• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.78-84
• /
• 2004

In order Nuruk to improve the quality of millet wine, a traditional Jeju cereal wine, yeasts and molds were isolated from 35 kinds of Nuruk collected nationwide. Isolated strains were screened for saccharification of starch and brewing of millet wine. Fermentation characteristics of millet wine with different types of Nuruk were also investigated. The average number of microbial populations in the Nuruk were $6.4{\times}10^5{\sim}4.5{\times}10^7\;cfu/g$ for molds and $1.4{\times}10^4{\sim}7.7{\times}10^7\;cfu/g$ for yeasts. Among the 169 strains of molds and 103 strains of yeasts, 16 strains were screened for saccharifying activity on starch as a substrate, and one yeast strain was screened for the brewing of millet wine. A8-3, supposed as Aspergillus sp., showed the highest enzyme activities of glucdamylase, ${\alpha}-amylase$ and xylanase while B23-3 strain, supposed as Rhizopus sp., showed the highest saccharifying activity. A10-4, supposed as Saccharomyces sp., showed the highest level of weight loss from $CO_2$ evolution, sugar and alcohol tolerance during fermentation. When the Nuruk was made after inoculation with the selected strains, saccharifying activity was higher for the co-cultivation of A8-3 and B23-3 than individual cultivation of each strain. Similar saccharifying activities were shown in both disc-type and pellet-type Nuruk. It was suggested that pellet-type Nuruk could improve fermentation yield. The collected Nuruk consisted of $10{\sim}13%$ moisture, $55{\sim}70%$ total sugar, $10{\sim}18%$ crude protein, $0.2{\sim}1.0%$ crude fat and $1.8{\sim}2.1%$ ash. The Nuruk made in this study was composed of $12{\sim}15%$ moisture, $61{\sim}71%$ total sugar, $15{\sim}20%$ crude protein, $0.4{\sim}1.5%$ crude fat and $1.1{\sim}1.5%$ ash.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1328-1334
• /
• 2010

Low-trans spread fat (LTSF) was produced by lipase-catalyzed synthesis of canola (CO) and fully hydrogenated soybean oil (FHSBO) at 65:35 (w/w). Blend of CO and FHSBO with 65:35 ratio was interesterified using Lipozyme TLIM (immobilized Thermomyces lanuginosus, 20% of total substrate) in a 1 L-batch type reactor at $70^{\circ}C$ with 500 rpm for 24 hr. Then, physicochemical melting properties of LTSF were compared with commercial spread fat. At $20^{\circ}C$, solid fat contents (SFC) of commercial spread fat as a control and LTSF were similar, showing 19.1 and 18.1%, respectively. Major compositional fatty acids of LTSF were C18:0, C18:1 and C18:2 (29.2, 41.8 and 13.3 wt%, respectively). Trans fatty acid content of the LTSF (0.2 wt%) was lower than that of commercial spread fat (5.5 wt%). In the RP-HPLC analysis from LTSF, major triacylglycerol (TAG) molecules were SOL (stearoyl-oleoyl-linoleyl), SOO, POS/PSP, and SOS. Also, polymorphic form and x-ray diffraction of LTSF showed coexistence of $\beta$' and $\beta$ form crystals.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.142-150
• /
• 2012

In this Study, Mo back electrode were deposited as the functions of various working pressure, deposition time and plasma per-treatment on sodalime glass (SLG) for application to CIGS thin film solar cell using by DC sputtering method, and were analyzed Mo change to $MoSe_2$ layer through selenization processes. And finally Mo back electrode characteristics were evaluated as application to CIGS device after Al/AZO/ZnO/CdS/CIGS/Mo/SLG fabrication. Mo films fabricated as a function of the working pressure from 1.3 to 4.9mTorr are that physical thickness changed to increase from 1.24 to 1.27 ${\mu}m$ and electrical characteristics of sheet resistance changed to increase from 0.195 to 0.242 ${\Omega}/sq$ as according to the higher working pressure. We could find out that Mo film have more dense in lower working pressure because positive Ar ions have higher energy in lower pressure when ions impact to Mo target, and have dominated (100) columnar structure without working pressure. Also Mo films fabricated as a function of the deposition time are that physical thickness changed to increase from 0.15 to 1.24 ${\mu}m$ and electrical characteristics of sheet resistance changed to decrease from 2.75 to 0.195 ${\Omega}/sq$ as according to the increasing of deposition time. This is reasonable because more thick metal film have better electrical characteristics. We investigated Mo change to $MoSe_2$ layer through selenization processes after Se/Mo/SLG fabrication as a function of the selenization time from 5 to 40 minutes. $MoSe_2$ thickness were changed to increase as according to the increasing of selenization time. We could find out that we have to control $MoSe_2$ thickness to get ohmic contact characteristics as controlling of proper selenization time. And we fabricated and evaluated CIGS thin film solar cell device as Al/AZO/ZnO/CdS/CIGS/Mo/SLG structures depend on Mo thickness 1.2 ${\mu}m$ and 0.6 ${\mu}m$. The efficiency of CIGS device with 0.6 ${\mu}m$ Mo thickness is batter as 9.46% because Na ion of SLG can move to CIGS layer more faster through thin Mo layer. The adhesion characteristics of Mo back electrode on SLG were improved better as plasma pre-treatment on SLG substrate before Mo deposition. And we could expect better efficiency of CIGS thin film solar cell as controlling of Mo thickness and $MoSe_2$ thickness depend on Na effect and selenization time.

