• Journal of Climate Change Research
• /
• v.1 no.1
• /
• pp.13-20
• /
• 2010

Recently, the operation of construction equipments have increased by many construction project. So a respectable amount of greenhouse gas is expected from construction equipments. But the greenhouse gas emissions from construction equipment have been high uncertainty due investigation of a lack of activity data and emission factors in Korea. In this study, annual greenhouse gas emissions from construction equipment are estimated by IPCC's Tier 2 and Tier 3 method. These methods require emission factors, fuel consumption, average kilowatts and operating hours. As the results, the nationwide emission from construction equipments by Tier 2 and Tier 3 are calculated as $21,784kton-CO_2eq/year$ and $22,811kton-CO_2eq/year$ in 2008.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1481-1500
• /
• 2016

Device-to-Device (D2D) communication underlaying macro-small cell networks, as one of the promising technologies in the era of 5G, is able to improve spectral efficiency and increase system capacity. In this paper, we model the cross- and co-tier D2D communications in two-tier macro-small cell networks. To avoid the complicated interference for cross-tier D2D, we propose a mode selection scheme with a dedicated resource sharing strategy. For co-tier D2D, we formulate a joint optimization problem of power control and resource reuse with the aim of maximizing the overall outage capacity. To solve this non-convex optimization problem, we devise a heuristic algorithm to obtain a suboptimal solution and reduce the computational complexity. System-level simulations demonstrate the effectiveness of the proposed method, which can provide enhanced system performance and guarantee the quality-of-service (QoS) of all devices in two-tier macro-small cell networks. In addition, our study reveals the high potential of introducing cross- and co-tier D2D in small cell networks: i) cross-tier D2D obtains better performance at low and medium small cell densities than co-tier D2D, and ii) co-tier D2D achieves a steady performance improvement with the increase of small cell density.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.701-708
• /
• 2011

In this study, the emissions of GHG from general ships were calculated by Tier1 method based on the fuel consumption, and by Tier3 method based on the activities data such as power and SFOC of each engine, sailing characteristics (e.g. time and load factor, etc.) considering the ship type. In 2009, the emissions of GHG by Tier1 and Tier3 method were appeared 28.27 mega-ton $CO_{2eq}$ and 30.81 mega-ton $CO_{2eq}$. The emissions by Tier3 were slightly more than those by Tier1. We found that the values of the sailing characteristics for surveyed data are overestimated slightly. In the near future, more detailed researches for sailing characteristics considering ship types would be needed for sailing, anchoring, and berthing condition, etc.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.375-381
• /
• 2011

This study presents an analysis of $CO_2$ emission reduction effect on bus information system (BIS) which is operated to improve various services of bus transit such as rapid and on-time service. Although the Intergovernmental Panel on Climate Change (IPCC) released three methodological types of models for analyzing the amount of greenhouse gas reduction, this study used the Tier 3 method that is the most concrete one. A case study was performed to a 8.3 km section of Daejun-Chungjoo BIS system, and dataset required to the Tier 3 method was obtained from ITS-based surveillance systems. The study result showed that the reduction effect of $CO_2$ on BIS operation was yearly $39.45tCO_2/km$. Therefore, such effect can be potentially useful to a measurement of effectiveness (MOE) of BIS projects hereafter.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.4
• /
• pp.405-415
• /
• 2011

The objective of this study was to compare greenhouse gas emissions from road transportation by calculation methods (Tier 1, Teir 2, and Tier 3). Tier 1 based on 2006 IPCC guidelines default emission factor and amount of fuel consumption. The Tier 2 approach is the same as Tier 1 except that country-specific carbon contents of the fuel sold in road transport are used. Tier 2 based on emission factor of guidelines for local government greenhouse gas inventories (Korea Environment Corporation), the fuel consumption per one vehicle, and the registered motor vehicles. The Tier 3 approach requires detailed, country-specific data to generate activity-based emission factors for vehicle subcategories (National Institute of Environmental Research) and may involve national models. Tier 3 calculates emissions by multiplying emission factors by vehicle activity levels (e.g., VKT) for each vehicle subcategory and possible road type. VKT was estimated by using GIS road map and traffic volume of the section. The GHG average emission rate by the Tier 1 was 728,857 $tonCO_2eq$/yr, while Tier 2 and Tier 3 were 864,757 $tonCO_2eq$/yr and 661,710 $tonCO_2eq$/yr, respectively. Tier 3 was underestimated by 10.1 and 20.7 percent for the GHG emission observed by Tier 1 and Tier 2, respectively. Based on this study, we conclude that Tier 2 is reasonable GHG emissions than Tier 1 or Tier 3. But, further study is still needed to accurate GHG emission from Tier 3 method by expanding the traffic survey area and developing the model of local road traffic.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.329-339
• /
• 2022

