• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제38A권3호
• /
• pp.289-293
• /
• 2013

In the noncoherent methods for UWB-IR (ultra-wideband impulse radio), block coded modulation (BCM) is better than the transmitted reference (TR) systems in terms of the energy efficiency and data rate. However, even BCM suffers from the performance degradation in the presence of strong inter-frame interference and inter symbol interference. We propose the transmitted reference based on the BCM (TR-BCM) which is the hybrid system of TR and BCM. Performance evaluation shows that the performance of TR-BCM is better than that of BCM in the high SNR range.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제21권8호
• /
• pp.2063-2076
• /
• 1996

In this thesis, in order to apply a punctured convolutional codes to the trellis coded modulation(TCM), an efficient punctured trellis coded modulation(PTCM) based on the decomposition of the metric into orthogonal components is presented. Also, a simulation is performed in an additive white Gaussian noise(AWGN) and a rician fading channel modeling the mobile satellite channel. The PTCM combines punctured convolutional coding with MPSK modulation to provide a large coding gain in a power-limited or bandwidth-limited channel. However, in general the use of the punctured convolutional code structure in the decoder results in a performance loss in comparison to trellis codes, due to difficulties in assigning metrics. But, the study shows no loss in performance for punctured trellis coded MPSK in comparison to TCM, and what is more, the punctured convolutional codes results in some savings in the complexity of Viterbi decoders, compared to TCM of the same rate. Also, the results shows that the punctured trellis coded .pi./8 shift 8PSK is an attractive scheme for power-limited and band-limited systems and especially, the Viterbi decoder with first and Lth phase difference metrics improves BER performance by the mobile satellite channel.

• Journal of Korea Spatial Information System Society
• /
• 제5권2호
• /
• pp.83-89
• /
• 2003

In this study, a new coded targets that being suitable for a Mobile Mapping System and method of automated target recognition and coordinates determination of center point was developed, the purpose of a Mobile Mapping System is acquisition and logging data around the road for the camera calibration and the Exterior orientation of system, target installed previously and CCD cameras captured the image, target center point was observed by hands, but using coded target, target recognition and center point observation process will be automated effectively, in addition we keeped up the consistency of photo coordinates observation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권3A호
• /
• pp.248-256
• /
• 2004

Woerner had suggested an asynchronous trellis-coded DS/CDMA system based on a multi-sequence signaling, biorthogonal sequence, which is superior to single sequence signaling, such as M-ary PSK, due to their better cross-correlation properties. This paper analyzes and compares system performance between OPSM, a recently-presented multi-sequence signaling scheme, and biorthogonal sequence signaling. Interuser interference moments of the two schemes are derived and compared which verifies that OPSM, having smaller signature sequences per symbol than biorthogonal signaling, reduces cross-correlation. Numerical results compare the power and spectral efficiency of asynchronous trellis-coded DS/CDMA systems based on multi-sequence signaling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제8권4호
• /
• pp.332-341
• /
• 1997

In this paper, we propose an adaptive trellis-coded Multipe Quadrature Amplitude Modulation (ATCMQAM) for slowly varying Rayleigh fading channels. The proposed system adaptively controls the coding rate combined with modulation level of pargmatic approach to trellis-coded modulation according to the instantaneous fading channel conditions, and employs MQAM as modulation scheme. Results by computer simulation show that the proposed adaptive model using MQAM can realize higher quality transmission with the improvement more than 0.5~1 bit in average bit rate, and there is a coding gain of 2~5 dB, depending on the high SNR value, compared with the conventional adaptive model employing MPSK.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• 제31A권6호
• /
• pp.1-8
• /
• 1994

In this paper, in order to apply the idea MDPSK to TCM, we use signal set expansion and set partition by phase differences. Through this we propose the trellis-coded MDPSK. And the Viterbi decoder containing branch metrics of the squared Euclidean distance of the Lth order phase difference as well as the first order phase difference is introduced in order to improve the bit error rate(BER) in the differential detection of the trellis-coded MDPSK. The proposed Viterbi decoder is conceptually same to the sliding multiple symbol dection method which uses the branch metric with the first and Lth order phase differences. We investigate the performance of the uncoded DQPSK and the trallis-coded D8PSK in additive white Gaussian noise (AWGN) through the Monte Carlo simulation under the two cases of using and not using the Lth order phase difference metric. The study shows that trellis-coded 8DPSK is an attractive scheme for power and bandlimited systems while also improving the BER performance when the Viterbi decoder is employed to the Lth order phase order difference metric. This performance improvement has been obtained without sacrificing the bandwidth or the power efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제27권3B호
• /
• pp.196-201
• /
• 2002

