• 터널과지하공간
• /
• 제1권
• /
• pp.66-74
• /
• 1991

The block theory with stereographic projection was applied and analyzed on the tunnel section of Samcheok Coal Mine. The results were as follows ; 1) Prevail orientations of discontinuity of sandstone around the main driftway of Samcheok Coal Mine were $(327^{\circ},\;44^{\circ}),\;(13^{\circ},\;24^{\circ}),\;(204^{\circ},\;65^{\circ})$ and $(225^{\circ},\;77^{\circ})$ in dip and dip direction, respectively. 2) Movable blocks of the site were 0110, 0111, 1110(roof), 0100, 0110, 1110(right wall) and 0001, 1001, 1011(left wall). Because of the direction of tunnel, blocks of the left wall was safe. thus key blocks were those of the roof and the right wall. Maximum height of key block was larger than the width of the tunnel but 2m of the yielded zone is expected in general for 5m width tunnel. 3) It is shown that block theory is applicable to large cavern in hard rock analysis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1171-1182
• /
• 2009

The purpose of this case study is stability security in Talus and Coal Shale. The failure possibility of Talus area is high because of ground loss. The Coal Shale area is very week and large scale sliding possibility is high.

• Geomechanics and Engineering
• /
• 제28권6호
• /
• pp.613-624
• /
• 2022

A study of the evolution of overburden fractures under the solid-fluid coupling state was conducted based on the geological and mining characteristics of the coal seam depth, weak strata cementation, and high-intensity mining in the mining areas of West China. These mining characteristics are key to achieving water conservation during mining or establishing groundwater reservoirs in coal mines. Based on the engineering background of the Daliuta Coal Mine, a non-hydrophilic simulation material suitable for simulating the weakly cemented rock masses in this area was developed, and a physical simulation test was carried out using a water-sand gushing test system. The study explored the spatial distribution and dynamic evolution of the fractured zone in the mining overburden under the coupling of stress and seepage. The experimental results show that the mining overburden can be vertically divided into the overall migration zone, the fracture extension zone and the collapse zone; additionally, in the horizontal direction, the mining overburden can be divided into the primary fracture zone, periodic fracture zone, and stop-fracture zone. The scope of groundwater flow in the overburden gradually expands with the mining of coal seams. When a stable water inrush channel is formed, other areas no longer generate new channels, and the unstable water inrush channels gradually close. Finally, the primary fracture area becomes the main water inrush channel for coal mines. The numerical simulation results indicate that the overlying rock breaking above the middle of the mined-out area allows the formation of the water-conducting channel. The water body will flow into the fracture extension zone with the shortest path, resulting in the occurrence of water bursting accidents in the mining face. The experimental research results provide a theoretical basis for the implementation of water conservation mining or the establishment of groundwater reservoirs in western mining areas, and this theoretical basis has considerable application and promotion value.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 국제학술회의
• /
• pp.337-341
• /
• 2008

• Geomechanics and Engineering
• /
• 제21권4호
• /
• pp.349-356
• /
• 2020

Rock brittleness, which is closely related to the failure modes, plays a significant role in the design and construction of many rock engineering applications. However, the brittle-ductile failure transition is mostly ignored by the current statistical damage constitutive model, which may misestimate the failure strength and failure behaviours of intact rock. In this study, a new statistical damage model considering rock brittleness is proposed for brittle to ductile behaviour of rocks using brittleness index (BI). Firstly, the statistical constitutive damage model is reviewed and a new statistical damage model considering failure mode transition is developed by introducing rock brittleness parameter-BI. Then the corresponding damage distribution parameters, shape parameter m and scale parameter F₀, are expressed in terms of BI. The shape parameter m has a positive relationship with BI while the scale parameter F₀ depends on both BI and ε_e. Finally, the robustness and correctness of the proposed damage model is validated using a set of experimental data with various confining pressure.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.257-267
• /
• 2016

Charts are used extensively in slope practical application to meet the need of quick assessment of rock slope design. However, Charts for estimating the shear strength of the rock mass of a slope are considerably limited. In this paper, based on the Hoek-Brown (HB) criterion which is widely used in rock slope engineering, we present charts which can be used to estimate the Mohr-Coulomb (MC) parameters angle of friction ${\phi}$ and cohesion c for given slopes. In order to present the proposed charts, we firstly present the derivation of the theoretical relationships between the MC parameters and ${\sigma}_{ci}/({\gamma}H)$ which is termed the strength ratio (SR). It is found that the values of $c/{\sigma}_{ci}$ and ${\phi}$ of a slope depend only on the magnitude of SR, regardless of the magnitude of the individual parameters ${\sigma}_{ci}$(uniaxial compressive strength), ${\gamma}$(unit weight) and H (slope height). Based on the relationships between the MC parameters and SR, charts are plotted to show the relations between the MC parameters and HB parameters. Using the proposed charts can make a rapid estimation of shear strength of rock masses directly from the HB parameters, slope geometry and rock mass properties for a given slope.