Small cells, particularly femtocells, are regarded a promising solution for limited resources required to handle the increasing data demand. They usually boost wireless network capacity. While widespread usage of femtocells increases network gain, it also raises several challenges. Interference is one of such concerns. Interference management is also seen as a main obstacle in the adoption of two-tier networks. For example, placing femtocells in a traditional macrocell's geographic area. Interference comes in two forms: cross-tier and co-tier. There have been previous studies conducted on the topic of interference management. This study investigates the principle of categorization of interference management systems. Many methods exist in the literature to reduce or eliminate the impacts of co-tier, cross-tier, or a combination of the two forms of interference. Following are some of the ways provided to manage interference: FFR, Cognitive Femtocell and Cooperative Resource Scheduling, Beamforming Strategy, Transmission Power Control, and Clustering/Graph-Based. Approaches, which were proposed to solve the interference problem, had been presented for each category in this work.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1387-1401
• /
• 2016

When a closed access policy in which only an authorized user is allowed to access to a given base station (BS) has been employed in heterogeneous cellular networks, a macro-cell user is used to experience strong cross-tier interference from its adjacent small-cell BSs to which the user is not allowed to access. To mitigate this problem, it has been proposed that a small-cell BS employs a beamforming vector which is orthogonal to the channel of the victim user. However, this technique requires considerable mutual exchange of information among the macro-cell BS, the macro-cell user, and the small-cell BS. In this paper, we propose a cognitive beamforming scheme, in which a small-cell BS employs the beamforming orthogonal to the victim users' channel without any explicit mutual information exchange. Particularly, the small-cell BS finds small- and macro-cell users experiencing the co-tier and cross-tier interferences from it, respectively. Then, it employs a beamforming which is orthogonal to the victim users' channels to mitigate the co-tier and cross-tier interferences. Using the system-level simulation, we demonstrate that the proposed scheme effectively mitigates the cross-tier interference problem.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.4
• /
• pp.454-465
• /
• 2012

The Korean government decided to reduce 30% of GHG (greenhouse gas) emissions BAU in 2020. Since many efforts to reduce emissions are urgently needed in Korea, the central administrative organization urges local governments to establish their own reduction schemes. Among many GHG emission categories, the emission from mobile source in Gyeonggi Province accounted for 25.3% of total emissions in 2007 and further the emission from road transport sector occupied the most dominant portion in this transportation category. The objective of this study was to compare 3 types of GHG emissions from road transport sector in 31 local cities/counties of Gyeonggi Province, which have been estimated by Tier 1, Tier 2, and Tier 3 methodologies. As results, the GHG emission rates by the Tier 1 and Tier 2 were $19,991kt-CO_2\;Eq/yr$ and $18,511kt-CO_2\;Eq/yr$, respectively. On the other hand, the emission rate by Tier 3 excluding a branch road emission portion was $18,051kt-CO_2\;Eq/yr$. In addition, the total emission rate including all the main and branch road portions in Gyeonggi Province was $24,152kt-CO_2\;Eq/yr$, which was estimated by a new Tier 3 methodology. Based on this study, we could conclude that Tier 3 is a reasonable methodology than Tier 1 or Tier 2. However, more accurate and less uncertain methodology must be developed by expanding traffic survey areas and adopting a suitable model for traffic volumes.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.204-208
• /
• 2013

CO2 emission makes up more than 80% of whole green gas. Therefore CO2 is recognized as the main culprit of global warming. IPCC (Intergovernmental Panel on Climate Change) is advising the 3 methods measuring CO2 emission. TIER1 is measured CO2 emission by criteria the energy consumption, TIER2 measure by criteria the emission factor according to the emission control technique each kind of vehicle, TIER3 is measured by criteria the distance each kind of vehicle. Currently, the most of CO2 emission measurement is used by TIER1. But it is not standardized that CO2 emission measurement method have the factor as work condition each distance. Specially, it is not suggest that methodology has the condition changing load of equipment according to site condition and the same position work as construction equipment. So, this study is suggested the CO2 emission measurement methodology of construction equipment.

• Journal of Climate Change Research
• /
• v.1 no.1
• /
• pp.51-57
• /
• 2010

Recently the number of motorcycles has increased in urban area, and it is believed that motorcycle is one of the air pollution and greenhouse gas emission sources. But the greenhouse gas emission from motorcycle has been high uncertainty due investigation of a lack of activity data and emission factors in Korea. So in this study, the greenhouse gas emission from motorcycle is estimated by considering the population of moped and VKT(vehicle kilometers travelled) of motorcycle by recent other studies. And the emissions by IPCC Tier 2 and Tier 3 methodology are calculated and compared. As the results, the nationwide $CO_2$ equivalent emissions from motorcycles by Tier 2 and Tier 3 method are calculated as 2,758 kton/yr and 2,739 kton/yr in 2008. The contribution ratio of this emission is estimated as 2.7% in on-road transport sector.