• Microbiology and Biotechnology Letters
• /
• v.34 no.1
• /
• pp.7-14
• /
• 2006

Feather, generated in large quantities as a byproduct of commercial poultry processing, is almost pure keratin, which is not easily degradable by common professes. Four strains, SMMJ-2, FL-3, NO-4 and RM-12 were isolated from soil for production of extracellular keratinolytic protease. They were identified as Bacillus sp. based on their morphological and physiological characteristics. They shown high protease activity on 5.0% skim milk agar medium and produced a substrate like mucoid on keratin agar medium. Bacillus sp. SMMJ-2 had a faster production time for producing keratinolytic protease than other strains. This strain did not completely degrade whole chicken feather for five days in basal medium but completely degraded whole chicken feather when supplied with nitrogen source for 40hours in keratinolytic producing medium ($0.7%\;K_{2}HPO_{4},\;0.2%\;KH_{2}PO_{4},\;0.1%$ fructose, 1.2% whole chicken feather, $0.01%\;Na_{2}CO_3$, pH 7.0). When supplied with chicken feather as nitrogen source, keratinolytic protease activity was 89 units/ml/min. When soybean meal was used as nitrogen source, the keratinolytic protease production reached a maximum of 106 units/ml/min after 48 hours under $30^{\circ}C$, 180 agitation. To isolate the keratinolytic protease, the culture filtrate was precipitated with $(NH_4)_{2}SO_4$ and acetone. The recovery rate of keratinolytic protease was about 96% after treatment with 50% acetone. The enzyme was stable in the range of $30{\sim}50^{\circ}C$ and pH $6.0{\sim}12.0$.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.487-495
• /
• 2015

We carried out pH stability, chemical inhibition, chemical modification, and pH-dependent kinetic parameter assessments to further characterize protocatechuate 3,4-dioxygenase from Pseudomonas pseudoalcaligenes KF707. Protocatechuate 3,4-dioxygenase was stable in the pH range of 4.5~10.5. L-ascorbate and glutathione were competitive inhibitors with $K_{is}$ values of 0.17 mM and 0.86 mM, respectively. DL-dithiothreitol was a noncompetitive inhibitor with a $K_{is}$ value of 1.57 mM and a $K_{ii}$ value of 8.08 mM. Potassium cyanide, p-hydroxybenzoate, and sodium azide showed a noncompetitive inhibition pattern with $K_{is}$ values of 55.7 mM, 0.22 mM, and 15.64 mM, and $K_{ii}$ values of 94.1 mM, 8.08 mM, and 662.64 mM, respectively. $FeCl_{2}$ was the best competitive inhibitor with a $K_{is}$ value of $29{\mu}M$. $FeCl_{3}$, $MnCl_{2}$, $CoCl_{2}$, and $AlCl_{3}$ were also competitive inhibitors with $K_{is}$ values of 1.21 mM, 0.85 mM, 3.98 mM, and 0.21 mM, respectively. Other metal ions showed noncompetitive inhibition patterns. The pH-dependent kinetic parameter data showed that there may be at least two catalytic groups with pK values of 6.2 and 9.4 and two binding groups with pK values of 5.5 and 9.0. Lysine, cysteine, tyrosine, carboxyl, and histidine were modified by their own specific chemical modifiers, indicating that they are involved in substrate binding and catalysis.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.2
• /
• pp.99-116
• /
• 2016

