• 한국지반환경공학회 논문집
• /
• 제10권3호
• /
• pp.5-12
• /
• 2009

본 연구는 발전소의 적치장에서 채취한 석탄회의 정적 및 동적 강도를 제시하였다. 석탄회는 주로 저회로 이루어져 있으며 정적 및 동적 강도를 평가하기 위하여 NGI형 단순전단시험, 반복단순전단시험 및 직접전단시험을 수행하였으며, 이러한 시험으로부터의 강도를 모래의 강도와 비교하였다. 본 연구에 사용된 석탄회 속에 있는 저회는 입도분포에 의하면 모래로 분류되었으며 모래보다 높은 강도 특성을 보였다. 석탄회를 토목공사에 활용되기 위해서 사질토와 석탄회를 50:50의 비율로 배치플랜트에서 섞어 사용하는 것은 사질토층과 석탄회층을 교대로 층별 시공하는 것보다 비효율적이다. 혼합시공과 층별시공을 모사하기 위하여 모래와 석탄회가 50:50으로 조성된 시료를 준비하였다. 시험결과 혼합에 의한 시료가 층별시료보다 약간 큰 정적 및 동적 강도를 나타내었다. 높은 강도는 주로 저회의 모난 입자로부터 기인된 것으로 보인다. 혼합시료에서 액상화시의 반복응력비는 반복횟수가 증가함에 따라 층별시료보다 급격히 감소하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.166-166
• /
• 1982

This study has been made to make an observation regarding present status of the coal mine props which is desperately needed for coal production, despite of great shortage of the timber resources in this country, and investigate the effects of diffusion process on the decay resistances of the mine props as applied preservatives of Malenit and chromated zinc chloride. The results are as follows. 1. Present status of the coal mine props Total demand of coal mine props in the year of 1975 was approximately 456 thousand cubic meters. The main species used for mine props are conifer (mainly Pinus densiflora) and hardwood (mainly Quercus). Portions between them are half and half. With non fixed specification, wide varieties of timber in size and form are used. And volume of wood used per ton of coal production shows also wide range from 0.017 cubic meter to 0.03 cubic meter. 2. Decay resistance test a) The oven dry weight decreased between untreated specimen and treated specimen has not shown any significantly, although it has shown some differences in average values between them. It may be caused by the shorter length of the test. b) The strength of compression test between untreated specimen and treated specimen has also shown the same results as shown in case of weight decrease. Reasons assumed are the same. c) The amounts of the extractives in one percent of sodium hydroxide (NaOH) between untreated and treated specimen have shown the large value in case of untreated specimen than that of treated. 3. The economical benifit between untreated and treated wood when applied in field has seen better in long tenn base in case of treated wood, although the primary cost of treated wood add a little bit more cost than that of the untreated wood.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.137-145
• /
• 2004

Limestone zone in korea have been distributed to diagonal line so that it is wide from the Gangwondo to the Jeonlanamdo. The limestone cavity and fractured zone were formed by chemical weathering. Limestone cavity and fractured zone was reinforced with cemented milk(w/c=60%)by high pressure jet grouting by tripple -pipe to establish bridge foundation on the ground condition like limestone cavity. To analyze property of limestone and solid of cement milk(w/c=65%), mixed solid of cement, core NX size in the limestone cavity and fractured zone and compressive strength. Seismic tomograpy exploration was pcrforn1cd to analyze deformation modulus of limestone. The analysis suggests that deformation modulus of limestone has effect on uniaxial compressive strength, seismic velocity, seismic elasticity modulus. Average static elasticity modulus of limestone is $5.08{\times}10^5kgf/cm^2$, cement and coal mixed solid is $0.25{\times}10^5kgf/cm^2$, $0.095{\times}10^5kgf/cm^2$. Average seismic velocity of limestone is 5.240m/sec, cement and coal mixed solid is 2,211.3m/sec, 1,447.5m/sec. Average uniaxial compressive strength of limestone was $1,221.3kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $125.22kgf/cm^2$, $35kgf/cm^2$ each other. Average friction angle of limestone was $49.14^{\circ}$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $38.39^{\circ}, 25.83^{\circ}$ each other. Average cohesion of limestone was $137.7kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $23.5kgf/cm^2$, $15.5kgf/cm^2$ each other. Average deformation modulus of limestone was $2.84{\times}10^5kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $0.4{\times}10^5kgf/cm^2, 0.12{\times}10^5kgf/cm^2$ each other. It was analyzed that the elasticity and uniaxial compressive strength, seismic velocity of solid of cement milk mixed limestone pieces and coal had an highly interrelation regardless of existence of limestones pieces and coal but it had shown that limestones had an lower interrelation. In case of field seismic velocity and deformation of limestone, SIC solid of cement milk mixed with coal and limestone pieces had an highly interrelation.