• 터널과지하공간
• /
• 제22권6호
• /
• pp.449-461
• /
• 2012

화력발전소에서 발생하는 석탄회를 지반침하의 방지를 위하여 갱내충전용으로 사용하고자 한다. 따라서 영동화력발전소에서 발생하는 석탄회를 이용하여 기본적인 물리적 특성 및 유동 특성을 파악하였으며, 한보탄광의 제1사갱을 대상으로 모형갱도를 제작하여 총 8회의 수압식 충전실험을 수행하였다. 석탄회의 비중은 2.34이고 입도분석결과 실트질 모래인 SM에 해당한다. Slump 시험 및 Flow 유동시험 결과 석탄회 70 wt,% 이하에서 액상형태로 나타나므로 모형충전실험에서는 석탄회 60 wt,%를 적용하였다. 모형충전시험결과 갱내수 유, 무에 상관없이 토출구를 사갱이나 수갱 바닥에 위치시키는 것이 충전효율을 향상시키는데 유리한 방법임을 확인하였다.

• Geomechanics and Engineering
• /
• 제21권4호
• /
• pp.371-377
• /
• 2020

There are currently three common methods for selecting excavation supports in Polish hard coal mines. While many factors are considered when choosing appropriate support, these do not include layering or cracking in the excavation ceiling. Although global classifications of rock mass are rarely used in hard coal mines, they are utilised much more frequently during the construction of underground structures such as tunnels. Mining classifications of rock mass have been developed (e.g., in Germany) and they rely on a number of factors but are often related to local mining and geological conditions. This paper discusses the selected findings of a study carried out on seven excavation sites with diverse mining and geological characteristics. Based on the collected data, two indicators were developed to describe rock mass quality. The first indicator is referred to as the roof lithology index WL and describes the quality of the excavation roof in terms of its layering and lithology. The second indicator is the crack intensity factor n and represents the amount of cracks in an excavation's roof. The correctness of the developed indicators was supported by reliable data from the excavation in which the designed support did not fulfill its task but was changed at a later stage, after calculating the proposed indicators.

• 자원환경지질
• /
• 제41권4호
• /
• pp.453-464
• /
• 2008

이 연구에서는 폐탄광 지역에서 발생하는 지반침하와 지하 채굴적 사이의 상관성을 지질, 지하구조, 탄층의 심도와 두께, 지하갱도의 분포 측면에서 분석하고자 하였다. 연구대상 지역은 강원도 삼척시 삼척탄전에 속하며, 채굴적 특성을 고려하지 않은 기존의 연구에서 수치지질도, 수치갱내도, 현장조사보고서 자료와 GIS의 공간분석기법을 적용하여 지반침하 취약성이 높게 분석된 지역에 해당된다. 연구지역에 대한 수치지질도 및 지반안정성 조사 보고서를 기반으로 연구지역내에서 지반침하가 관측된 지역의 분포, 지표 및 지하의 지질구조와 탄층의 분포현황을 분석하였고, 수치갱내도 자료를 이용하여 지하 갱도의 심도 및 중첩분포 현황을 분석하였다. 연구결과, 지표의 암석 강도 저하, 얕은 심도와 두꺼운 층후의 함탄층 존재가 지반침하 발생과 밀접한 관련이 있는 것으로 분석되었다. 또한, 다수의 중첩된 갱도의 분포 및 얕은 심도의 지하 갱도 존재, 단층의 존재 역시 지반침하발생에 영향을 주는 주요인으로 확인되었다. 지반침하 위험지역을 정량적으로 예측함에 있어, 연구결과로 나타난 지반침하 관련 요인을 추가로 데이터베이스화하여 폐탄광 지역별로 적합한 지반침하예측 모델을 구축한다면 폐탄광 지역의 지반침하위험 예측 및 예방에 매우 효과적일 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.529-540
• /
• 2020

Water inrush is a major hazard for mining and excavation in deep coal seams or rock masses. It can be attributed to the coalescence of rock fractures in rock mass due to the interaction of fractures, hydraulic flow and stress field. One of the key technical challenges is to understand the course and mechanism of fluid flows in rock joint networks and fracture propagation and hence to take measures to prevent the formation of water inrush channels caused by possible rock fracturing. Several case observations of fluid flowing in rock joint networks and coupled fracture propagation in underground coal roadways are shown in this paper. A number of numerical simulations were done using the recently developed flow coupling function in FRACOD which simulates explicitly the fracture initiation and propagation process. The study has demonstrated that the shortest path between the inlet and outlet in joint networks will become a larger fluid flow channel and those fractures nearest to the water source and the working faces become the main channel of water inrush. The fractures deeper into the rib are mostly caused by shearing, and slipping fractures coalesce with the joint, which connects the water source and eventually forming a water inrush channel.