• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.55-60
• /
• 2003

As operating time of heat exchangers progresses, fouling generated by water-borne deposits increases and thermal performance decreases. The fouling is known to interfere with normal flow characteristics and reduce thermal efficiencies of heat exchangers. The heat exchangers of nuclear power plants have been analyzed in terms of the heat flux and heat transfer coefficient at test conditions based on the ASME OM-S/G-Part 2 as a means of heat exchanger management. It is hard to estimate the heat performance trend and to establish the future management plan. This paper describes the fouling evaluation method which can evaluate the thermal performance for heat exchangers and estimate the future fouling variations and the plugging margin evaluation method which can reflect the current fouling level developed in this study. To develop the fouling and plugging margin evaluation methods for heat exchangers, fouling factor was introduced based on the ASME O&M codes and TEMA standards. For the purpose of verifying the two evaluation methods, the fouling and plugging margin evaluations were performed for a component cooling heat exchanger in a nuclear power plant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2388-2404
• /
• 2012

Cryptographic hash functions are widely used in many information security applications like digital signatures, message authentication codes (MACs), and other forms of authentication. In response to recent advances in cryptanalysis of commonly used hash algorithms, National Institute of Standards and Technology (NIST) announced a publicly open competition for selection of new standard Secure Hash Algorithm called SHA-3. One important aspect of this competition is evaluation of hardware performances of the candidates. In this work we present efficient hardware implementations of SHA-3 finalists: JH, Keccak and Skein. We propose high speed architectures using Look-Up Table (LUT) resources on FPGAs, to minimize chip area and to reduce critical path lengths. This approach allows us to design data paths of SHA-3 finalists with minimum resources and higher clock frequencies. We implemented and investigated the performance of these candidates on modern and latest FPGA devices from Xilinx. This work serves as performance investigation of leading SHA-3 finalists on most up-to-date FPGAs.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.303-315
• /
• 1998

Full-scale measurements have been made to determine the increase in wind speed over two exposed embankments, one of $23^{\circ}$ slope and 4.7 m in height, the other of $24^{\circ}$ slope and 7.3 m in height. Measurements were made at heights of 5, 10 and 15 m above the upper edge of each embankment and at the same heights approximately 100 m upwind in the lower-level approach fetch. Despite the modest sizes of the embankments, the maximum recorded increase in mean wind speed was 28% and the minimum was 13%; these increase relate to increases in wind loads on structures erected at the top of the embankments of 64% and 28% respectively. The associated increases in gust speeds are estimated at 33% and 18%, which imply increases in gust loading of 77% and 39% respectively. These experimental results are compared with predictions obtained from a computational fluid dynamics (CFD) analysis, using three high Reynolds number eddy-viscosity models and estimates from the UK wind loading code, BS 6399: Part 2. The CFD results are generally in agreement with the experimental data, although near-ground effects on the embankment crest are poorly reproduced.

• Journal of Contemporary Eastern Asia
• /
• v.20 no.1
• /
• pp.151-168
• /
• 2021

Misguided use, manipulation, misappropriation, disruption and mismanagement of Information deeply affects the infosphere as well as the social and moral fabric of a society. Information ethics is an attempt to bring the creation, organization, dissemination, and use of information within the ambit of ethical standards and moral codes. The diverse and inherently pluralistic nature of societies however puts forth an additional demand on us - to come up with an intercultural information ethics. An intercultural ethics which is other-centric, context sensitive and workable without being homogenizing, patronizing and colonizing. An endeavor in that direction has already been made by proponents of intercultural information ethics like: Charles M. Ess, Fay Sudweeks, Rafael Capurro, Pak-Hang Wong, Soraj Hongladarom et al. In our paper, we propose that the kind of ethical pluralism being sought in the domain of information ethics can be attained by having a reappraisal of the current methodological strategies, by casting a critical relook at the Eurocentric ethical model. This paper analyses the current framework of Intercultural Information Ethics. And in an endeavour to move towards an all-encompassing, other-centric, workable, intercultural, harmonious and compassionate model of 'Pluralistic Information Ethics', it proposes the Indian / Asian philosophical method of 'Samvāda' to the current inventory which includes methods like: 'parrhesia/free speech' and 'interpretive phronēsis.

• Advances in concrete construction
• /
• v.2 no.4
• /
• pp.281-300
• /
• 2014

This study presents the experimental results of twenty three reinforced concrete beams with rectangular web openings externally strengthened with Fiber Reinforced Polymers (FRP) composites bonded around openings. All tested beams had the same geometry and reinforcement details. At openings locations, the stirrups intercepted the openings were cut during fabrication of reinforcement cage to simulate the condition of inclusion of an opening in an existing beam. Several design parameters are considered including the opening dimensions and location in the shear zone, the wrapping configurations, and the amount and the type of the FRP composites in the vicinity of the openings. The wrapping configurations of FRP included: sheets, strips, U-shape strips, and U-shape strips with bundles of FRP strands placed at the top and sides of the beam forming a fan under the strips to achieve closed wrapping. The effect of these parameters on the failure modes, the ultimate load, and the beam stiffness were investigated. The shear contribution of FRP on the shear capacity of tested beams with web openings was estimated according to ACI Committee 440-08, Canadian Standards S6-06, and Khalifa et al. model and examined against the test results. A modification factor to account for the dimensions of opening chords was applied to the predicted gain in the shear capacity according to ACI 440-08 and CSA S6-06 for bonded Glass Fiber Reinforced Polymers (GFRP) around openings. The analytical results after incorporating the modification factor into the codes guidelines showed good agreement with the test results.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.40-48
• /
• 2001