We herein performed animal safety assessment in accordance with Good Laboratory Practice (GLP) regulations with the aim of developing sialic acid from glycomacropeptide (hereafter referred to as "GMP") as an index ingredient and functional component in functional foods. GMP is a type of whey protein derived from milk and a safe food, with multiple functions, such as antiviral activity. A test substance was produced containing 7% (w/w) sialic acid and mostly-hydrolyzed whey protein (hereafter referred to as "7%-GNANA") by enzymatic treatment of substrate GMP. The maximum intake test dose level was selected based on 5,000 mg/kg/day dose set for male NOEL (no-observed-effect-level) and female NOAEL (no-observed-adverse-effect-level) determined by a dose-range finding (DRF) test (GLP Center of Catholic University of Daegu, Report No. 15-NREO-001) that was previously conducted with the same test substance. To evaluate the toxicity of a repeated oral dose of the test substance in connection with the previous DRF study, 1,250, 2,500, and 5,000 mg/kg of the substance were administered by a probe into the stomachs of 6-week-old SPF Sprague-Dawley male and female rats for 90 d. Each test group consisted of 10 male and 10 female rats. To determine the toxicity index, all parameters, such as observation of common signs; measurements of body weight and food consumption; ophthalmic examination; urinalysis, electrolyte, hematological, and serum biochemical examination; measurement of organ weights during autopsy; and visual and histopathological examinations were conducted according to GLP standards. After evaluating the results based on the test toxicity assessment criteria, it was determined that NOAEL of the test substance, 7%-GNANA, was 5,000 mg/kg/day, for both male and female rats. No animal death was noted in any of the test groups, including the control group, during the study period, and there was no significant difference associated with test substance, as compared with the control group, with respect to general symptoms, body weight changes, food consumption, ophthalmic examination, urinalysis, hematological and serum biochemical examination, and electrolyte and blood coagulation tests during the administration period (P<0.05). As assessed by the effects of the test substance on organ weights, food consumption, autopsy, and histopathological safety, change in kidney weight as an indicator of male NOAEL revealed up to 20% kidney weight increase in the high-dose group (5,000 mg/kg/day) compared with the change in the control group. However, it was concluded that this effect of the test substance was minor. In the case of female rats, reduction of food consumption, increase of kidney weight, and decrease of thymus weight were observed in the high-dose group. The kidney weight increased by 10.2% (left) and 8.9% (right) in the high-dose group, with a slight dose-dependency compared with that of the control group. It was observed that the thymus weight decreased by 25.3% in the high-dose group, but it was a minor test substance-associated effect. During the autopsy, botryoid tumor was detected on the ribs of one subject in the high-dose group, but we concluded that the tumor has been caused by a naturally occurring (non-test) substance. Histopathological examination revealed lesions on the kidney, liver, spleen, and other organs in the low-dose test group. Since these lesions were considered a separate phenomenon, or naturally occurring and associated with aging, it was checked whether any target organ showed clear symptoms caused by the test substance. In conclusion, different concentrations of the test substance were fed to rats and, consequently, it was verified that only a minor effect was associated with the test substance in the high-dose (5,000 mg/kg/day) group of both male and female rats, without any other significant effects associated with the test substance. Therefore, it was concluded that NOAEL of 7%-GNANA (product name: Helicobactrol) with male and female rats as test animals was 5,000 mg/kg/day, and it thus was determined that the substance is safe for the ultimate use as an ingredient of health functional foods.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.757-769
• /
• 2013

A microorganism producing carboxymethylcellulase (CMCase) was isolated from seawater, identified as Bacillus velezensis by analyses of 16S rDNA and partial sequences of the gyrA, and designated as B. velezensis A-68. The optimal conditions for production of CMCase by B. velezensis A-68 were established using response surface methodology (RSM). The optimal concentrations of rice hulls and yeast extract, and initial pH of the medium for cell growth were 60.2 g/l, 7.38 g/l, and 7.18, respectively, whereas those for production of CMCase were 50.0 g/l, 5.00 g/l, and 7.30. The analysis of variance (ANOVA) implied that the most significant factor for cell growth as well as production of CMCase was yeast extract. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}7H_2O$, and $(NH_4)_2SO_4$ in the medium for cell growth were 7.50, 1.00, 0.10, and 0.80 g/l, respectively, which were the same as those for production of CMCase. The optimal temperatures for cell growth and production of CMCase were 30 and $35^{\circ}C$, respectively. The maximal production of CMCase under optimized conditions was 83.8 U/ml, which was 3.3 times higher than that before optimization. In this study, rice hulls, agro-byproduct, were developed as a substrate for production of CMCase and time for production of CMCase was reduced to 3 days using a newly isolated marine bacterium.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.477-484
• /
• 2006