• 자원리싸이클링
• /
• 제14권4호
• /
• pp.3-9
• /
• 2005

석란광산에서 발생되는 선탄폐석을 효율적으로 이용하기 위하여 세라믹스 원료 소재로의 활용 가능성을 고찰하였다. 석탄폐석의 첨가량이 증가함에 따라 소성 시험편의 소성수축률이 저하되고, 압축강도는 약간 감소하는 등의 효과와 선탄페석에 함유되어 없는 탄소분의 연소에 의한 기공의 증가로 제품의 경량화도 가능한 것으로 판단되었다. 선탄폐석의 첨가량을 변화시켜 $1,150^{\circ}C$ 이상에서 소성한 경우 흡수율은 $10\;wt\%$ 이하를 나타내었고, 압축강도는 모두 21MPa이상으로 KS L 4201에서 규정한 1종 점토벽돌의 기준에 모두 적합함을 확인할 수 있었다.

• 청정기술
• /
• 제19권4호
• /
• pp.464-468
• /
• 2013

본 연구에서는 석탄 종류, 저등급석탄으로부터 첨가제의 종류, 입도분포 및 건조 방법에 따른 석탄-물 혼합연료(coal water fuel, CWF)의 고체함유량을 높이고자 하였다. 건조 방법에는 열풍 건조 방법(flash drying, FD), 유동층 건조 방법(fluidized bed, FB), 유중 건조 방법(oil deposit stabilized, ODS)을 사용하였다. 석탄 종류에 의해서 고체함유량 차이는 최대 20% 이상 보였다. 또한, CWF을 제조할 때 넣어주는 첨가제의 종류를 다르게 하여 실험한 결과 첨가제에 의해서 5%까지 효율을 더 높일 수 있었다. 석탄의 입도분포는 $75{\mu}m$ 이하의 미분탄이 80% 함유되어야 CWF의 성능이 향상되는 것을 관찰하였다. 3가지 건조 방법을 활용하여 CWF를 제조해본 결과, 안정화시킨 유중 건조 석탄이 원탄에 비하여 12% 정도 더 높은 고체함유량을 갖는 CWF를 제조할 수 있는 것을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.85-95
• /
• 2018

Water affects the mechanical properties of coal and stress wave propagation. To comprehensively investigate the effect of water content on the properties of coal, laboratory tests including X-Ray Diffraction (XRD) analysis, P-wave test, S-wave test, static and dynamic compression test with different water contents were conducted. The compressive strength, elastic modulus and failure strain and their mechanism of coal specimen under coupled static-dynamic load with the increased water content were observed. Meanwhile, energy transmission and dissipation characteristics of a stress wave in coal specimens with different water contents under dynamic load and its relation with the failure features, such as fragmentation and fractal dimension, of coal was analyzed. Furthermore, the dynamic interpretation of water infusion to prevent coal burst based on water infusion model of coal seam roadway was provided.

