• 한국응용과학기술학회지
• /
• 제17권1호
• /
• pp.7-13
• /
• 2000

Quater polymer(MBHA) containing two types of acrylic functional group, acetoacetoxyethyl methacrylate(AAM) and 2-hydroxyethyl acrylate was prepared. Then, the MBHA was blended with polyisocyanate type Desmodur IL as a curing agent. Thereafter the mixture was cured at room temperature to get high solid acrylic/polyisocyanate. The MBHA was synthesized at $150^{\circ}C$ for 6 hours typically, and the final conversion reached 87-88%. Lowering Tg and increasing AAM amount in the MBHA resulted in high value of conversion. There was no difference in conversion with the variations of OH values. From the results of physical property tests, MIHS coating was proved to be a good automotive top-coating material.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.66.2-66.2
• /
• 2011

A polymer-based multi-walled carbon nanotube (MWCNT) field emission device was fabricated from a composite dispersion of MWCNTs and waterborne polymethyl methacrylate (PMMA). The waterborne PMMA synthesized through the emulsion polymerization method was added to minimize the reagglomeration of dispersed MWCNTs with surfactants in water, and increase the adhesion between the and the substrate. The field emission properties of the fabricated device were optimized by adjusting the density of the emitter and the adhesion between the MWCNTs and the substrate. These were done by controlling the polymer concentration added to the MWCNT dispersion, as well as the amount of spray coating on the substrate. The results confirm the successful fabrication of a polymer-based MWCNT field emission device with a low field of 1.07 $V/{\mu}m$ and a good electric field enhancement factor of 2445. The device was fabricated by adding 0.8 mg/mL of polymer solution to the MWCNT dispersion and applying 20 cycles of spray coating. Application of this same MWCNT/polymer composite solution to a flexible polymer substrate also resulted in the successful fabrication of an electric field emission device with uniform emission and long time stability.

• Carbon letters
• /
• 제1권3_4호
• /
• pp.170-177
• /
• 2001

Lithium intercalated carbon (LIC) are basically employed as an anode for currently commercialized lithium secondary batteries. However, there are still strong interests in modifying carbon surface of active materials of the anode because the amount of irreversible capacity, charge-discharge capacity and high rate capability are largely determined by the surface conditions of the carbon. In this study, the carbonaceous materials were coated with tin oxide and copper by fluidized-bed chemical vapor deposition (CVD) method and their coating effects on electrochemical characteristics were investigated. The electrode which coated with tin oxides gave the higher capacity than that of raw material. Their capacity decreased with the progress of cycling possibly due to severe volume changes. However, the cyclability was improved by coating with copper on the surface of the tin oxides coated carbonaceous materials, which plays an important role as an inactive matrix buffering volume changes. An impedance on passivation film was decreased as tin oxides contents and it resulted in the higher capacity.

• 산업기술연구
• /
• 제26권A호
• /
• pp.189-197
• /
• 2006

Water shortage as well as water control problems including urban flood and drought have led to developing technologies for rainwater utilization in order to provide a sustainable water supply. However, relatively few works have been done to improve the water quality during rainwater utilization. Therefore, in this study, the characteristics of rainwater were examined in terms of pollutant concentrations and outflow rate. A experimental rain and roof model($1m{\times}1m$) were produced to evaluate wash-off properties of pollutants. And rainfall intensity were standardized in 10 mm/hr, a experimental model roof catchment surface were coated in $TiO_2$ photocatalyst. Samples of runoff rainwater collected from a experimental model were analyzed for physicochemical parameters such as Turbidity, Suspended Solid, EC. The results show that the first flush of rainwater contains substantial amount of contaminants that potentially pollute the whole rainwater. Surface treatment of roof catchment area using $TiO_2$ photocatalyst allowed a better runoff property of rainwater because of its improved hydrophilicity.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권12호
• /
• pp.1808-1812
• /
• 2002

The present study was carried out to examine the efficiency of microcapsules and a stability of lactase in vitro in the simulated gastric and intestinal conditions. As a coating materials, medium-chain triacylglycerol (MCT) and polyglycerol monostearate (PGMS) were used. The highest efficiency of microencapsulation was found in the ratio of 15:1 as coating to core material with both MCT (91.5%) and PGMS (75.4%). In a subsequent experiment, lactose content was measured to study a microcapsule stability. Lysis of microcapsules made by MCT in simulated gastric fluid was proportionally increased such as 3% in pH 5 and 11% in pH 2 for 20 min incubation. In the case of PGMS microcapsulation, 11-13% of lactose was hydrolyzed at 20 min in all pHs and also very little amount (less than 3%) of lactose was hydrolyzed after 20 min in all pHs. The highest percentages of lactose hydrolysis in MCT and PGMS microcapsules were 68.8 and 60.8% in pHs 7 and 8 during 60 min, respectively. Based on our data, the lactase microcapsules seemed to be stable when they stay in the stomach, and hydrolyzed rapidly in small intestine where the bile acid was excreted.

