• Journal of Korean Society for Atmospheric Environment
• /
• 제16권E호
• /
• pp.39-46
• /
• 2000

Volatile Organic Compounds (VOCs) are considered as the precursors of atmospheric ozone and photochemical smog formation. In particular, chemical plants have produced a lot of VOCs and thus they have been forced to reduce or remove air emissions from the on-site chemical facilities. For the effective removal of VOCs produced in the chemical plants, the authors employed a titanium oxide(TiO$_2$) mediated photo-catalytic oxidation method. The initiation methods employed in this study to produce oxygen radicals for th photo-catalytic oxidation of the VOCs were Ultra-Violet(UV), Non-Thermal Plasma(NTS), and a combination of Uv and NTP. This study focused on a comparison of the removal efficiencies of VOCs as a function of the initiation method such as NTP and/or UV techniques. Removal efficiency change of VOCs as was investigated as a function of the wavelength of the UV lamp(254, 302, and 365 nm) and the degree of TiO$_2$ coating (10 and 30%). In this study, it was identified that removal efficiencies if the VOCs under the normal air environment were much better than those under the nitrogen gas environment containing small amount of oxygen. Removal efficiency by NTP technique was much better than the UV or the combination of UV and NTP techniques. In a comparison if UV wavelengths employed, it was found that shorter wavelength showed better removal efficiency, compared with longer ones. When the removal efficiencies of VOCs were compared in terms of the degree of TiO$_2$ coating, the higher TiO$_2$coating showed better removal efficiency that the lower TiO$_2$ coating

• 한국분말재료학회지
• /
• 제21권4호
• /
• pp.266-270
• /
• 2014

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction of pores. In particular, open, penetrating pores are necessary for industrial applications such as in high temperature filters and as a support for catalysts. In this study, Fe foam with above 90% porosity and 2 millimeter pore size was successfully fabricated by a slurry coating process and the pore properties were characterized. The Fe and $Fe_2O_3$ powder mixing ratios were controlled to produce Fe foams with different pore size and porosity. First, the slurry was prepared by uniform mixing with powders, distilled water and polyvinyl alcohol(PVA). After slurry coating on the polyurethane(PU) foam, the sample was dried at $80^{\circ}C$. The PVA and PU foams were then removed by heating at $700^{\circ}C$ for 3 hours. The debinded samples were subsequently sintered at $1250^{\circ}C$ with a holding time of 3 hours under hydrogen atmosphere. The three dimensional geometries of the obtained Fe foams with an open cell structure were investigated using X-ray micro CT(computed tomography) as well as the pore morphology, size and phase. The coated amount of slurry on the PU foam were increased with $Fe_2O_3$ mixing powder ratio but the shrinkage and porosity of Fe foams were decreased with $Fe_2O_3$ mixing powder ratio.

• Journal of Periodontal and Implant Science
• /
• 제33권4호
• /
• pp.651-671
• /
• 2003

The influence of calcium phosphate (Ca-P) coating on the bone response of titanium implants was investigated two types of titanium implants, i.e. as -machined ,as -machined with Ca-P coating, were prepared. The Ca-P coating produced by OCT Inc technique. These implants were inserted into the left and right femur of beagle dog, After implantation periods of 3 days, 1weeks, weeks, 4weeks, 8weeks, 12weeks. 24weeks, the bone-implant interface was evaluated histologically, histomorphometrically , and removal torque. Histological evaluation revealed no new bone formation around different implant materials after 2weeks of implantation. After 4 weeks, Ca-P coated implants showed a higher amount of bone contact than either of the non coated implants. After 12weeks, bone healing was almost completed. And implant were removed by reverse torque rotation with torque-measuring device. Mean torque values for 4weeks control were 2.375Kgf.cm and experimental were 2.725Kgf.cm. And mean torque values for 8weeks control were 1.25Kgf.cm and experimental were 1.0Kgf.cm On the basis of these findings, we concluded that deposition of a Ca-P coating on an implant has a beneficial effect on the bone response to this implant during the healing phase. Besides implant surface conditions the bone response is also determined by local implant site condition.