An ultrasonic test method, as a nondestructive test is applied to ensure the clad interface quality assessment. According to the reference codes and standards, not only korea Industrial Standard(KS) but also American Society for Testing and Materials (ASTM) Standard, ultrasonic examination procedures use the pulse-echo, A-scan, back reflection signal drop method and/or side drilled reference hole used to establish the acceptance criteria of clad material test. But the variety of bonding materials and sizes makes it difficult to produce the reference blocks, or thus the criteria. In order to overcome these practical difficulties, new ultrasonic testing criterion is suggested. In this new method, the theoretical interface reflection signal amplitude level is calculated and suggested as an acceptance criteria with the back reflection signal set to 100% FSH(Full Screen Height) which is based on acoustic impedance mismatch at the clad interface for the explosive clad ultrasonic inspection. Applicability of suggested criterion, for the explosive clad Fe-Naval Brass with different bonding quality is confirmed to the pre-existed KS and ASTM specifications and verified by using SEM (Seanning Electron Microscope) micrograph. The results obtained by the suggested method is more conservative than the results according to the KS B 0234 and ASTM A 578 specifications The suggested method could be applicable to any other combination of explosive clad ultrasonic inspection.

• Nuclear Engineering and Technology
• /
• v.51 no.7
• /
• pp.1758-1764
• /
• 2019

As the safety level of nuclear power plants (NPPs) relates to the safety of individuals, society, and the environment, it is important to establish NPP safety goals. In Korea, two quantitative health objectives and one large release frequency (LRF) criterion were formally set as quantitative safety goals for NPPs by the Nuclear Safety and Security Commission in 2016. The risks of prompt and cancer fatalities from NPPs should be less than 0.1% of the overall risk, and the frequency of nuclear accidents releasing more than 100 TBq of Cs-137 should not exceed 1E-06 per reactor year. This paper reviews the hierarchical structure of safety goals in Korea, its relationship with those of other countries, and the relationships among safety goals and subsidiary criteria like core damage frequency and large early release frequency. By analyzing the effect of the release of 100 TBq of Cs-137 via consequence analysis codes in eight different accident scenarios, it was shown that meeting the LRF criterion results in negligible prompt fatalities in the surrounding area. Hence, the LRF criterion dominates the safety goals for Korean NPPs. Safety goals must be consistent with national policy, international standards, and the goals of other counties.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.86-93
• /
• 2010

RFID has been used as an identification tool that substitutes for bar codes. Its areas of application are increasing due to its suitability in ubiquitous environment. In this paper, first, we review various aspects of RFID, including standards, characteristics, and relationships with wireless sensor networks. Then, we review the technical aspects of RFID and its areas of application, e.g., supply chain management (SCM) and manufacturing since 2005. SCM, in which RFIDs can shorten lead time and ensure the quality of products, is one of the most active application areas. Manufacturing is a relatively new area for RFID applications, but it is believed that it can enhance the productivity and the reliability of the products. Also, the authors suggest research issues and limitations of RFID, as well as possible application areas related to marine engineering.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.25-36
• /
• 2023

Nuclear power plants have recognized the importance of nuclear cybersecurity. Based on regulatory guidelines and security-related standards issued by regulatory agencies around the world including IAEA, NRC, and KINAC, nuclear operating organizations and related systems manufacturing organizations, design companies, and regulatory agencies are considering methods to prepare for nuclear cybersecurity. Cryptographic algorithms have to be developed and applied in order to meet nuclear cybersecurity requirements. This paper presents methodologies for validating cryptographic algorithms that should be continuously applied at the critical control system of I&C in NPPs. Through the proposed schemes, validation programs are developed in the PLC, which is a critical system of a NPP's I&C, and the validation program is verified through simulation results. Since the development of a cryptographic algorithm validation program for critical digital systems of NPPs has not been carried out, the methodologies proposed in this paper could provide guidelines for Cryptographic Module Validation Modeling for Control Systems in NPPs. In particular, among several CMVP, specific testing techniques for ECB mode-based block ciphers are introduced with program codes and validation models.

• Journal of the Korean Society of Systems Engineering
• /
• v.13 no.2
• /
• pp.9-17
• /
• 2017

Concept development of a real-time Field Programmable Gate Array (FPGA)-based switched Ethernet data communication network for the Man-Machine Interface System (MMIS) is presented in this paper. The proposed design discussed in this research is based on the systems engineering (SE) approach. The design methodology is effectively developed by defining the concept development stage of the life-cycle model consisting of three successive phases, which are developed and discussed: needs analysis; concept exploration; and concept definition. This life-cycle model is used to develop an FPGA-based time-triggered Ethernet (TTE) switched data communication network for the non-safety division of MMIS system to provide real-time data transfer from the safety control systems to the non-safety division of MMIS and between the non-safety systems including control, monitoring, and information display systems. The original IEEE standard 802.3 Ethernet networks were not typically designed or implemented for providing real-time data transmission, however implementing a network that provides both real-time and on-demand data transmission is achievable using the real-time Ethernet technology. To develop the design effectively, context diagrams are implied. Conformance to the stakeholders needs, system requirements, and relevant codes and standards together with utilizing the TTE technology are used to analyze, synthesize, and develop the MMIS non-safety data communication network of the APR1400 nuclear power plant.