• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.315-323
• /
• 2018

Fossil fuel combustion during fishing activities is a major contributor to climate changes in the fishing industry. The Tier1 methodology calculation and on-site continuous measurements of the greenhouse gas were carried out through the use of fuel by the coastal and offshore gillnet (blue crabs and yellow croaker) and trap (small octopus and red snow crab) fishing boats in Korea. The emission comparison results showed that the field measurements are similar to or slightly higher than the Tier1 estimates for coastal gillnet and trap. In offshore gillnet and trap fisheries, Tier1 estimate of greenhouse gases was about $1,644-13,875kg\;CO_2/L$, which was more than the field measurement value. The $CO_2$ emissions factor based on the fuel usage was $2.49-3.2kg\;CO_2/L$ for coastal fisheries and $1.46-2.24kg\;CO_2/L$ for offshore fisheries. Furthermore, GHG emissions per unit catch and the ratio of field measurement and Tier1 emission estimate were investigated. Since the total catch of coastal fish was relatively small, the emission per unit catch in coastal fisheries was four to eight times larger. The results of this study could be used to determine the baseline data for responding to changes in fisheries environment and reducing greenhouse gas emission.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.611-622
• /
• 2007

In the design and construction of the coastal/offshore structures, it is very important to evaluate the geotechnical characteristics of marine soils, which support the structures. Although the offshore site investigation is much more difficult than onshore, safe and precise jobs have not been accomplished in Korea because of the insufficiency of the test equipments especially for the site with deep water depth. The main objective of this study is to develop a new type of marine cone penetration testing(CPT) system, which can be utilized to even deep sea and high depth of soil layer. The system is one of seabed types and employs the conventional cone, which shows more reliable results than miniature cone. The most important parts of the marine CPT including continuous rod system, cone penetration system with wheel drive, automatic cone rod assembly/dissembly system etc., were designed and manufactured. Some tests to verify the developed marine CPT system were performed at both onshore and offshore sites as well as mechanical test in laboratory. The test results show the consistent and promising performance of the new equipment, and thereafter the system would be applicable to various sites with practical/economical advantages.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1403-1415
• /
• 2011

To understand the transport of anchovy egg-larvae, an integrated model consisting of a hydrodynamic model and a three-dimensional Lagrangian diffusion model was used for the anchovy Engraulis japornicus egg-larvae trace. Fist, in order to determine the circulation characteristics of the South Sea of Korea, residual flow according to tide, density and wind effect was investigated. In offshore regions, tide-induced residual current tends to flow eastward during the spring tide and westward during the neap tide. Residual flow is irregular due to the bottom topography in the coastal area. No special tendency was apparent in the open sea. Especially, the flow in the offshore regions showed results similar to that of the Tsushima Warm Current. The transport of anchovy egg-larvae is decided the physical properties of sea water. It is estimated that anchovy eggs spawned near the Jeju Island travels offshore, rather than to coastal areas, and grow in the front area between the coastal sea and offshore regions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.1
• /
• pp.12-19
• /
• 2017

There is a need to substitute offshore met-mast with remote sensing equipment such as wind lidar since the initial installation and O&M costs for offshore met-mast are quite high. In this study, applicability of wind lidar is verified by intercomparison test of wind speed and direction data from offshore met-mast and wind lidar for simultaneous operational period. Results at various heights show no statistical difference in trend and size and data from wind lidar is found to be more accurate and have less error than data from offshore met-mast where error from structural shading effect is significant.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.5
• /
• pp.179-186
• /
• 2021

We need measures that can come up with alternative about fishery living zone and enhance local acceptance for responding to the increase in the proportion of renewable energy production and construction of 12GW Offshore wind power according to Korea's Renewable Energy 3020 initiative and Korean-version New Deal. In this study, We suggest that differentiation plans of co-location model in connection with offshore wind power generation suitable for the East Sea. The East Sea is an optimal site for building of a floating offshore wind power generation(FOWPG) field. It is expected that economic effects like energy production, aquatic resource development and tourism industrialization by farming bluefin tuna which is high valued fish and suitable for offshore aquaculture on public waters in FOWPG field. And we can confirm that budget reduction, smart management by sharing operation management technology and increase in fishermen income.

• Journal of Environmental Impact Assessment
• /
• v.18 no.3
• /
• pp.185-193
• /
• 2009

This study documented and diagnosed the status and problems of coastal dredging and offshore disposal of dredged sediments in South Korea to improve assessment procedures for marine environmental impacts and develop effective management systems. A total of $729({\times}10^6)m^3$ of coastal sediment was dredged in the harbors during the period of 2001-2008. Most of dredged sediment was disposed to the land dumping sites whereas ocean disposal accounted for less than 5%. Ocean disposal areas were especially concentrated to the exclusive economic zone (EEZ) in the southeast of Busan, which is not only an important fishing area for fishermen, but also considered to be spawning and nursery ground for some commercial fish species. To minimize negative impacts of dredging and ocean disposal of coastal sediment on marine ecosystem and potential strife among coastal users, we suggest 1) in development projects involving ocean disposal, it should be mandatory to propose careful reuse plans in the land, and 2) guidelines of environmental assessment and consequence management programs should be developed and implemented.

