• Tribology and Lubricants
• /
• v.34 no.2
• /
• pp.55-59
• /
• 2018

This paper proposes a new type of electro-mechanical wedge brake for commercial vehicles. The brake operates on a novel mechanism for self-boosting braking friction forces using eccentric shafts, and involves wedges that are inserted between the rampbridge and traverse; this self-boosting mechanism is explained herein. A dynamic analysis using ADAMS was conducted, and the findings are reported. The constraint and contact conditions are explained to verify the precision of the dynamic analysis. The dynamic analysis shows that in the proposed mechanism, the self-boosting effect occurs as desired. However, it is also noted that the system has a limitation in terms of the production of unlimited braking forces that can jam the roller inside the wedges. After demonstrating the self-boosting effect, dynamic analyses are performed for several values of the wedge angles and friction coefficients between the brake pads and disks. Conventionally, a lower wedge angle has been suggested owing to its provision of a larger clamping force for given friction coefficients. However, it is noted that lower wedge angles can lead to a higher probability of occurrence of undesirable high braking forces, which can jam the roller into the wedge; thus, a larger wedge angle is preferable for avoiding the undesirable jamming phenomena. These analysis results are presented and discussed herein.

• Korean journal of applied entomology
• /
• v.36 no.1
• /
• pp.105-110
• /
• 1997

Mixture study of bifenthrin and prothiofos was conducted to control insecticide resistant diamondback moth (DBM), Plutella xylostella, which had shown 581, 18, 19, 11 fold resistance to fenvalerate, cypermethrin, furathiocarb, and prothiofos in Chinju strain, respectively and 38 and 9 fold resistance to fenvalerate and furathiocarb in Seosang strain, respectively. Optimal mixture ratios of bifenthrin and prothiofos was selected against Seosang strain of DBM by leaf dipping method in laboratory and by field test. Maximum co-toxicity coefficient by dipping method was shown at a ratio of 1:50 mixture of bifenthrin 1EC and prothiofos 50EC in active ingredient(a.i.) by 243.2 and then suddenly decreased. The mixed formulation from the dipping test was examined at the cabbage field of Seosang, Hamyang. Although insecticides were reduced to half, control efficacy was similar to farmer's conventional method. In addition, the mixture combination was also more effective against Chinju DBM population which had very high level of resistance to several representative insecticides. Mixture methods of insecticides will be effective countermeasures to the resistance problem of pests.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.1
• /
• pp.16-25
• /
• 2015

Visual census and hydro-acoustic survey was carried out at Ulju small scale marine ranching area (MRA) to estimate demersal fish aggregations on September and November 2013. In this hydro-acoustic survey, the authors combined an image sonar with a scientific echo sounder to monitor an underwater situation and compare two acoustic data. Consequently, visual census survey was useful to estimate fish species composition for hydro-acoustic survey, because it is easy to identify aggregated fish species and overcome limits on a fishing depth and ability of an conventional fishing gear like a bottom gill-net or a fish trap at marine ranching area. Mean fish density was estimated as $0.757g/m^2$ on September and $0.219g/m^2$ on November and Fish abundance was finally calculated as 1.51ton (coefficient of variation, CV=13.1%) on September and 0.44ton (CV=47.7%) on November, respectively. Hydro-acoustic survey combined with the image sonar was useful to monitor fish aggregations and estimate fish stocks around artificial reefs at shallow coastal MRA. We were able to easily identify the underwater structures like an artificial reef and a fishing rope as well as fish aggregations from image sonar data. Therefore, the method was effective to separate unwanted echo signals in acoustic data of scientific echo sounder.

• Horticultural Science & Technology
• /
• v.16 no.4
• /
• pp.503-507
• /
• 1998

This study was initiated to evaluate genetic relationship among various domestic and exotic pepper accessions using random amplified polymorphic DNA(RAPD) markers. The results suggested that the optimum conditions for PCR with random primers in Capsicum spp. could be obtained with 3mM of $MgCl_2$, 1.5U of Taq. DNA polymerase, 10ng of template DNA, $200{\mu}M$ of dNTPs, 200nM of random primer, and $42^{\circ}C$ of annealing temperature. Sixteen random primers showing high band intensity and reproducibility were selected from 80 random primers. Primers having 70% GC content were more effective in DNA amplification than primers having 60% GC content. The total 93 DNA bands including 71 polymorphic bands and 22 monomorphic bands were obtained with selected 16 random primers for 31 pepper cultivars and lines. About 4.4 polymorphic bands per primer were produced. Similarity coefficients were calculated by using 71 polymorphic bands and dendrogram based on the similarity coefficient showed clear classification of 31 peppers into three Capsicum species of Capsicum annuum, Capsicum chinense and Capsicum chacoense.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.949-956
• /
• 2005