This study was performed to know the potentialities of the fruits of Opuntia ficus-indica, as a medium for mushroom mycelial culture. Five mushroom mycelial (Agrocus blazei, Grifola frondosa, Hericium erinaceum, Innonotus obliquus, Phellinus linteus) were frown on the malt extract broth (MEB) and the cactus broth medium (CB). The submerged culture mixtures were extracted using equal volume of ethyl acetate, and their extract yields, total polyphenol contents, and some physiological activities were compared with each other Each extract from mycelial culture grown on CB medium showed remarkable enhancement in physiological activities compared with each counterpart grown on MEB. Among five mycelial cultures grown on CB medium, the extract yield and polyphenyl content were highest in the extract from Grifola frondosa (extract yield, 0.4 g/L and polyphenol content, 22.7%). Also, the extracts from Grifola frondosa showed the highest physiological activities, such as DPPH radical scavenging ($IC_{50}=362.9{\mu}g/ml$), xanthine oxidase inhibition (about 80% at $500{\mu}g/ml$), and superoxide radical scavenging (about 80% at $500{\mu}g/ml$), and NO production inhibition ($IC_{50}=43.1{\mu}g/ml$) in LPS-stimulated RAW 264.7 cells. This result suggests that the fruit of Opuntia ficus-indica can be used as a culture medium for improving the functional properties of various mushroom mycelia.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.541-548
• /
• 2002

This study, consisting of two experiments, was conducted to determine the effects of feeding heat treated protein and mineral complex (HPM) on milk production and composition, and ruminal fermentation of Holstein dairy cows. In in vitro experiment, HPM levels were 0, 0.2, 1 and 2%, and Timothy hay, which was substrate, was milled as 1 mm size, and the effects of HPM on pH, ammonia and VFA were analyzed after incubation times of 0, 6, 12, 24 and 48 h, respectively. The pH and ammonia production were not significantly different between treatments during the incubation. In addition, generally, total VFA and individual VFA were not affected by HPM on 0, 6 and 24 h. While, total VFA and individual VFA were increased in 0.2% and 1% of HPM supplemented treatments, but decreased in 2% of HPM treatment compared with control on 12 h. On 48 h, total VFA and individual VFA were increased in HPM treatments compared to control (P<0.05). However, A/P ratio was not affected by HPM supplementation. Gas production was higher in HPM treatment compared to control on 24 h (P<0.05) and 48 h (P<0.05). In lactating experiment, fourteen lactating Holstein cows were used for 4 months in a cross over experimental design. There were two treatments; no added HPM as a control and 0.2% of HPM added as a test treatment. Daily milk yield (P<0.001), 4% FCM (P<0.001), milk protein (P<0.05) and SNF (solid not fat; P<0.05) were increased in HPM treatment compared to control. While, milk fat, MUN (milk urea nitrogen) and SCC (somatic cell count) were not significantly different between treatments.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.690-700
• /
• 2012

The experiment was conducted by in vitro fermentation and bacterial community analysis to investigate the reduction of odorous compounds in response to the use of feed additives (FA) during carbohydrate overload in growing pigs. Soluble starch at 1% (control) and various FA at 0.1% Ginseng meal (FA1); Persimmon leaf (FA2); Gingko nut (FA3) and Oregano lippia (FA4) were added to fecal slurry and incubated anaerobically for 12 and 24 h. In vitro parameters and microbial diversity of the dominant bacteria following fermentation were analyzed using Denaturing Gradient Gel Electrophoresis (DGGE), band cloning and sequencing of the V3 region. Results showed that total gas production increased with the advancement of incubation (p<0.05). pH values of FAs and control groups were decreased except the FA4 group which increased somewhat from 12 to 24 h (p<0.05). Ammonia nitrogen ($NH_3$-N) and $H_2S$ gas concentrations were comparatively lower in both stages in FA4 treatment than in the other groups (p<0.05). Hence, $NH_3$-N concentrations in liquid phases were increased (p<0.05) from 12 to 24 h, but the trend was lowest in FA4 than in the other groups at both stages. The total VFA production was comparatively lower and butyrate levels were moderate in FA4 group than in the the other groups during both stages (p<0.05). Indirect odor-reducing compounds such as $NO_2$, $NO_3$ and $SO_4$ concentrations were higher in the FA4 and FA3 than in the other groups at 24 h (p<0.05). After fermentation, ten dominant bands appeared, six of which appeared in all samples and four in only the FA4 treated group. The total number of DGGE bands and diversity was higher in the FA4-group compared to other groups. Additionally, similarity indices were lowest (71%) in the FA4, which represented a different bacterial community compared with the other groups. These findings indicate that $NH_3$-N, $H_2S$ and VFA production was minimal, and pH was also better in the FA4 group than in the other groups. Furthermore, the conversion of odor-reducing indirect compounds or their intermediates was higher in the FA4 group in compared to the other groups. FA4 group generated less odorous products and more indirect products by in vitro fermentation at 24 h, and their microbial pattern appeared to differ from that of the other groups. These findings suggest that this particular FA could change the microbial population, which may have a beneficial effect on odor reduction. It is recommended that the oregano lippia may be supplied to growing pigs as FA along with excess carbohydrate sources to reduce the production of odorous compounds.