• Journal of Service Research and Studies
• /
• v.4 no.1
• /
• pp.71-81
• /
• 2014

It is important for regional comparative analysis about economically active population ratio by sex and total economically active population ratio to a policy data of central and local government. Through the result of comparative analysis, Central and local government can use policies distinctively according to the region and keep the efficiency of detail policy application. This paper shows regional comparative analysis about economically active population ratio by sex for the Seoul metropolitan region, Gangwon region, Chungcheong region, Youngnam region, Honam region using the economically active population survey data in 16 cities and provinces. We used the survey of economically active population for 13 years from 2000 to 2012, we calculated total economically active population ratio and economically active population ratio by sex about the 5 regions. And we analyzed the relative ratio between economically active population ratio of male and female by each region, we also analyzed the results of regional comparative analysis by sex.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.4
• /
• pp.111-119
• /
• 2008

The runoff coefficient for a block paved area is determined with regional rainfall distribution. The Rational Method is a basic equation of a drainage system design and is a function of runoff coefficient, rainfall intensity and area. A runoff coefficient is the ratio of rainfall intensity and runoff. The rainfall intensity which is a function of the return period and rainfall duration differs by region. Therefore the runoff coefficient varies regionally even though there is the same return period and rainfall duration. The ratio of rainfall intensity and rainfall duration is decided by the loss of rainfall. The constant infiltration capacity of Horton's equation is adopted to determine the loss of rainfall. As time passed, the joint of the block paved area through which the infiltration occurs is covered by pollution material, sandy dust, pollen and is hardened by foot pressure, so the constant infiltration capacity may decrease. Six different sites were selected to verify the assumption of the constant infiltration capacity decrease and 10 year return period. 10, 20, and 30 minute rainfall duration were applied to calculate rainfall intensity. The results indicate that the Horton's constant infiltration capacity decreases over time and the minimum constant infiltration capacity is selected to compute runoff coefficients. The runoff coefficients varied by region ranging from $0.94{\sim}0.84$ for 10 minute of rainfall duration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.107-116
• /
• 2014

A volume density of roughness correction blocks in a channel is defined and the corresponding roughness coefficient(n) is estimated by analyzing the diverse hydraulic characteristics of VR, the product of the average velocity and the hydraulic radius, block Reynolds number ($Re^*$), drag coefficient ($\acute{C}_D$), and the roughness coefficient ($n_b$) of bottom shear. The increase of VR and block Reynolds number causes the exponential decrease of roughness coefficient converged to a constant value as expected. The drag coefficient also exponentially decreases as block Reynolds number increases as well. The drag force is governed by the block shape defined by volume density in high block Reynolds number of turbulent flow region. For more accurate estimation of roughness coefficient the use of the correlation equation of it is required by block Reynolds number and volume density. The regression equations for n-VR, $\acute{C}_D-Re^*$, and $n_b-\acute{C}_D$ are presented. The regression equations of roughness coefficient are also presented by block Reynolds number and volume density. The developed equation of roughness coefficient by block Reynolds number and volume density has practical use by confirming the coincidence between the experimental results and the results of HEC-RAS using the developed equation.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.371-379
• /
• 2004

Soil investigation data at 7 different locations around Honam costal region were analyzed and experimental correlations between soil properties and parameters of soft clay were presented. Most soils were classified as CL and CH by the Unified Soil Classification System and were unstable structurally because the water contents were generally greater than the liquid limits. The compression index has good correlations with water content, liquid limit and initial void ratio. The trend of these correlations were similar to the Skempton equation Cc = 0.009(LL -10) and other studies for Korean soft clays but the constants were small different. The slope of these correlations for Honam costal region were slightly greater than those for Kyunggi costal region and Kyungnam costal region. The correlation coefficient (R) between the liquid limit and the plastic index is 0.93. It is seen that not only the water content and the liquid limit but also the water content and the initial void ratio are correlate, therefore the experimental equations were presented for the practical purpose.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.189-195
• /
• 1999

Determining factors and temporal & spatial characteristics of COD(Chemical Oxygen Demand) at the sea surface in Jinhae bay have been examined by using seasonal data, taken at twenty six stations over the whole bay during 1989~1994 by NERDA. The data have been analyzed in terms of long term means, anomalously large values. Jinhae bay is divided into three regions based on the time mean : mouth of Jinhae bay, inner sea of Masan bay, western sea of Jinhae bay called region 1,2 and 3, respectively. The horizontal distribution of the long term mean of COD at each station is similar to those of nitrogen and phosphorus. Characteristics of whole mean variation in the year shows high range of variation in region 2. It was appear to decreases every year in whole trend. Factors determining seasonal variation in whole COD mean are relative to salinity and nutrient, affected by precipitation in summer. Spatial variation shows high range of fluctuation in region 2 compare to other region. Factors determining of spatial variation of COD was appear to nutrient, affected by pollutant load of land area and bottom sediment. The long term mean of COD at each station is closely related with thats of nutrients. The correlation coefficient between COD and nitrogen, phosphate phosphorus was found to be high as 0.75, 0.78, respectively. Anomalously large COD was observed 14 times at 6 stations. These stations are located in inner sea of Masan bay(Region 2) and Songjeong bay(Region 1). The seasonal frequency of the observed anomalous COD is large in April, and other seasons are much the same.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1398-1401
• /
• 2005