In this paper, a new CPW-fed cross shape fractal antenna having a self-affinity is presented. This novel configuration, which has anisotropic scaling symmetry, makes smaller profile characteristic compared to the fractal antenna using a self-similarity. Increase of the iteration coefficient, which leads to decrease of the fundamental resonant frequency, shows a good impedance matching condition and multi-band characteristics due to new surface current paths. The radiation patterns are similar to those of monopole antennas. In the K3 stage of iteration, the proposed antenna shows a measured maximum gain 2.27 dBi at 940 MHz. A commercially available software based on the FDTD algorithm has been used to obtain the predicted results. In addition, an RT/Duroid 5880 substrate has been employed for the experimental results.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.117-124
• /
• 2010

The aggregate, which does not satisfy the standard of KS F 2573, was selected for this investigation. The 28day compressive strength of recycled aggregate concrete without pozzolan material was 21.7MPa, which was less than the strength of concrete made with crushed stone. However, the compressive strength at 28 days was improved by mixing early rapid hardening cement to the cement at the weight ratio of 2.5%. Furthermore, the compressive strength at 91 days and 180 days increased significantly by adding fly ash, slag powder, and diatom powder. The tensile strength of recycled aggregate concrete with pozzolan material also increased about 40% compared to the general concrete. Futhermore, the shrinkage and creep of recycled aggregate concrete with fly ash and slag powder was a little decreased that of recycled aggregate concrete with fly ash and diatom powder. Relationship between compressive strength and creep coefficient was shown to the linear relation like as ${\sigma}_c=-30CF+404$.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2253-2261
• /
• 2022

In this study, nano-scaled shielding materials were assembled and fabricated by doping different weight percentages of Nano-mercuric oxide (N-HgO) into Nano-Bentonite (N-Bent) based on using (100-x% N-Bent + x% N-HgO, x = 10, 20, 30, and 40 wt %). The fabricated N-HgO/N-Bent nanocomposites were characterized by FT-IR, XRD, and SEM and evaluated to evaluate their shielding properties toward gamma radiation by using four different γ-ray energies form three point sources; 356 keV from ¹³³Ba, 662 keV from ¹³⁷Cs as well as 1173, and 1332 keV from ⁶⁰Co. The γ-rays mass attenuation coefficients were plotted as a function of the doped N-HgO concentrations into N-HgO/N-Bent nanocomposites. The computed values of mass attenuation coefficients (µ_m), effective atomic number (Z_eff) and electron density (N_el) by the as-prepared samples were found to increase, while the half value layer (HVL) and mean free path (MFP) were identified to decrease upon increasing the N-HgO contents. It was concluded also that the increase in N-HgO concentration led to a direct increase in the mass attenuation coefficient from 0.10 to 0.17 cm²/g at 356 keV and from 0.08 to 0.09 cm²/g at 662 keV. However, a slight increase was observed in the identified mass attenuation coefficients at (1172 and 1332 keV).

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.48-58
• /
• 2022

This study tried to assess the applicability of a hand-held LiDAR for measuring the geometric structures of forest trees including diameters at a breast height(DBH) and tree height(H). A traditional method using tapelines was conducted to analyze the accuracy of the LiDAR instrument in the Taebaeksan national park in South Korea. Four statistical indices which are bias, root mean square error, mean absolute error, and correlation coefficient were employed to compare the measurements by the LiDAR instrument and traditional method. The DBHs from the LiDAR were very similar to those from the traditional method. And it indicated that the LiDAR is sufficient to be a alternative of a traditional method. However, there was a limitation in assessing the accuracy of LiDAR for measuring tree height by comparing the measurements by observer's eyes since they included different error sources. Further study is needed to assess the accuracy of LiDAR instrument for tree height through more reliable measurements.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.34-34
• /
• 1987

Friction welding has emerged as a reliable process for high-production commercial application with significant economic and technical advantages. But nondestructive test in friction weld was not clearly developed. Therefore the experimental verification is necessary in order to understand the characteristics of the pulse echo effects according to various change in welding conditions. This paper presents a new attempt to detect the bond strength of friction welds by ultrasonic. Instead of looking for a flaw or cracks at the interface, the new approach evaluates the coefficient by reflection which provides a single quantitative indicator involving the acoustic energy reflected at the interface. The objective of this study is to find the relationship between the reflection coefficients and the weld strength. Results of the bar-to-bar friction welding of aluminum to copper and stainless steel and such relationship investigation are presented and interpreted.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.2
• /
• pp.80-85
• /
• 1987

Friction welding has emerged as a reliable process for high-production commercial application with significant economic and technical advantages. But nondestructive test in friction weld was not clearly developed. Therefore the experimental verification is necessary in order to understand the characteristics of the pulse echo effects according to various change in welding conditions. This paper presents a new attempt to detect the bond strength of friction welds by ultrasonic. Instead of looking for a flaw or cracks at the interface, the new approach evaluates the coefficient by reflection which provides a single quantitative indicator involving the acoustic energy reflected at the interface. The objective of this study is to find the relationship between the reflection coefficients and the weld strength. Results of the bar-to-bar friction welding of aluminum to copper and stainless steel and such relationship investigation are presented and interpreted.