• 한국결정성장학회지
• /
• 제20권3호
• /
• pp.147-152
• /
• 2010

본 연구에서는 인공골재를 제조하기 위하여 저급 점토에 석탄회(Fly Ash와 Bottom Ash)를 각각 첨가하여, 여러 분석기기(SEM, XRD, XRF, TG-DTA, Dilatometer, UTM)를 이용하여 물리 화학적 특성을 조사하였다. Fly ash, bottom ash, clay의 화학조성은 $SiO_2$가 33.01, 53.73 및 68.36 wt% $Al_2O_3$는 28.54, 32.42 및 18.12 wt%와 이외에 $Fe_2O_2$와 알카리 성분 등이 함유하고 있다. 소성에 의한 인공골재의 치밀화 과정을 관찰하기 위해 Dilatometer를 측정하였다. 시편들은 $850^{\circ}C$ 부근에서 서서히 수축이 시작되어 $1100^{\circ}C$ 부근에서 급격하게 수축하는 것을 볼 수 있었다. 소성온도와 배합조성에 따른 시편의 결정상을 알아보기 위하여 $1150^{\circ}C$에서 30분간 열처리 하였으며 fly Ash를 사용한 시편의 주 결정상은 quartz, anorthite, albite상이 관찰되었고 bottom ash를 사용한 시편은 quartz, anorthite, mullite가 관찰되었다. $1150^{\circ}C$에서 소성한 시편에서 플라이애쉬 보다 바탐애쉬를 첨가한 시편이 압축강도가 우수 하며, 바탐애쉬 첨가한 시편의 경우 압축강도 87.5 kgf/$cm^2$로 가장 우수 하였으며 인공골재로의 이용이 가능함을 알 수가 있다.

• Geomechanics and Engineering
• /
• 제20권1호
• /
• pp.55-66
• /
• 2020

The damage or failure of coal rock is accompanied by energy accumulation, dissipation and release. It is crucial to study the energy evolution characteristics of coal rock for rock mechanics and mining engineering applications. In this paper, coal specimens sourced from the Xinhe mine located in the Jining mining area of China were initially subjected to uniaxial compression, and the micro-parameters of the two-dimensional particle flow code (PFC^2D) model were calibrated according to the experimental test results. Then, the PFC^2D model was used to subject the specimens to substantial uniaxial compression, and the energy evolution laws of coal specimens with various schemes were presented. Finally, the elastic energy storage ratio m was investigated for coal rock, which described the energy conversion in coal specimens with various arrangements of preformed holes. The arrangement of the preformed holes significantly influenced the characteristics of the crack initiation stress and energy in the prepeak stage, whereas the characteristics of the cumulative crack number, failure pattern and elastic strain energy during the loading process were similar. Additionally, the arrangement of the preformed holes altered the proportion of elastic strain energy U_e in the total energy in the prepeak stage, and the probability of rock bursts can be qualitatively predicted.

• Structural Engineering and Mechanics
• /
• 제80권5호
• /
• pp.523-538
• /
• 2021

The mechanical behaviour and stability of coal mining engineering underground is significantly affected by ground water. In this study, nuclear magnetic resonance imaging (NMRI) technique was employed to determine the water distribution characteristics in coal specimens during saturation process, based on which the functional rule for water distribution was proposed. Then, using discrete element method (DEM), an innovative numerical modelling method was developed to simulate water-weakening effect on coal behaviour considering moisture content and water distribution. Three water distribution numerical models, namely surface-wetting model, core-wetting model and uniform-wetting model, were established to explore the water distribution influences. The feasibility and validity of the surface-wetting model were further demonstrated by comparing the simulation results with laboratory results. The investigation reveals that coal mechanical properties are affected by both water saturation coefficient and water distribution condition. For all water distribution models, micro-cracks always initiate and nucleate in the water-rich area and thus lead to distinct macro fracture characteristics. With the increase of water saturation coefficient, the failure of coal tends to be less violent with less cracks and ejected fragments. In addition, the core-wetting specimen is more sensitive to water than specimens with other water distribution models.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.145-151
• /
• 1991

화력발전소에서 부산되는 석탄회의 매립 성토재로서의 활용이나 폐기된 회사장의 재활용을 위 한 연구의 일환으로, 석탄회의 동적성질을 구명하기 위하여 석탄회를 시료토로하여 진동감쇠비를 구하였으며, 현장(회사장)에서 지반개량 전후 지중벽에 의한 감쇠 특성을 검토한 것이다. 석탄회에 시멘트 12%, 시멘트 9% 또는 약액(물유리), 시멘트 6%를 섞은 공시체 순으로 감쇠비가 크고, 동일 시료의 경우 공극비가 작을수록 감쇠비가 증가하는 것으로 보아 재질의 강성 증대에 따라 감쇠비가 커짐을 알 수 있었다. 회사장에서는 진동전파경로 대책으로 공구를 설치할 경우가 감쇠효과가 가장 크고, 지반을 개량할 경우는 개량지반의 장성이 클수록 감쇠효과가 있다. 이와같이 지반개량을 하게 되면 차수 및 강도증대효과 외에도 진동감쇠효과도 상당히 있는 것으로 판단된다.