The nano/microstructure, the aging response (in T5 heat treatment), and the mechanical/tribological properties of the eutectic regions in squeeze-cast A356 alloy were investigated using nano/micro-indentation and mechanical scratching, combined wit optical microscopy and atomic force microscope(AFM). Most eutectic Si crystals in the A356 alloy showed a modified morphology as fine-fibers. The loading curve for the eutectic region was more irregular than that of the primary Al region due to the presence of various particles of varying strength. In addition, the eutectic region showed lower pile-up and higher elastic recovery than the primary Al region. The aging responses of the eutectic regions in the squeeze-cast A356 alloys aged at $150^{\circ}C$ for different times(0, 2, 4, 8, 10, 16, 24, 36 and 72 h) were investigated. As the aging time increased, acicular Si particles in the eutectic regions gradually came to a fine structure. Both Vickers hardness ($H_V$) and indentation ($H_{IT}$) test results showed almost the same trend of aging curves, and the peak was obtained at the same aging time of 10 h. A remarkable size-dependence of the tests was found. The friction coefficient for the eutectic region was lower than that for the primary Al region.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.511-521
• /
• 2018

Proportional capacitor current feedback active damping (CCFAD) has a limited valid damping region in the discrete time domain as (0, $f_s/6$. However, the resonance frequency ($f_r$) of an LCL-type filter is usually designed to be less than half the sampling frequency ($f_s$) with the symmetry regular sampling method. Therefore, ($f_s/6$, $f_s/2$) becomes an invalid damping region. This paper proposes an improved CCFAD method to extend the valid damping region from (0, $f_s/6$ to (0, $f_s/2$), which covers all of the possible resonance frequencies in the design procedure. The full-valid damping region is obtained and the stability margin of the system is analyzed in the discrete time domain with the Nyquist criterion. Results show that the system can operate stably with the proposed CCFAD method when the resonance frequency is in the region (0, $f_s/2$). The performances at the steady and dynamic state are enhanced by the selected feedback coefficient H and controller gain $K_p$. Finally, the feasibility and effectiveness of the proposed CCFAD method are verified by simulation and experimental results.

• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.93-105
• /
• 2015

The purpose of this study is to outline the strategic implications of a structure analysis and trends of transferred air cargoes for the main airports of the North Asian region for 13 years from 2000 to 2012. To do so, it analyses the concentration levels using a Gini coefficient and Hirschmann Herfindahl index and represents the competitive positioning with regard to the main East Asian airports using the BCG framework and shift-share analysis. Currently, the concentration level is getting weaker in response to the emergence of Chinese airports in the north-east region. It is likely that the steady growth of air cargo of Shanghai airport (PVG) has caused the increase in concentration levels in the region. Seoul airport (ICN) may be directly in competition with PVG for air cargo in the region, giving consideration to reducing or maintaining an average increase ratio of air cargoes of ICN, NRT (Tokyo), and KIX (Osaka) for same period. In the same sense, the average increase in ratio for ICN for same period yields 1.3%, which is far behind the 6.2% and 5.2% of the north-east region and PVG respectively. Additionally, shift-share effect analysis indicates that ICN lost 422,180 tons in the north-east region during the same period, suggesting that transferred cargoes might have been forwarded to PVG.

• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.209-217
• /
• 2016

The rational method is formed area, rainfall intensity and runoff coefficient that is representation of land use or surface type. A runoff coefficient is a range for a each surface conditions. Drainage Sewer Design Guideline revised at 2011 proposes return periods 10~30 year instead of 5~10 year for increasing design flood. Ponce and ASCE refer higher values of runoff coefficient require for higher values of rainfall intensity and return period, therefore runoff coefficient had to be corrected but not. In case of park, land use and surface type are different from Korea and U.S, so impervious area ratio is different. The runoff coefficient for park is estimated considering with impervious area ratio and return period. 1,004's parks in 20 cities are randomly selected for impervious area ratio and runoff coefficient is estimated. And a proportion of 30 year return period runoff coefficient to 10 year return period with rainfall duration is calculated for 69 weather stations. The estimated runoff coefficient is 0.43~0.54 for return period 10~30 year and the difference of region and rainfall duration is not significant.

• Journal of Korea Foundry Society
• /
• v.17 no.6
• /
• pp.598-607
• /
• 1997

Fractional melting process involves heating an alloy within its liquid-solid region simultaneously ejecting liquid from the solid-liquid mixture. The extent of the purification obtained is comparable to that obtained in multi-pass zone refining. The new fractional melting process in which centrifugal force was used for separating the liquid from the mixture has been developed and applied to the purification of the metallic grade. Refining ratio depends on partition ratio, cake wetness and diffusion in the solid, and it was controlled by various processing parameters such as rotating speed and heating rate. The new parameter called "refining partition coefficient" has been suggested to estimate the effects of processing variables on the refining ratio. Because major impurities in MG-silicon such as Fe, Al, Ni have a low segregation coefficient, good purification effect is expected. The results of refining MG-silicon(98%) showed that 3N-Si was obtained in refined solid of 50% of the original sample.