter in this study. In the measuring, the valve lifts are varied between 1mm to 10mm. The three combustion chambers and two intake ports were applied to the steady flow apparatus in order to investigate the effect of swirl and tumble on the in-cylinder flow. As a result, tumble ratio were found to be different by variation of the combustion chambers and the intake ports. The data from the present study can be applied to design of a similar engine as basic data.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.743-748
• /
• 2007

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. Especially, a newly developed vehicle that first runs commercially requires necessarily the measurement and evaluation of derailment coefficient for securing the safety of a vehicle while measuring the derailment coefficient in view of securing running safety could be the more important factor than any other factors. In this paper, examined possibility that can forecast derailment possibility to behavior of only vibration and displacement by measuring vibration acceleration and displacement in vehicles that travel actuality rail track, and compares with data of wheel load/lateral force result.

• Tribology and Lubricants
• /
• v.23 no.2
• /
• pp.61-65
• /
• 2007

It is very important to connect machinery and maintain it. This is usually done by bolt joint. There are two ways in connecting the bolt joint : the angle method and the torque method. The torque method is a method that let the clamping force maintain. The underhead of the bolt's head and the thread friction are the main influences. This study focuses on how the clamping farce and friction coefficient change under the condition in vibrating the underhead of the bolt's head part. As a result, under vibration condition, we found out that the clamping farce increases, while the friction coefficient decreases.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.218-220
• /
• 1997

In power system, economic dispatch problem is to minimize fuel cost with inequality constraints of generator output. To solve this problem it is very important to express power loss equation that have Quadratic function of generator power included B-coefficient. This paper presents a method in determining B-coefficient by use A-matrix that is calculated by power flow considering voltage dependent static load model. The proposed algorithm is tested with IEEE 6 bus sample system, which shows the result in each cases by the change of load component factor.