• Resources Recycling
• /
• v.9 no.6
• /
• pp.9-14
• /
• 2000

Comparing the adsorption characteristics of coconut shell activated carbon (CSAC) and waste paint activated carbon (WPAC), Freundlich adsorption isotherms of alkylbenzene sulfonate (ABS) obtained from the secondary treatment water of H company and effluent of D company were estimated q=23.12 $C^{0.42}$ , q=18.32 $C^{0.38}$ with WPAC and $q=36.76C^{1.37}$ /, q=26.67 $C^{0.42}$ with CSAC respectively. In the case of H company, breakthrough time of the ABS using CSAC by continuous experiment was estimated 680 minute md that of WPAC was 610 minute. In the case of D company effluent, CSAC was estimated 720 minute, and that of WPAC was estimated 640 minute to reach the breakthrough. From the above results, it is possible to replace the coco-nut shell activated carbon with wasted paint activated carbon.

• Journal of Korean society of Dental Hygiene
• /
• v.23 no.1
• /
• pp.25-31
• /
• 2023

Objectives: This study performed a comparative evaluation of the effects of oil pulling on the periodontal health of smokers. Methods: The experimental (15 subjects) and control (15 subjects) were provided coconut oil and distilled water, respectively. We evaluated the pocket depth (≥4 mm), bleeding on exploration, and Patient Hygiene Performance (PHP) index in both groups following the interventions. Clinical parameters were assessed at baseline, after 4 weeks, and after 8 weeks. Dry mouth and oral health-related quality of life were evaluated at baseline and after 8 weeks. Results: Bleeding on exploring in the control group decreased from 26.17 to 18.33 and from 26.07 to 12.53 in the experimental group (p=0.030), with significant differences in measurement time (p<0.001), and the interaction between group and measurement time (p=0.002). The PHP index in the control group decreased from 24.50 to 16.17 and from 24.00 to 9.83 in the experimental group (p=0.027), with significant differences in measurement time (p<0.001), and the interaction between group and measurement time (p=0.001). Furthermore, the experimental group showed a significant decrease in dry mouth (p<0.001) and a significant increase in oral health-related quality of life (p=0.025). Conclusions: The coconut oil intervention positively affected the periodontal health of smokers.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.431-437
• /
• 2011

Transparent liquid crystal gels with high oil content by fatty acid soap were investigated. The solubilization efficiency of the mineral oil was dependent on the process. The process of dropping water part into the solution of oil and surfactant was more efficient than the process of dropping water part into the surfactant solution and after that dropping oil. The fatty acid soap could not solubilize the high oil content, but under the certain range, addition of CDE (Coconut Diethanolamide), Arlacel 165 (Glyceryl Stearate/PEG-100 Stearate) and cetostearyl alcohol helped solubilize the high content oil. Also, the glycerin and water content had influence on the solubilization. Especially, higher oil content gel showed elastic feature.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.458-462
• /
• 2013

A drainage ditch is normally a component of drainage networks in farming systems to remove surplus water, but at the same time, it may act as a major conduit of agricultural nonpoint source pollutions such as sediment, nitrogen, phosphorus, and so on. The hybrid turbidity reduction system using biodegradable check dam and synthetic polymer was developed in this study to manage pollutant discharge from agricultural farmlands during rainfall events and/or irrigation periods. The performance of this hybrid system was assessed using a laboratory open channel sized in 10m-length and 0.2m-width. Various check dams using agricultural byproducts (e.g., rice straw, rice husks, coconut fiber and a mixture of rice husks and coconut fiber) were tested and additional physical factors (e.g., channel slope, flowrate, PAM dosage, turbidity level, etc.) affecting on turbidity reduction were applied to assess their performance. A series of lab experiments clearly showed that the hybrid turbidity reduction system could play a significant role as a supplementary of Best Management Practice (BMP). Moreover, the findings of this study could facilitate to develop an advanced BMP for minimizing nonpoint source pollution from agricultural farmlands and ultimately to achieve the sustainable agriculture.