• 전기화학회지
• /
• 제6권2호
• /
• pp.103-112
• /
• 2003

리튬이차전지 음극활물질로 사용되는 합성흑연입자에 여러종류금속을 코팅하여 그 전기화학적특성을 조사하였으며, 구체적인 코팅방법으로는 가스분산스프레이 코팅법을 적용하였다. 본 연구범위내에서 금속을 코팅한 입자로 제조된 전극은 충방전시 형성되는 계면저항을 감소시킴으로서 결과적으로 원시료에 비해서 높은 방전용량을 나타내었다. CV실험을 통해서 은과 주석은 리튬과의 합금반응을 확인할 수 있었으나, 2.5 중량$\%$ 이하의 낮은 코팅량을 고려했을 때, 높은 분산도를 지닌 금속 물질의 코팅을 통한 전극 활물질 표면의 균일한 전도도의 증가가 주요원인인 것으로 사료되었다. 단일계 금속으로 코팅하였을 경우 은코팅한 전극활물질이 가장 높은 방전용량과 사이클특성을 나타내었고, 은을 기본으로 하는 이성분계에서는 은-니켈전극이 가장 높은 고율특성을 나타내었다.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.43-48
• /
• 2015

Silver nanowire (AgNW) is a material that is increasingly being used for transparent electrodes, as a substitute for indium tin oxide (ITO), owing to its flexibility, high transmittance to sheet resistance ratio, and simple production process. This study involves manufacturing large-area organic photovoltaic cells (OPVs) deposited on AgNW electrodes. We compared the efficiency of OPVs with ITO and AgNW electrodes. The results verified that an OPV with an AgNW electrode performed better than that with an ITO electrode. Furthermore, by using the knife coating method, we successfully fabricated large-area OPVs without the loss of efficiency. Use of AgNW instead of ITO demonstrated that an OPV could be produced on various substrates by the solution process method, dropping the productions costs significantly. Additionally, by using the knife coating method, the process time and amount of wasted solution are reduced. This leads to an increase in the efficient fabrication of the OPV.

• 공업화학
• /
• 제8권2호
• /
• pp.252-261
• /
• 1997

여러 종류의 용제와 수지용액에 있어서의 $CaCO_3$ 안료의 분산 안정성을 Dynometer를 이용하여 조사하였다. Dynometer를 이용하여 비교적 단시간에 분산계의 분산 안정성을 평가할 수 있었으며, Dynometer를 이용한 분산 안정성 평가로부터 구한 $CaCO_3$ 안료의 용해성 파라미터, ${\delta}$는 11.62(${\delta}_d=8.04$, ${\delta}_p=5.05$, ${\delta}_h=6.70$)이었다. 안료와 친화력이 약한 용제가 첨가되는 경우 수지 용액내에서의 안료표면에의 수지 흡착층을 증가시켜 수지 용액내에서의 분산 안정성을 증가시켰다. 수지 용액 제조시 소량 첨가된 용제도 안료를 포함한 전체 분산계의 유동성과 분산 안정성에 큰 영향을 미친다는 것을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.683-688
• /
• 2013

Candidate coating materials for re-usable metallic nuclear fuel crucibles, TaC, TiC, ZrC, $ZrO_2$, and $Y_2O_3$, were plasmasprayed onto a niobium substrate. The microstructure of the plasma-sprayed coatings and thermal cycling behavior were characterized, and U-Zr melt interaction studies were carried out. The TaC and $Y_2O_3$ coating layers had a uniform thickness, and high density with only a few small closed pores showing good consolidation, while the ZrC, TiC, and $ZrO_2$ coatings were not well consolidated with a considerable amount of porosity. Thermal cycling tests showed that the adhesion of the TiC, ZrC, and $ZrO_2$ coating layers with niobium was relatively weak compared to the TaC and $Y_2O_3$ coatings. The TaC and $Y_2O_3$ coatings had better cycling characteristics with no interconnected cracks. In the interaction studies, ZrC and $ZrO_2$ coated rods showed significant degradations after exposure to U-10 wt.% Zr melt at $1600^{\circ}C$ for 15 min., but TaC, TiC, and $Y_2O_3$ coatings showed good compatibility with U-Zr melt.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.403-409
• /
• 2012