• Journal of Environmental Science International
• /
• v.18 no.8
• /
• pp.847-855
• /
• 2009

As a part of effort to establish an offshore wind resource assessment system of the Korean Peninsula, a numeric wind simulation using mesoscale climate model MM5 and a spatial distribution of offshore wind extracted from SAR remote-sensing satellite image is compared and analyzed. According to the analyzed results, the numeric wind simulation is found to have wind speed over predication tendency at the coastal sea area. Therefore, it is determined that a high-resolution wind simulation is required for complicated coastal landforms. The two methods are verified as useful ways to identify the spatial distribution of offshore wind by mutual complementation and if the meteor-statistical comparative analysis is performed in the future using adequate number of satellite images, it is expected to derive a general methodology enabling systematic validation and correction of the numeric wind simulation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.14 no.2
• /
• pp.191-212
• /
• 2002

The economic and social bad influences of the illegal fishery bring about the results of the fishery resources exhaustion, of the fishery disorder and of the obstruction to sound management for fishery. The typical illegal fishery conducted in the coastal and offshore area of Korea can be divided as follows; fishery conducted by legally unauthorized method, fishery without permission from the Government, and fishery conducted in contravention of the laws and regulations concerning the fishing vessel, fishing gear and fishing method etc. The major reasons of origination of the illegal fishery in the coastal and offshore area of Korea are; Firstly, almost of the fishermen are poorly equipped in economical scale, Secondly, it is very easy to approach the illegal fishery because the domiciliation condition of the fishing village is deteriorated. Thirdly, almost of the fishermen are lacking in lawabiding spirit. Fourthly, the insolvent and unstable fisheries management policy with the lukewarm enforcement of the fisheries laws and regulations by the Government. Fifthly, the small scale family supporting fisheries are widespreaded. Sixthly, to retrieved the economical difficulties the fishermen are easily led astray the illegal fishery. As a conclusion the authors made some suggestions to stamp out the illegal fishery by this study. For the first, temptation fishermen into lawabiding fishery through intensification of the penal regulations is required. Second, simplification of the fishery type through combination of resemble fishing methods is required. Third, actual improvement of the fundamental fishery permission regime is required. Fourth, Introduction of the self-regulating or co-management system for the fishery management is required.

• Structural Monitoring and Maintenance
• /
• v.4 no.2
• /
• pp.153-173
• /
• 2017

An improved method is presented to estimate the axial force of a bar member with vibrational measurements based on modified Timoshenko beam theory. Bending stiffness effects, rotational inertia, shear deformation, rotational inertia caused by shear deformation are all taken into account. Axial forces are estimated with certain natural frequency and corresponding mode shape, which are acquired from dynamic tests with five accelerometers. In the paper, modified Timoshenko beam theory is first presented with the inclusion of axial force and rotational inertia effects. Consistent mass and stiffness matrices for the modified Timoshenko beam theory are derived and then used in finite element simulations to investigate force identification accuracy under different boundary conditions and the influence of critical axial force ratio. The deformation coefficient which accounts for rotational inertia effects of the shearing deformation is discussed, and the relationship between the changing wave speed and the frequency is comprehensively examined to improve accuracy of the deformation coefficient. Finally, dynamic tests are conducted in our laboratory to identify progressive axial forces of a steel plate and a truss structure respectively. And the axial forces identified by the proposed method are in good agreement with the forces measured by FBG sensors and strain gauges. A significant advantage of this axial force identification method is that no assumption on boundary conditions is needed and excellent force identification accuracy can be achieved.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.4
• /
• pp.392-401
• /
• 2019

This study describes how the illustration book of Korean coastal and offshore fishing boats was published. The illustration book provides information on fisheries which need boats for their fishing operation. The book contains 25 fishing boats belonging to 15 offshore fisheries and six boats belonging to five coastal fisheries totalling 31 boats belonging to 20 kinds of fisheries. Until now, no books were available in Korea on fishing boats which provided illustrated descriptions of their use in fishing. We carried out field and literature surveys of fishing boats for three years (2016-2018) and the results were compiled into three-dimensional modeling images with schematic drawings of fishing boats, along with text explanations. The particulars and technical drawings of lines, general arrangement (GA), fishing gears and methods are collected and summarized. All fishing boats are modeled with 3D color graphics. The particulars and names of the main items of the fishing equipment are presented besides structural parts. In addition the fishing gear, fishing season and grounds, number of crews and target species for each boat are correctly described. The illustration book of Korean coastal and offshore fishing boats will contribute to understanding the current status of fishing techniques in Korea and will assist in developing new types of fishing boats.