• Korean journal of food and cookery science
• /
• v.32 no.1
• /
• pp.9-15
• /
• 2016

The changes of resistant starch (RS) contents of cooked rice with soybean and coconut oils under different storage conditions were investigated and RS contents were compared between the rice and cooker types. The japonica (Hopyeong) and the indica (Thailand) type rice were cooked (washed rice: water = 100: 130) using an electric cooker and a saucepan. The coconut oil and soybean oil (3%, based on rice, w/w) were added into cooking water before heating. The RS contents of freeze-dried cooked rice powders (newly-cooked rice, stored for 12 h in the refrigerator, microwave heating after storage for 12 h in the refrigerator) were measured by the AOAC method. The RS contents of cooked rice using a saucepan were higher than those using an electric cooker. The indica type cooked rice had a higher RS content than the japonica type cooked rice, regardless of storage conditions. However, addition of oil before cooking rice resulted in increased RS content on storage in the refrigerator. The highest RS content of the cooked indica type rice with soybean oil ($5.89{\pm}0.22%$) that was stored for 12 h in the refrigerator was analyzed. The results suggested that the cooked rice formed retrograded (RS3) and amylose-lipid complex (RS5) type RS; furthermore, the RS content is affected by storage conditions, rice, cooker and oil types.

• Journal of Korean Society on Water Environment
• /
• v.20 no.3
• /
• pp.256-264
• /
• 2004

Adsorption characteristics of three endocrine disruptors, amitrol, nonylphenol, and bisphenol-A, were evaluated depending on the type and service duration of activated carbon (AC). Bituminous coal-, wood-, and coconut-based coals were tested. Bituminous coal-based AC (BCAC) had the greatest sorption capacity for the three chemicals tested, followed by wood-based AC (WAC) for nonylphenol and coconut palm-based AC (CAC) for bisphenol-A. During the column test, amitrol removal efficiency increased over time, indicating that hydrophilic endocrine disruptors are biodegraded in the AC column. Removal efficiencies of hydrophobic compounds such as nonylphenol and bisphenol-A decreased over time since the main removal mechanism was adsorption. The order of the amitrol removal was: BCAC-5.9 yr, CAC-3.l yr > BCAC-2.2 yr > BCAC-virgin > CAC-virgin > WAC-virgin > WAC-3.l yr. In general, used AC had greater removals than virgin AC. The order of the bisphenol-A removal was: CAC-virgin > BCAC-2.2 yr > CAC-3.l yr > WAC-virgin > BCAC-5.9 yr > WAC-3.l yr. The order of the nonylphenol removal was: BCAC-virgin > WAC-virgin > CAC-3.1 yr, WAC-3.1yr> BCAC-2.2 yr > BCAC-5.9 yr > CAC-3.1 yr. Bituminous coal AC performed the best over time. Endocrine disruptors such as these three compounds appear to be removed effectively by activated carbon through biodegradation and adsorption. Wood and coal based among the virgin ACs and 3.1 years used wood base among the used ACs appeared the lowest carbon usage rate(CUR) for nonylphenol removal by prediction model. Virgin and used coconut base ACs except BCAC had the lowest CUR for removal Bisphenol-A. Biodegradation of nonylphenol and Bisphenol-A did not occurred during the 9,800 bed volume experiment period. BCAC had the highest biodegradation capacity of 46% for amitrol among virgin ACs and the used coal based ACs had 33-44% higher biodegradation capacity than virgin's for amitrol so biodegradation is the effective removal technology for hydrophilic material such as amitrol.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.4
• /
• pp.404-411
• /
• 2007

Adsorption performance of odorous compounds such as geosmin and 2-MIB on granular activated carbon were evaluated in this study. The coal-based activated carbon was found more effective than other carbons in adsorption of geosmin and 2-MIB. The wood-based virgin activated carbon was less effective than coconut- and coal-based carbon in adsorption nevertheless having larger pore volume and specific surface area than others carbons. The maximum adsorption capacity(X/M) of coal-based activated carbon for geosmin and 2-MIB was $1.2\sim1.9$ and $2.1\sim2.6$ times larger than coconut- and wood-based virgin activated carbon, respectively. Carbon usage rate (CUR) of coal-, coconut- and wood-based virgin activated carbons for geosmin and 2-MIB were 1.72 and 1.44 g/day, 1.72 and 2.05 g/day and 2.12 and 1.90 g/day, respectively. In the evaluation of adsorption isotherm of geosmin and 2-MIB for coal-, coconut- and wood-based virgin activated carbons, k value of 2-MIB was lower than geosmin, It menas 2-MIB is more difficult to remove by activated carbon adsorption than geosmin. The relationship of max. adsorption versus total pore volume of coconut- and wood-based virgin and used activated carbon for geosmin and 2-MIB were $y=264,459\times-79,047(R^2=0.95)$, $y=319,650\times-101,762(R^2=0.93)$.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.244-251
• /
• 2001