• 유공압시스템학회논문집
• /
• 제1권3호
• /
• pp.7-13
• /
• 2004

The hydraulic pump for a Electro-hydrostatic Actuator for aircrafts should be able to quickly feed large volume of oil into hydraulic cylinder in order to reduce the response time. On the other hand, it should be also able to precisely dispense small amount of oil by low-speed operation so that the steady state position control error of the EHA can be accurately compensated. This paper is focused on the investigation how the plasma coating surface treatment of cylinder barrel with CrSiN can contribute to the reduction of low-speed friction torque of a bent-axis type piston pump. The results showed that the reduction of the friction torque was not remarkable, but that the anti-wear characteristics of the CrSiN-coated cylinder barrel were much better that those of the original one.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1188-1194
• /
• 2013

Transparent $TiO_2$ thin films have been prepared by sol-gel spin coating method. The sols used for deposition of thin films were prepared with different ethanol content. The effect of ethanol (solvent) concentration and annealing temperature on the performance of $TiO_2$ thin film solar cells has been studied. The results indicate that the as deposited films are amorphous in nature. $TiO_2$ thin films annealed at temperatures above $350^{\circ}C$ exhibited crystalline nature with anatase phase. The results also indicated that the crystallinity of the films improved with increase of annealing temperature. The high resolution transmission electron microscope images showed lattice fringes corresponding to the anatase phase of $TiO_2$. The band gap of the deposited films has been found to decrease with increase in annealing temperature and increase with increase in ethanol concentration. The dependents of photovoltaic efficiency of the dye-sensitized $TiO_2$ thin film solar cells (DSSCs) with the amount of ethanol used to prepare thin films was determined from photocurrent-voltage curves.

• 한국축산식품학회지
• /
• 제33권2호
• /
• pp.229-238
• /
• 2013

Lactic acid bacteria (LAB) are added to different food products for a long time due to health beneficial effects on human host. LAB is applied in dairy products, such as yoghurt, cheese, and various fermented products, and also in non-dairy products, such as sausages. However, reaching the human gut alive as well as in a sufficient cell amount to exert positive health effects is still a big challenge, due to LAB sensitive character and vulnerability against harsh and detrimental conditions in human digestive system. Keeping physiological activity of sensitive LAB strains alive is for the formulation of novel food products with a probiotic health claim of utmost interest, thus microencapsulation has been applied and investigated as a promising technique for a good and reliable protection. Microencapsulation allows reduced cell injury or cell loss by retaining cells within the encapsulating membrane and can be enforced by spray-drying, emulsion, extrusion, and a range of other technologies in combination with an appropriate coating material, such as alginate, chitosan, and mixture of these two polymers. In this review, established and well-studied microencapsulation techniques with their favored coating materials, as well as the recent applications of microencapsulated LAB into dairy products will be discussed.

• Journal of Pharmaceutical Investigation
• /
• 제40권6호
• /
• pp.363-366
• /
• 2010

Identification of compounds that function as P-glycoprotein (P-gp) substrates or inhibitors can facilitate the selection and optimization of new drug candidates. The purpose of this study is to optimize the experimental conditions for in vitro P-gp assay using LLC-GA5 cells, which is a well-known transformant cell line derived by transfecting LLC-PK1 with human MDR1. The amount of rhodamine123 transported by the LLC-GA5 and LLC-PK1 cells was evaluated under the following experimental conditions: 3 different types of transport media, colchicine pretreatment or nontreatment of the cells in the culture media, and with and without poly-L-lysine coating of the culture plates. The assay sensitivity was found to considerably differ depending on the diluents used in the transport media. P-gp-mediated transport in LLC-GA5 cells was most clearly characterized in the Hanks' balanced salt solution based transport media. The sensitivity of P-gp-mediated transport was not changed by colchicine pretreatment or poly-L-lysine coating of the culture plates.

• 한국표면공학회지
• /
• 제30권6호
• /
• pp.391-399
• /
• 1997

To figure out wheher the tribological properties of a hras-coating layer can be imporved by ion implantatio, TiN-coated SKD 11 61 were implanted with nitrogen ion and their wear peoperties were examined systematically. The amount of nitrgen ione implanted on the coating layer was $2 \times 10^{15},\;10^{16},\;10^{17},\;and\;10^{18}\;ions/\textrm{cm}^2$, respectively. X-ray diffraction revealed theintensity of the peaks belong TiN tended to increase as the ion dose increased, which implied that the implantation promoted the formation of TiN in the coated later. Howeverthe hardensity of the specimens increased then decreased again as the ion dose increased, resulting in a obvious drop of the hardness for the ion does of $2 \times 10^{18}\;ions/\textrm{cm}^2$<\TEX>. While the adhesion of the coated layer of SKD 61 was excllent regrdless of the implatation, the adhesion of the later of SKD 11 was apparently improved by the implantation. The overall wear properties of SKD 11 was better than that of SKD 61, and the best result was yielded at the ion dose of $2 \times 10^{15}\;ions/\textrm{cm}^2$<\TEX>.