• 전기학회논문지
• /
• 제56권12호
• /
• pp.2196-2201
• /
• 2007

Materials used at microwave are usually used as a dielectric with a manufacturing purpose of printed circuit boards, etc. Complex permittivity of them can be measured from attenuation constant or propagation constant of a transmission line using a microstrip line with bulk type. But as the technique recently which can manufacture to have complex permittivity and permeability demanded using nonferrous metals for powder-type grows up, we need sensors and methods which can measure characteristics of powder-type materials. So far measuring methods of permittivity and permeability with waveguide or coaxial cable are used but they have faults which have a complex measurement method and are difficult to simultaneously measure permittivity and permeability. In this paper, a simultaneous measuring method of permittivity and permeability with 2-port coaxial cable and a new proposed calculation. The proposed 2-port coaxial cable is designed to be easy to insert materials and to have a wideband. We measure permittivity and permeability of magnetic powder(Ni-Fe-Mo, Ni-Fe) which reveal its characteristic at $0.3{\sim}1.3GHz$ to identify the proposed sensor.

• 한국통신학회논문지
• /
• 제12권1호
• /
• pp.1-8
• /
• 1987

본 논문에서는 요철형 공동공진기의 공진주파수를 모드결합법과 모드의 직교성을 이용하여 계산하였다. 요철형 공동공진기는 동축케이블과 원형도파관으로 구성되어 있으며 공진기의 공진주파수는 동축케이블부분의 내부도체길이를 가변시킴으로써 조정할 수 있다. 본 논문의 결과는 클라이스트론, 파장계 및 증폭기의 공진회로와 유전체 정수의 측정에도 사용할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.157-160
• /
• 1998

The analysis of a coaxial cable with periodic slots as a leaky-wave antenna is considered. The mode matching method and method of moments with Galerkin testing procedure is then used to obtain the determinantal equation for the unknown leaky-wave propagating constant. Both technigues allow the fields to be obtained in any region, and the radiation characteristics of the structure. By resorting to a suitable numerical techniques, it is possible to calculate the leaky-wave propagating constants and the radiation patterns. Numerical results demonstrate the validity of the technique.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.792-797
• /
• 2013

In a indoor microwave power distribution system, matching-type power dividing switch is proposed and designed with a various power dividing ratio. A matching coaxial cable probe is used behind the output probe for the reflecting power absorption. Reflecting characteristics of the matching coaxial cable probe are calculated by analyzing the S-parameter of this structure. Newly proposed matching-type switch shows a very low return loss less than -30dB at the operating frequency of 2.45GHz with a dividing power ratio of 50.2%. The simulated results by use of 3-stage power divider shows a good agreement with the theoretical estimation for the various combination of the different switching ratio.

• 한국전자파학회지:전자파기술
• /
• 제4권1호
• /
• pp.10-19
• /
• 1993

전파홉수체의 전파홉수능 측정방법은 기본적으로 다양한 마이크로파 측정법이 이용될 수 있지만, 레이다용전파홉수체의 경우, 전파의 주파수가높기 때문에 파장이 짧아서 측정오차가큰문제점이 있다. 따라서 본 연구에서는 전파홉수체의 전파홉수능을 실험적으로 간단히 측정할 수 있게 하기 위한 2 20rnrn¢동축관 생플흘더 및 Type-N connector로 부터 $20mm\phi$동축관으로의 변환Adaptor를 제작하여 전파홉수체의 설계 및 특성(전파홉수능) 평가에 사용할 수 있게 하였다. 또 구형도파관을 이용한 재료정수 측정법을 채용하여 시료의 형상동의 영향을 적게 받는 실측 방법에 관하여 검토하였다. 나아가서, 구형도파관을 이용한 재료정수 측정치를 반사감쇠량으로 환산한 전파홉수능파 동축관으로 측정한 전파흡수능의 주파수 특성을 구하여 거의 일치함을 밝히고 있다.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.149-158
• /
• 1998