This study was performed to investigate the recovery efficacy of 2-methylisobomeol (2-MIB) and Geosmin, odor contaminants produced by algae, by pretreatment techniques, and also to investigate both adsorption characteristics and removal efficiency to get some information for the effective removal of 2-MIB and Geosmin by batch experiments. In pretreatment experiments, the best recovery efficiency of both odorants at 0.2 and $2\;{\mu}g/L$ in raw water was 30 mL of sampling size, 9 g NaCl for salting out headspace of sampling phase and 40 minutes of adsorption. At the best condition, the recovery efficiency of 2-MIB was 85% at $0.2\;{\mu}g/L$ and 95% at $2\;{\mu}g/L$, whereas the efficiency of Geosmin was lower than that of 2-MIB : 61% at $0.2\;{\mu}g/L$ and 81% at $2\;{\mu}g/L$. In batch experiments, the removal efficiency of the Geosmin and 2-MIB by adsorbents using distilled water were increased in comparison with raw water, the efficiency in raw water was little different by their concentrations. When these results were applied to the Freundrich adsorption isotherm, the K value of 2-MIB for zeolite, coal activated carbon, and coconut activated carbon was 0.671, 1.811, and 1.340, respectively, and the value of Geosmin was 0.6125, 1.771, and 1.5191, respectively. Thus the adsorption efficiency of 2-MIB and Geosmin was in the order of zeolite, coconut activated carbon, coal activated carbon.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1421-1432
• /
• 2018

Water soluble oil was obtained from the pyrolysis of coconut waste as a biomass at $600^{\circ}C$. It was studied that the combustion characteristics of bio-emulsion fuel by mixing and emulsifying 15~20% of water soluble oil which obtained from pyrolysis of coconut waste as a biomass and MDO(marine diesel oil) as a marine fuel. Engine dynamometer was used for detecting emissions, temperature, and power. The temperature of combustion chamber was decreased because the moisture in bio-emulsion fuel deprived of heat of evaporation in combustion chamber. While combustion, micro-explosion took place in the combustion chamber by water in the bio-emulsion fuel, MDO fuel scattered to micro particles and it caused to smoke reduction. The temperature reduction of combustion chamber by using bio-emulsion fuel reduced the NOx emission. The increasing of bio-oil content caused increasing water content in bio-emulsion fuel so total calorific value was reduced. So the characteristics of power was decreased in proportion to using the increasing amount of bio-emulsion fuel. Heavy oil as a marine fuel exhausts a lot of smoke and NOx. We expect that we can reduce the exhaust gas of marine engine such as smoke and NOx by using of bio-emulsion fuel as a marine fuel.

• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.20-31
• /
• 1998

There is a need for waste recycling. This study was carried out to investigate removal efficiency of TCE in water treatment with adsorbent made from coffee grounds which obtained after extraction of coffee through hot water. The removal of TCE in synthetic Waste water using adsorbents was examined varying dose, concentration and temperature on a laboratory scale. The results were as followed 1. As much as 95% TCE remogal was possible with adsorbent made from coffee grounds at an adsorbent dose over 2.5 g/l under the test conditions. 2. The removal rate of TCE was propotional to weight of adsorbent made from coffee grounds (0.025, 0.1, 0.3, 0.5 g). 3. In the effect of temperature, as temperature of wastewater was high, the rate of removal was increased. 4. Iodine number (865 mg/g) of adsorbent made from coffee grounds was not higher than that (1123 mg/g) of adsorbent made from coconut. But, in considering adsorption capacity, Iodine number was inapplicable to adsorbent made from coffee grounds. 5. Generally, Freundlich's equation applies to adsorption in wastewater. In case of TCE, slope (1/n) was 0.83, 1.06 and intercept (k) was 456.18, 405.19 at 150, 300 ppb respectively (average r=0.904, 0.933).