• Journal of Welding and Joining
• /
• 제4권2호
• /
• pp.47-52
• /
• 1986

Friction Welds are formed by the mechanisms of diffusion as well as mechanical inter-locking. The severe plastic flow at the interface by the forge action of the process brings the subsurface so close together that detection of any unbounded area becomes very difficult. No reliable method is available so fat to determine the weld quality nondestructively. The paper presents an attempt to determine weld strength quantitatively using the ultrasonic pulseecho method. The new approach calculates the coefficient of reflection based on measured amplitudes of the echoes. This coefficient provides a single quantitative measurement which involves both acoustic energy reflected at the welded interface as well as transmitted across the interface. As a result, it was known that the quantitative relationship between the coefficient and the weld strength (torsional strength) could be drawn.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.148-151
• /
• 2004

The hardening of concrete after setting is accompanied with nonlinear temperature distribution caused by development of hydration heat of cement. Especially at early ages, this nonlinear distribution has a large influence on the tensile cracking. As a result, in order to predict the exact temperature distribution in concrete structures it is required to examine thermal properties of concrete. In this study, the coefficient of air convection for concrete mix of nuclear power plant, which presents thermal transfer between surface of concrete and air, was experimentally investigated with variables such as velocity of wind and types of form. The coefficient of air convection obtained from experiment increases with velocity of wind, and its dependance on wind velocity is varied with types of form. This tendency is due to a combined heat transfer system of conduction through form and convection to air. The coefficient of air convection for concrete mix of nuclear power plant obtained from this study was well agreed with the existing models.

• 한국농촌건축학회논문집
• /
• 제13권4호
• /
• pp.59-66
• /
• 2011

This study aims to understand the degree of inequality of surveyed rural amenity resources according to resources and region in basic self governing body by estimating the Gini Coefficient and Lorenz Curve. Case Study was performed in Sunchang basic self governing body which full survey of rural amenity resources was completed. The Gini Coefficient was applied to measure the concentration of amenity resources in 11 Eup-Myun regions, Sunchang county of Jeonbuk province. The results demonstrate significantly different variation according to Eup-Myun regions and amenity variables. This result would be used as a basic data for rational rural planning based on amenity resources through identifying distributional concentration of rural amenity resources in basic self governing body.

• 한국IT서비스학회지
• /
• 제17권2호
• /
• pp.49-67
• /
• 2018

This study compares economic impact between Software and Medical industry through Input Output Table by Bank of Korea. We classify Software and Medical industry by The ninth Korea Standard Industry Classification and use linkage effects, value added inducement coefficient, and labor inducement coefficient to analyze economic impact. First, software and medical industry have different linkage effects between backward and forward. Second, They have higher value added inducement coefficient than average of all industry. Third, They not only have higher labor inducement coefficient than average of all industry but also simillar effect on labor induction. According to the result of this study, software and medical industry have high economic impact on Korea economy, and therefore are intensively fostered by policy support.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.89-92
• /
• 2001

This study aims at investigating the relationship between dispersion coefficient ratio to molecular diffusion coefficient (D$_{l}$ /D$_{m}$) and Peclet number (Pe) for multi-solute system in non-Darcian flow regime. Existing understanding on solute dispersion is primarily derived from one-solute system in Darcian flow regime. We found that solute dispersion in rock fractures can be characterized by the mechanism of both macrodispersion and Taylor dispersion, even for non-Darcian f]ow domain. For the Darcian flow regime even different solutes lead to the same D$_{l}$ /D$_{m}$ at same Pe. However, as the flow becomes non-Darcian, solute with a higher molecular diffusion coefficient result in higher D$_{l}$ /D$_{m}$ at tile same Pe than that with a lower diffusion coefficient.cient.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1051-1060
• /
• 2010

In this study, the pressuremeter test (PMT) and the standard penetration test (SPT) were performed on the lateral pile loading tests site to evaluate the coefficient of subgrade reaction, which is used for load-deformation behavior analysis of laterally loaded piles by elastic subgrade reaction method. As a result, widely used empirical formulas of the coefficient of subgrade reaction by N values of SPT is evaluated conservatively lateral behavior of piles. While the method of directly used PMT results and evaluation method of the coefficient of subgrade reaction considering deformation moduli of soil and a pile diameter that is able to estimate very similar to actual load-deformation behavior of laterally loaded piles in deformation range of 0.5%-1.0% of a pile diameter.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.489-492
• /
• 2006

A chloride is an important deteriorating factor which governs the durability of the reinforced-concrete structures under marine environments. Also, the main penetration mechanism of chloride ion into concrete is a diffusion phenomenon and numerous methods have been proposed to determine the diffusion coefficient of chloride ion quickly. In this study, electrically accelerated experiments were carried out in order to evaluate diffusion coefficient of the chloride ion into concrete. The methods were diffusion cell test method in which the voltage of 15V(DC) was applied. The type of cement is blended cement in which the admixtures of blast-furnace slag and fly ash were used. In conclusion, the diffusion coefficient of chloride ion is much affected according to mineral admixtures and the diffusion coefficient of ternary blended cement showed very low values. it is presumably said that this result is due to highly densified pore structures by the aid of slag substitution and pozzolanic activity of fly ash.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.672-677
• /
• 2004

This paper is on determination method of preconsolidation pressure and consolidation coefficient using Kores University Calibration Chamber System(KUCCS). High-quality, large-size cohesive soil specimen was prepared by using two-stage slurry consolidation technique, which has many advantage for research and calibration purpose. The result from consolidation stage in KUCCS was compared with results of oedometer test. The results by Casagrcnde method gave very good agreement with preconsolidation pressure in slurry consolidometer. And, the predicted consolidation coefficient by log t method showed agreement with the experimental results in KUCCS.

• 한국세라믹학회지
• /
• 제30권2호
• /
• pp.93-100
• /
• 1993

The effects of MgO addition on thermal expansiion coefficient and dielectric constant of mullite were studied. Thermal coefficient and dielectric constant decrease with increasing MgO content and exhibit a minimum value at 1wt% MgO. However, above 3wt% MgO content both values increase. Result of X-ray diffraction analysis how that mullite compositions which include more than 0.1wt% MgO form cordierite. Spinel is also formed as well as cordierite in the composition containing more than 3wt% MgO. The results indicate that addition of MgO affect the thermal expansion coefficient and dielectric constant of mullite substrate because of the formation of new phases; cordierite and spinel. The thermal expansion coefficient and dielectric constant are affected mainly by cordierite and spinel in the regions containing less than more than 3wt% MgO, respectively.

• 한국환경과학회지
• /
• 제20권4호
• /
• pp.519-525
• /
• 2011

A three-dimensional ecological model(EMT-3D) was applied to DAS1 in Tokyo Bay. The simulated results of DAS1 were in good agreement with the observed values. The result of sensitivity analysis showed that photolysis coefficient and extinction coefficient were important factor for dissolved DAS1, and photolysis coefficient, extinction and POC partition coefficient for PAHs in particulate organic matter. Mass balance of DAS1 in Tokyo Bay was calculated by using the simulated results of EMT-3D.