Poly (carbonate diol), isophrone diisocyanate와 dimethylol propionic acid로 부터 제조된 polyurethane prepolymer의 말단 NCO기를 aniline으로 capping시켜 aniline terminated waterborne polyurethane dispersion (ATWPUD)을 합성하였다. 이 ATWPUD와 물에 분산되어 있는 multi-walled carbon nanotube (MWCNT)를 혼합시켜 전도성 코팅 용액을 제조한 후, 이것을 polycarbonate 기재 위에 도포하여 코팅 막을 형성하였다. ATWPUD와 MWCNT를 혼합하여 얻어진 코팅 막의 표면저항 값은 $10^{7.6}{\sim}10^{7.7}{\Omega}/cm^2$로 순수한 waterborne polyurethane dispersion (WPUD)과 MWCNT의 혼합물로부터 제조된 코팅 막의 $10^{10.9}{\Omega}/cm^2$ 보다 우수한 전기전도도를 나타내었다. 또한 ATWPUD에 첨가되는 MWCNT의 양이 증가될수록 코팅 막의 전기전도도는 증가하였지만 연필경도 및 부착력은 감소되었다.

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.363-369
• /
• 2019

This study developed electroconductive textiles by coating polypyrrole to PET nonwoven-based Polyvinyl Alcohol (PVA) nanoweb made by electrospinning and applying the developed electrotextiles as ECG Electrodes. To find the optimum coating conditions for high electrical conductivity, the ratios of 2.6-Naphthalenedisulfonic acid with Disodium Salt (NDS) vs Ammonium Persulfate (APS) as an oxidant and a doping agent in the solution were changed from 3:7 to 7:3; the immersion time of the specimen in the solution was 1 hour. PVA nanowebs coated with polypyrrole under various conditions were filmed with FE-SEM. FT-IR analysis was also performed to examine the presence of polypyrrole nanoparticles in the PVA nanoweb. The electrical resistance of the treated specimens were measured with a Multimeter. Consequently, the PVA Nano Web was undamaged even after heat treatment that allowed for coating. Uniform polypyrrole nanoparticles then formed on the surface of the PVA nanoweb after coating. The measured electrical resistance was shown to be at least $12K{\Omega}/{\Box }$ from a maximum of $3,456K{\Omega}/{\Box }$. The proper amount of NDS content had a positive effect on the conductivity improvement of electroconductive textiles; in addition, the highest electrical conductivity was achieved with a ratio of 3:7 between NDS and APS.

• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.59-64
• /
• 2014

전해질로 $Na_2SiO_3$을 사용하여 A1050 알루미늄 판재를 pulse 폭 $ 2000{\mu}sec$, impulse 420 V, 400 ${\mu}$sec의 unipolar pulse로 플라즈마 전해 산화 코팅(plasma electrolytic oxidation coating)을 하여 산화 피막을 2, 5, 15, 30분에 따라 형성시킨 다음 산화피막을 분석하였다. 표면에 형성된 산화물의 결정상은 ${\alpha}-alumina$와 ${\gamma}-Alumina$로서 시간에 따른 변화는 없었다. 반응 초반에는 ${\gamma}-Alumina$가 많이 생성되었지만 시간이 갈수록 ${\gamma}-Alumina$의 양에는 변화 없이 ${\alpha}-alumina$가 많이 생겨남을 알 수 있었다. 이런 결과는 micro plasma에 의해서 ${\gamma}-Alumina$가 우선 생성되고, 이후 계속되는 micro plasma의 열에 의해서 ${\alpha}-alumina$로의 전이가 일어나기 때문으로 판단된다.