OFDM(orthogonal Frequency Division Multiplex) modulates transmitting data with many carriers in parallel. As a result, high-speed data transmission is carried out and high spectral efficiency is provided by overlapping orthogonal frequencies. Therefore, OFDM is applied to many communication systems. In this paper, according to modulation methods(M-PSK and M-QAM), coded-OFDM wireless communication is simulated. Turbo code is used and two channels(virtual and real channel) are used. both channels have multipath delay spread, Gaussian noise, and peak power clipping. As a result of the simulation, coding gain is about 3dB and it is proved that M-QAM modulation is better than M-PSK. Start after striking space key 2 times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제22권4호
• /
• pp.648-661
• /
• 1997

This paper presents a new method for post-processing of coded images based upon the low-pass filtering followed by the projection onto the NQCS (narrow quantization constraint set). We also investigate how the proposed method works on JPEG-coded real images. The starting point of the QCS-based post-processing techniques is the centroid of the QCS, where the original image belongs. The low-pass filtering followed by the projection onto the QCS makes the images lie on the boundary of the QCS. It is likely that, however, the original image is inside the QCS. Hence projection onto the NQCS gives a lower MSE (mean square error) than does the projection onto the QCS. Simulation results show that setting the narrowing coefficients of the NQCS to be 0.2 yields the best performance in most cases. Even though the JPEG-coded image is low-pass filtered and projected onto the NQCS repeatedly, there is no guarantee that the resultant image has a lower MSE and goes closer to the original image. Thus only one iteration is sufficient for the post-processing of the coded images. This is interesting because the main drawback of the iterative post-processing techniques is the heavy computational burden. The single iteration method reduces the computational burden and gives us an easy way to implement the real time VLSI post-processor.

• Journal of Ship and Ocean Technology
• /
• 제9권4호
• /
• pp.35-46
• /
• 2005

The performance of optimisation methods, based on penalty functions, is highly problem- dependent and many methods require additional tuning of some variables. This additional tuning is the influences of penalty coefficient, which depend strongly on the degree of constraint violation. Moreover, Binary-coded Genetic Algorithm (BGA) meets certain difficulties when dealing with continuous and/or discrete search spaces with large dimensions. With the above reasons, Real-coded Micro-Genetic Algorithm (R$\mu$GA) is proposed to find the global optimum of continuous and/or discrete nonlinear constrained engineering problems without handling any of penalty functions. R$\mu$GA can help in avoiding the premature convergence and search for global solution-spaces, because of its wide spread applicability, global perspective and inherent parallelism. The proposed R$\mu$GA approach has been demonstrated by solving three different engineering design problems. From the simulation results, it has been concluded that R$\mu$GA is an effective global optimisation tool for solving continuous and/or discrete nonlinear constrained real­world optimisation problems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권3호
• /
• pp.999-1021
• /
• 2023

Differential spatial modulation uses the antenna index to transmit information, which improves the spectral efficiency, and completely bypasses any channel side information in the recommended setting. A generalized distributed multiple turbo coded-cooperative differential spatial modulation based on distributed multiple turbo code is put forward and its performances in Rayleigh fading channels is analyzed. The generalized distributed multiple turbo coded-cooperative differential spatial modulation scheme is a coded-cooperation communication scheme, in which we proposed a new joint parallel iterative decoding method. Moreover, the code matched interleaver is considered to be the best choice for the generalized multiple turbo coded-cooperative differential spatial modulation schemes, which is the key factor of turbo code. Monte Carlo simulated results show that the proposed cooperative differential spatial modulation scheme is better than the corresponding non-cooperative scheme over Rayleigh fading channels in multiple input and output communication system under the same conditions. In addition, the simulation results show that the code matched interleaver scheme gets a better diversity gain as compared to the random interleaver.