동축 도파관 안테나에 접촉된 생체의 SAR 패턴을 계산하였고, 여기서 사용한 생체는 균질 및 4층 손실 인체 모델이다. 본 연구에서는 유한차분법 알고리즘과 MUR 및 GPML 흡수경계조건 방정식을 원통좌표계에서 유도 하였다. 또한 매개체에서 홉수전력 패턴을 얻기 위하여 동축 도파판 안테나와 생체모텔 사이의 결합을 유한차분 법에서 MUR과 GPML 흡수경계조건을 사용하여 해석하였다. 온도분포와 일치하는 SAR 분포는 MUR 및 G GPML 홉수경계조건을 사용한 유한차분법에서 정상상태 응답올 사용하여 각 영역에서 계산하였다. MUR 홉수 경계조건을 사용한 유한차분법의 SAR 패턴을 GPML 홉수경계조건을 사용한 유한차분볍의 SAR 패턴과 비교 하였다. 비교 결과, MUR 흡수경계조건을 사용한 SAR 패턴의 침투 깊이가 GPML 흡수경계조건을 사용한 S SAR 패턴의 침투 깊이보다 더 깊다는 것을 알 수 있었다. 이러한 현상은 GPML 흡수경계조건에서는 자유공간 의 손실을 고려했기 때문이다. 그렇지만 GPML 흡수경계조건을 사용한 SAR 패턴의 측방향으로의 퍼짐이 M MUR 홉수경계조건을 사용한 SAR 패턴보다 더 작다는 것을 알 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.14-20
• /
• 2005

In this paper, a technique is presented for broadbanding the bow-tie slot antenna fed by a CPW(coplanar waveguide). The bandwidth performance of existing bow-tie slot designs is greatly enhanced by optimizing the slot shape and properly adjusting the characteristic impedance of the coplanar waveguide feeding the slot. To connect the 50-ohm input coaxial line to the CPW feed line, a linear taper in the CPW is employed. The designed antenna shows a 3.5 $\~$ 10.0 GHz impedance bandwidth, a 3.5 $\~$ 6.0 GHz pattern bandwidth, and a 5.5 $\~$ 7.5 dBi gain over 3.5 $\~$ 6.0 GHz. Above 6.0 GHz, the antenna radiation pattern appreciably deviates from the typical dipolar pattern.

• ETRI Journal
• /
• 제36권6호
• /
• pp.889-893
• /
• 2014

This paper presents a high-performance dual-circularly polarized feed employing a dielectric-filled circular waveguide. Novel features are incorporated in the proposed feed, such as a dielectric rod radiator for high gain and good impedance matching; dual quarter-wave chokes for low axial ratio over wide angles and for low back radiation; an integrated septum polarizer; and two end-launch-type coaxial-to-waveguide transitions. The proposed feed shows excellent performance at 5.0 GHz to 5.2 GHz.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.557-562
• /
• 2017

In this paper, we show the design of a rotary joint transition for the X-band channel in a rotatable microwave communication system. The transition seems complicated to make a channel between two coaxial cables through a cylindrical waveguide. To make a broad-band performance in the X-band with low insertion loss and return loss given the constraint on the length and radius of this complicated-looking cylindrical structure, Genetic Algorithm optimization is adopted to check the validity of an intensive parametric study in the design. The structure is fabricated and tested to show how valid the design method is as well as good frequency responses.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.124-136
• /
• 2001

In this paper, we designed and manufactured the Ku-band circular waveguide antenna to do wireless communication with a ground radar as on-board antenna of missile. Using the MATLAB and the HFSS, we designed the circular polarizer which has a characteristic of circular polarization and broadband using the capacitive pin method, the feeder to feed coaxial line to circular waveguide, and a stopper to prevent a conductor material from being inserted. Then we simulated the designed antenna using the HFSS, obtained the gain and the radiation pattern. Because of a difficulty of manufacture, we established a manufacture process procedure. Antenna is manufactured with this procedure, test results of the manufactured antenna are the axial ratio of 1.37 ~ 1.72, the 3 ㏈ beamwidth of $72.23^{\circ}{\sim}78.54^{\circ},$ and the gain of 3.26 ~ 4.61 ㏈ within frequency band. We knew that these results are similar with simulation results. Also, we confirmed that the manufactured antenna is satisfied with requirement conditions through performance test, environmental test and flight test.